[OpenOCD-commit] Main OpenOCD repository branch, master, updated. v0.10.0-1075-gda181fc3e

[OpenOCD-Gerrit <ope...@us...>]

This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Main OpenOCD repository".

The branch, master has been updated
       via  da181fc3ecda55e73544c8c4fb86e3e82d2dc0c9 (commit)
       via  46176304562951ec41b6c257124d88c6707f4c3d (commit)
      from  a6dacdff58ef36fcdac00c53ec27f19de1fbce0d (commit)

Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.

- Log -----------------------------------------------------------------
commit da181fc3ecda55e73544c8c4fb86e3e82d2dc0c9
Author: Leonard Crestez <leo...@nx...>
Date:   Sat Feb 1 02:02:04 2020 +0200

    tcl/board: Add imx8mp-evk
    
    Board includes an internal adapter (interface/ftdi/imx8mp-evk.cfg) and a
    standard external ARM-10 connector.
    
    Change-Id: Ibb301011665b1edfb95be1213d8100143f6839dd
    Signed-off-by: Leonard Crestez <leo...@nx...>
    Reviewed-on: http://openocd.zylin.com/5427
    Tested-by: jenkins
    Reviewed-by: Tomas Vanek <va...@fb...>

diff --git a/tcl/board/imx8mp-evk.cfg b/tcl/board/imx8mp-evk.cfg
new file mode 100644
index 000000000..97a303ac7
--- /dev/null
+++ b/tcl/board/imx8mp-evk.cfg
@@ -0,0 +1,15 @@
+#
+# configuration file for NXP MC-IMX8MP-EVK
+#
+# Board includes FTDI-based JTAG adapter: interface/ftdi/imx8mp-evk.cfg
+#
+
+transport select jtag
+adapter speed 1000
+reset_config srst_only
+adapter srst delay 100
+
+set CHIPNAME imx8mp
+set CHIPCORES 4
+
+source [find target/imx8m.cfg]

commit 46176304562951ec41b6c257124d88c6707f4c3d
Author: Leonard Crestez <leo...@nx...>
Date:   Sat Feb 1 01:53:35 2020 +0200

    tcl/interface/ftdi: Add imx8mp-evk internal JTAG interface
    
    The imx8mp-evk board has a FT4232H chip connected to the chip's JTAG
    pins.
    
    Switching between this on-board interface and the external ARM-10
    connector is controlled by an GPIO which is behind an i2c expander
    connected to the same FTDI chip.
    
    Switching can be performed using the NXP bcu tool:
    
            https://github.com/NXPmicro/bcu
    
    Change-Id: Ic910515f76eaf09ea6d0f755b026fb09cf09ccfc
    Signed-off-by: Leonard Crestez <leo...@nx...>
    Reviewed-on: http://openocd.zylin.com/5426
    Tested-by: jenkins
    Reviewed-by: Tomas Vanek <va...@fb...>

diff --git a/tcl/interface/ftdi/imx8mp-evk.cfg b/tcl/interface/ftdi/imx8mp-evk.cfg
new file mode 100644
index 000000000..4e04e8cd7
--- /dev/null
+++ b/tcl/interface/ftdi/imx8mp-evk.cfg
@@ -0,0 +1,28 @@
+#
+# Configuration file for NXP MC-IMX8MP-EVK on-board internal JTAG
+#
+# Using this interface requires enabling "remote mode" for the board using the
+# NXP bcu tool (see https://github.com/NXPmicro/bcu)
+#
+#	bcu set_gpio remote_en 1 -board=imx8mpevk
+#
+# The REMOTE_EN gpio is accessible through the same FTDI adapter but it's
+# behind an I2C GPIO expander.
+#
+
+adapter driver ftdi
+ftdi_vid_pid 0x0403 0x6011
+ftdi_channel 0
+
+ftdi_layout_init 0x00f8 0x000b
+
+ftdi_layout_signal RESET_B	-data 0x0010 -oe 0x0010
+# Called SYS_nRST in schematics
+ftdi_layout_signal nSRST	-data 0x0020 -oe 0x0020
+ftdi_layout_signal IO_nRST	-data 0x0040 -oe 0x0040
+ftdi_layout_signal ONOFF_B	-data 0x0080 -oe 0x0080
+
+ftdi_layout_signal GPIO1	-data 0x0100 -oe 0x0100
+ftdi_layout_signal GPIO2	-data 0x0200 -oe 0x0200
+ftdi_layout_signal GPIO3	-data 0x0400 -oe 0x0400
+ftdi_layout_signal GPIO4	-data 0x0800 -oe 0x0800

-----------------------------------------------------------------------

Summary of changes:
 tcl/board/imx8mp-evk.cfg          | 15 +++++++++++++++
 tcl/interface/ftdi/imx8mp-evk.cfg | 28 ++++++++++++++++++++++++++++
 2 files changed, 43 insertions(+)
 create mode 100644 tcl/board/imx8mp-evk.cfg
 create mode 100644 tcl/interface/ftdi/imx8mp-evk.cfg


hooks/post-receive
-- 
Main OpenOCD repository