[OpenOCD-commit] Main OpenOCD repository branch, master, updated. v0.10.0-1333-g3a5f84f81

[OpenOCD-Gerrit <ope...@us...>]

This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Main OpenOCD repository".

The branch, master has been updated
       via  3a5f84f8187ce5b473f0eaafa0d68d1ab23ec0cd (commit)
      from  6962da00287c88c3fa89df8a8623a956735379db (commit)

Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.

- Log -----------------------------------------------------------------
commit 3a5f84f8187ce5b473f0eaafa0d68d1ab23ec0cd
Author: Antonio Borneo <bor...@gm...>
Date:   Sat Jul 4 19:38:00 2020 +0200

    doc: remove duplicated words
    
    Remove occurrences of duplicated words in the documentation.
    
    Change-Id: Ib6ef1607fc5e6387764be108b2b9c0c93ac10a62
    Signed-off-by: Antonio Borneo <bor...@gm...>
    Reviewed-on: http://openocd.zylin.com/5754
    Tested-by: jenkins
    Reviewed-by: Tarek BOCHKATI <tar...@gm...>
    Reviewed-by: Tomas Vanek <va...@fb...>

diff --git a/README b/README
index 2ff0329ed..fe70e725f 100644
--- a/README
+++ b/README
@@ -288,7 +288,7 @@ Parallel Port Dongles
 ---------------------
 
 If you want to access the parallel port using the PPDEV interface you
-have to specify both --enable-parport AND --enable-parport-ppdev, since the
+have to specify both --enable-parport AND --enable-parport-ppdev, since
 the later option is an option to the parport driver.
 
 The same is true for the --enable-parport-giveio option, you have to
diff --git a/doc/manual/release.txt b/doc/manual/release.txt
index 44de4464f..d1a6c6250 100644
--- a/doc/manual/release.txt
+++ b/doc/manual/release.txt
@@ -82,7 +82,7 @@ number will be zero (<code>z = 0</code>).  For a <i>major releases</i>,
 the minor version will @a also be zero (<code>y = 0, z = 0</code>).
 
 After these required numeric components, release version strings
-may contain tags such as as <em>-rc1</em> or <em>-rc2</em>.
+may contain tags such as <em>-rc1</em> or <em>-rc2</em>.
 These 'rc' tags indicate "release candidate" versions of the package.
 Like major/minor/micro numbers, these are updated
 as part of the release process.
diff --git a/doc/manual/server.txt b/doc/manual/server.txt
index 50fcac75e..8041c3df3 100644
--- a/doc/manual/server.txt
+++ b/doc/manual/server.txt
@@ -23,7 +23,7 @@ In early 2008, Oyvind Harboe and Duane Ellis had talked about how to
 create a reasonable GUI for OpenOCD - something that is non-invasive,
 simple to use and maintain, and does not tie OpenOCD to many other
 packages.  It would be wrong to "spider web" requirements into other
-external external packages.  That makes it difficult for developers to
+external packages.  That makes it difficult for developers to
 write new code and creates a support nightmare.
 
 In many ways, people had talked about the need for some type of
@@ -67,7 +67,7 @@ write scripts internally to help things, or we can write "C" code  that
 interfaces well with TCL.
 
 From there, the developers wanted to create an external front-end that
-would be @a very usable and that that @a any language could utilize,
+would be @a very usable and that @a any language could utilize,
 allowing simple front-ends to be (a) cross-platform (b) language
 agnostic, and (c) easy to develop and use.
 
diff --git a/doc/manual/style.txt b/doc/manual/style.txt
index e654be9c3..7191a4b0e 100644
--- a/doc/manual/style.txt
+++ b/doc/manual/style.txt
@@ -52,7 +52,7 @@ OpenOCD project.
   -# remove it entirely (git can retrieve the old version), or
   -# use an @c \#if/\#endif block.
 
-Finally, try to avoid lines of code that are longer than than 72-80 columns:
+Finally, try to avoid lines of code that are longer than 72-80 columns:
 
 - long lines frequently indicate other style problems:
   - insufficient use of static functions, macros, or temporary variables
diff --git a/doc/openocd.texi b/doc/openocd.texi
index 9f20e391d..6b461a30e 100644
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -1020,7 +1020,7 @@ will help support users of any board using that chip.
 @end quotation
 
 @item
-You may may need to write some C code.
+You may need to write some C code.
 It may be as simple as supporting a new FT2232 or parport
 based adapter; a bit more involved, like a NAND or NOR flash
 controller driver; or a big piece of work like supporting
@@ -5661,7 +5661,7 @@ at91samd bootloader 16384
 @deffn Command {at91samd dsu_reset_deassert}
 This command releases internal reset held by DSU
 and prepares reset vector catch in case of reset halt.
-Command is used internally in event event reset-deassert-post.
+Command is used internally in event reset-deassert-post.
 @end deffn
 
 @deffn Command {at91samd nvmuserrow}
@@ -5768,7 +5768,7 @@ The AT91SAM4L driver adds some additional commands:
 @deffn Command {at91sam4l smap_reset_deassert}
 This command releases internal reset held by SMAP
 and prepares reset vector catch in case of reset halt.
-Command is used internally in event event reset-deassert-post.
+Command is used internally in event reset-deassert-post.
 @end deffn
 @end deffn
 
@@ -5809,7 +5809,7 @@ processor to be halted.
 @deffn Command {atsame5 dsu_reset_deassert}
 This command releases internal reset held by DSU
 and prepares reset vector catch in case of reset halt.
-Command is used internally in event event reset-deassert-post.
+Command is used internally in event reset-deassert-post.
 @end deffn
 
 @deffn Command {atsame5 userpage}
@@ -8392,7 +8392,7 @@ and any buffered trace data is invalidated.
 
 @itemize
 @item @var{type} ... describing how data accesses are traced,
-when they pass any ViewData filtering that that was set up.
+when they pass any ViewData filtering that was set up.
 The value is one of
 @option{none} (save nothing),
 @option{data} (save data),
@@ -8740,7 +8740,7 @@ and any other core-specific commands that may be available.
 
 @deffn Command {arm7_9 dbgrq} [@option{enable}|@option{disable}]
 Displays the value of the flag controlling use of the
-the EmbeddedIce DBGRQ signal to force entry into debug mode,
+EmbeddedIce DBGRQ signal to force entry into debug mode,
 instead of breakpoints.
 If a boolean parameter is provided, first assigns that flag.
 

-----------------------------------------------------------------------

Summary of changes:
 README                 |  2 +-
 doc/manual/release.txt |  2 +-
 doc/manual/server.txt  |  4 ++--
 doc/manual/style.txt   |  2 +-
 doc/openocd.texi       | 12 ++++++------
 5 files changed, 11 insertions(+), 11 deletions(-)


hooks/post-receive
-- 
Main OpenOCD repository