From: Øyvind H. <go...@us...> - 2009-12-01 10:09:00
|
This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Main OpenOCD repository". The branch, master has been updated via 48edd58c3941c562a5a7ea78432a28e72108bbe4 (commit) from 445da543d8db868466dcef7e23f75b3c2b54bc72 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- commit 48edd58c3941c562a5a7ea78432a28e72108bbe4 Author: Ãyvind Harboe <oyv...@zy...> Date: Tue Dec 1 10:03:15 2009 +0100 target: at91eb40a.cfg is a board, not a target. Also updated to use target name when creating flash and set jtag_khz to 16000. Signed-off-by: Ãyvind Harboe <oyv...@zy...> diff --git a/tcl/target/at91eb40a.cfg b/tcl/board/at91eb40a.cfg similarity index 92% rename from tcl/target/at91eb40a.cfg rename to tcl/board/at91eb40a.cfg index e78ccea..62d3c9c 100644 --- a/tcl/target/at91eb40a.cfg +++ b/tcl/board/at91eb40a.cfg @@ -43,7 +43,7 @@ arm7_9 dcc_downloads enable #flash driver set _FLASHNAME $_CHIPNAME.flash -flash bank $_FLASHNAME ecosflash 0x01000000 0x200000 2 2 0 ecos/at91eb40a.elf +flash bank $_FLASHNAME ecosflash 0x01000000 0x200000 2 2 $_TARGETNAME ecos/at91eb40a.elf # required for usable performance. Used for lots of # other things than flash programming. @@ -60,3 +60,6 @@ $_TARGETNAME configure -event reset-init { mww 0xffff0010 0x100 mww 0xffff0034 0x100 } + +# This target is pretty snappy... +jtag_khz 16000 ----------------------------------------------------------------------- Summary of changes: tcl/{target => board}/at91eb40a.cfg | 5 ++++- 1 files changed, 4 insertions(+), 1 deletions(-) rename tcl/{target => board}/at91eb40a.cfg (92%) hooks/post-receive -- Main OpenOCD repository |