Re: [OpenOCD-user] FT2232 device

[Juan C. <jce...@nu...>]

Try using zadig as is shown in this open project

http://www.proyecto-ciaa.com.ar/devwiki/doku.php?id=desarrollo:firmware:instalacion_sw

It uses FT2232 in the same way you need

Good luck
Juan




El 31 de julio de 2016 5:25:31 PM GMT-03:00, Trampas Stern <tr...@gm...> escribió:
>I have a FT2232 device I am trying to use where the first channel is
>JTAG
>and second is used for debug UART.
>
>When I configure the first channel for WinUSB driver OpenOCD can not
>connect. When I configure the parent of the composite device to use
>WinUSB
>OpenOCD will connect but I loose the UART/com port.   I was wondering
>if I
>am missing something or if it is even possible to use the second port
>on
>the FT2232 with OpenOCD connected to first port?
>
>Thanks
>Trampas
>
>
>------------------------------------------------------------------------
>
>------------------------------------------------------------------------------
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>OpenOCD-user mailing list
>Ope...@li...
>https://lists.sourceforge.net/lists/listinfo/openocd-user