[openocd-svn] Main OpenOCD repository branch, master, updated. v0.4.0-202-gfe60480

[Øyvind H. <go...@us...>]

This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Main OpenOCD repository".

The branch, master has been updated
       via  fe60480b7a8f5c94147e3185bae235241c33c9ce (commit)
      from  14f4606dcb0533ab64562406edd157008108e0db (commit)

Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.

- Log -----------------------------------------------------------------
commit fe60480b7a8f5c94147e3185bae235241c33c9ce
Author: Øyvind Harboe <oyv...@zy...>
Date:   Tue May 4 07:25:30 2010 +0200

    cfi: made som info output debug output
    
    E.g. how much target memory that is used during flashing
    is debug info.
    
    Signed-off-by: Øyvind Harboe <oyv...@zy...>

diff --git a/src/flash/nor/cfi.c b/src/flash/nor/cfi.c
index a64d78f..f88f16c 100644
--- a/src/flash/nor/cfi.c
+++ b/src/flash/nor/cfi.c
@@ -1141,7 +1141,7 @@ static int cfi_intel_write_block(struct flash_bank *bank, uint8_t *buffer, uint3
 	busy_pattern_val  = cfi_command_val(bank, 0x80);
 	error_pattern_val = cfi_command_val(bank, 0x7e);
 
-	LOG_INFO("Using target buffer at 0x%08" PRIx32 " and of size 0x%04" PRIx32, source->address, buffer_size);
+	LOG_DEBUG("Using target buffer at 0x%08" PRIx32 " and of size 0x%04" PRIx32, source->address, buffer_size);
 
 	/* Programming main loop */
 	while (count > 0)
@@ -1162,7 +1162,7 @@ static int cfi_intel_write_block(struct flash_bank *bank, uint8_t *buffer, uint3
 		buf_set_u32(reg_params[5].value, 0, 32, busy_pattern_val);
 		buf_set_u32(reg_params[6].value, 0, 32, error_pattern_val);
 
-		LOG_INFO("Write 0x%04" PRIx32 " bytes to flash at 0x%08" PRIx32 , thisrun_count, address);
+		LOG_DEBUG("Write 0x%04" PRIx32 " bytes to flash at 0x%08" PRIx32 , thisrun_count, address);
 
 		/* Execute algorithm, assume breakpoint for last instruction */
 		retval = target_run_algorithm(target, 0, NULL, 7, reg_params,

-----------------------------------------------------------------------

Summary of changes:
 src/flash/nor/cfi.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)


hooks/post-receive
-- 
Main OpenOCD repository