[OpenOCD-commit] Main OpenOCD repository branch, master, updated. v0.10.0-1079-g22df29eee

[OpenOCD-Gerrit <ope...@us...>]

This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Main OpenOCD repository".

The branch, master has been updated
       via  22df29eee8033be5dd9bdf2429701fa2252dd80b (commit)
      from  35f846fd52e27fabcdea383a6be5056a9213c939 (commit)

Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.

- Log -----------------------------------------------------------------
commit 22df29eee8033be5dd9bdf2429701fa2252dd80b
Author: Tarek BOCHKATI <tar...@gm...>
Date:   Wed Feb 12 12:14:06 2020 +0100

    tcl/board: update ST NUCLEO-H745ZI-Q configuration file to use dapdirect
    
    this board embeds and STLINK DAP capable firmware
    
    Change-Id: I276e9f44ad6cf7d1ff664898bbc884676bdbc967
    Signed-off-by: Tarek BOCHKATI <tar...@gm...>
    Reviewed-on: http://openocd.zylin.com/5316
    Reviewed-by: Tomas Vanek <va...@fb...>
    Tested-by: jenkins
    Reviewed-by: Antonio Borneo <bor...@gm...>

diff --git a/tcl/board/st_nucleo_h745zi.cfg b/tcl/board/st_nucleo_h745zi.cfg
index bb8a396b5..22d36f686 100644
--- a/tcl/board/st_nucleo_h745zi.cfg
+++ b/tcl/board/st_nucleo_h745zi.cfg
@@ -1,16 +1,14 @@
 # This is an ST NUCLEO-H745ZI-Q board with single STM32H745ZITx chip.
 
-source [find interface/stlink.cfg]
-transport select hla_swd
+source [find interface/stlink-dap.cfg]
+transport select dapdirect_swd
 
-# ST-Link HLA interface do not support multi-AP debugging
-# then setting DUAL_CORE and USE_CTI has no effect, because
-# it will fall back to single core configuration
+# STM32H745xx devices are dual core (Cortex-M7 and Cortex-M4)
 set DUAL_CORE 1
+
+# enable CTI for cross halting both cores
 set USE_CTI 1
 
 source [find target/stm32h7x_dual_bank.cfg]
 
-# when using ST-Link HLA adapter, DBGMCU accesses are done via AP0
-# unfortunately DBGMCU is not accessible when SRST is asserted
 reset_config srst_only

-----------------------------------------------------------------------

Summary of changes:
 tcl/board/st_nucleo_h745zi.cfg | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)


hooks/post-receive
-- 
Main OpenOCD repository