Re: [OpenOCD-user] Error: unable to open ftdi device

[<Pet...@t-...>]

Hello Paul,

I haven´t the schematics but I can try to get them.

But I have the original config file which is running successful at connecting with a linux machine:

#
# Joern Kaipf's OOCDLink
#
# http://www.joernonline.de/contrexx2/cms/index.php?page=126
#

interface ft2232
ft2232_layout oocdlink
ft2232_vid_pid 0x0403 0x6010
adapter_khz 100


This is an old debug interface. That`s the reason why you have written to me at 6, december 2018:

"Please use ftdi interface instead."

Best regards,
Peter

-----Original-Nachricht-----
Betreff: Re: [OpenOCD-user] Error: unable to open ftdi device
Datum: 2019-03-29T13:15:42+0100
Von: "Paul Fertser" <fer...@gm...>
An: "Pet...@t-..." <Pet...@t-...>

On Fri, Mar 29, 2019 at 01:00:40PM +0100, Pet...@t-... wrote:
> do you mean with debug adapter the device connected to the USB? On
> the mikrocontroller baord it is an FTDI device FT2232D 1311.

But you have the schematics for the board so you should be able to
write a proper config file matchig the schematics.

> I have no further information. That board is already successfully
> running wiht OpenOCD on a linux machine.

Then please try to use _exactly_ the same config that works with
OpenOCD on GNU/Linux.

-- 
Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software!
mailto:fer...@gm...