Re: [OpenOCD-devel] P&E Multilink Support

[Augusto F. G. <aug...@gm...>]

I'm involved in a project with a team. We only have the Multilink 
debugger (standalone, not the OpenSDA), and I thought that OpenOCD 
supported this adapter. I also have a STLINK-V2, but it didn't worked 
with the s9keaz128amlk microcontroller (it finds an incorrect ID). I've 
used the JLink adapter before with success on OpenOCD. Do you know why 
the STLINK-V2 wouldn't work with NXP KEA micros?


Thanks.


Em 4 de out de 2016 3:48 AM, "Paul Fertser" <fer...@gm... 
<mailto:fer...@gm...>> escreveu:

    On Mon, Oct 03, 2016 at 06:22:10PM -0300, Augusto Fraga Giachero wrote:
     > How hard it is to add support to the P&E Multilink adapter?

    Probably pretty hard since the protocol would need to be RE. But you
    can use CMSIS-DAP firmware (preferrably from mbed I'd say) instead on
    many Kinetis-based P&E adapters, have you considered that option?

    --
    Be free, use free (http://www.gnu.org/philosophy/free-sw.html
    <http://www.gnu.org/philosophy/free-sw.html>) software!
    mailto:fer...@gm... <mailto:fer...@gm...>