[openocd-svn] Main OpenOCD repository branch, master, updated. v0.4.0-274-g6315147

[Spencer O. <nt...@us...>]

This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Main OpenOCD repository".

The branch, master has been updated
       via  631514724db1772f9e08e1dcb564fe9205def57e (commit)
      from  d944a0bed73c63fe52cf546a7121823318e8b593 (commit)

Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.

- Log -----------------------------------------------------------------
commit 631514724db1772f9e08e1dcb564fe9205def57e
Author: Spencer Oliver <nt...@us...>
Date:   Thu Jun 3 10:20:06 2010 +0100

    NEWS: updates
    
    Add new features since 0.4.0 release.
    
    Signed-off-by: Spencer Oliver <nt...@us...>

diff --git a/NEWS b/NEWS
index a744da3..db4485d 100644
--- a/NEWS
+++ b/NEWS
@@ -13,10 +13,14 @@ JTAG Layer:
 	   	jtag_khz	... is now adapter_khz
 		jtag_nsrst_delay ... is now adapter_nsrst_delay
 		jtag_nsrst_assert_width ... is now adapter_nsrst_assert_width
+	Support Voipac VPACLink JTAG Adapter.
 
 Boundary Scan:
 
 Target Layer:
+	ARM:
+		- basic semihosting support (ARMv7M).
+		- renamed "armv7m" command prefix as "arm"
 	MIPS:
 		- "ejtag_srst" variant removed. The same functionality is
 		  obtained by using "reset_config none".
@@ -31,9 +35,17 @@ Flash Layer:
 		re-enabling hardware debugging).
 	PIC32MX now uses algorithm for flash programming, this
 		has increased the performance by approx 96%.
+	New 'pic32mx unlock' cmd to remove readout protection.
+	New STM32 Value Line Support.
+	New 'virtual' flash driver, used to associate other addresses
+		with a flash bank. See pic32mx.cfg for usage.
+	New iMX27 NAND flash controller driver.
 
 Board, Target, and Interface Configuration Scripts:
 	Support IAR LPC1768 kickstart board (by Olimex)
+	Support Voipac PXA270/PXA270M module.
+	New $PARPORTADDR tcl variable used to change default
+		parallel port address used.
 
 Core Jim/TCL Scripting:
 	New "add_script_search_dir" command, behaviour is the same

-----------------------------------------------------------------------

Summary of changes:
 NEWS |   12 ++++++++++++
 1 files changed, 12 insertions(+), 0 deletions(-)


hooks/post-receive
-- 
Main OpenOCD repository