[openocd-svn] Main OpenOCD repository branch, master, updated. v0.2.0-422-g19b84da

[David B. <dbr...@us...>]

This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "Main OpenOCD repository".

The branch, master has been updated
       via  19b84dafb0a9902df78aa021330cbcfae93a89a7 (commit)
      from  e98817c4636f45b45db4332d2a5fbf36676f2f39 (commit)

Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.

- Log -----------------------------------------------------------------
commit 19b84dafb0a9902df78aa021330cbcfae93a89a7
Author: David Brownell <dbr...@us...>
Date:   Sun Oct 25 14:03:14 2009 -0700

    ARM: rename "arm9tdmi vector_catch" to "arm9 ..."
    
    And update doc accordingly.  That EmbeddedICE register was
    introduced for ARM9TDMI and then carried forward into most
    new chips that use EmbeddedICE.

diff --git a/NEWS b/NEWS
index 81fce82..436dab7 100644
--- a/NEWS
+++ b/NEWS
@@ -19,6 +19,8 @@ Target Layer:
 	VERY EARLY Cortex-A8 and ARMv7A support
 	Updated BeagleBoard.org hardware support
     New commands for use with XScale processors: "xscale vector_table"
+    ARM9
+	name change:  "arm9 vector_catch" not "arm9tdmi vector_catch"
     ARM11
 	single stepping support for i.MX31
 	bugfix for missing "arm11" prefix on "arm11 memwrite ..."
diff --git a/TODO b/TODO
index fa9477a..611bdd3 100644
--- a/TODO
+++ b/TODO
@@ -138,9 +138,8 @@ Once the above are completed:
 - regression: "reset halt" between 729(works) and 788(fails): @par
 https://lists.berlios.de/pipermail/openocd-development/2009-July/009206.html
 - ARM7/9:
-  - clean up "arm9tdmi vector_catch". Should be available for other arm9
-  (e.g. arm926ejs) and some(???) arm7 cores. @par 
-https://lists.berlios.de/pipermail/openocd-development/2009-October/011488.html  
+  - clean up "arm9tdmi vector_catch". Available for some arm7 cores? @par
+https://lists.berlios.de/pipermail/openocd-development/2009-October/011488.html
 https://lists.berlios.de/pipermail/openocd-development/2009-October/011506.html
   - add reset option to allow programming embedded ice while srst is asserted.
   Some CPUs will gate the JTAG clock when srst is asserted and in this case,
diff --git a/doc/openocd.texi b/doc/openocd.texi
index 6760994..b91fb3b 100644
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -768,7 +768,7 @@ early boot code, which performs some of the same actions
 that the @code{reset-init} event handler does.
 
 @item
-Likewise, the @command{arm9tdmi vector_catch} command (or
+Likewise, the @command{arm9 vector_catch} command (or
 @cindex vector_catch
 its siblings @command{xscale vector_catch}
 and @command{cortex_m3 vector_catch}) can be a timesaver
@@ -5028,7 +5028,7 @@ at @var{address} for @var{length} bytes.
 This is a software breakpoint, unless @option{hw} is specified
 in which case it will be a hardware breakpoint.
 
-(@xref{arm9tdmi vector_catch}, or @pxref{xscale vector_catch},
+(@xref{arm9 vector_catch}, or @pxref{xscale vector_catch},
 for similar mechanisms that do not consume hardware breakpoints.)
 @end deffn
 
@@ -5453,18 +5453,13 @@ ARM9-family cores are built around ARM9TDMI or ARM9E (including ARM9EJS)
 integer processors.
 Such cores include the ARM920T, ARM926EJ-S, and ARM966.
 
-For historical reasons, one command shared by these cores starts
-with the @command{arm9tdmi} prefix.
-This is true even for ARM9E based processors, which implement the
-ARMv5TE architecture instead of ARMv4T.
-
 @c 9-june-2009:  tried this on arm920t, it didn't work.
 @c no-params always lists nothing caught, and that's how it acts.
 @c 23-oct-2009:  doesn't work _consistently_ ... as if the ICE
 @c versions have different rules about when they commit writes.
 
-@anchor{arm9tdmi vector_catch}
-@deffn Command {arm9tdmi vector_catch} [@option{all}|@option{none}|list]
+@anchor{arm9 vector_catch}
+@deffn Command {arm9 vector_catch} [@option{all}|@option{none}|list]
 @cindex vector_catch
 Vector Catch hardware provides a sort of dedicated breakpoint
 for hardware events such as reset, interrupt, and abort.
diff --git a/src/target/arm9tdmi.c b/src/target/arm9tdmi.c
index 12b68ae..e3c6ca3 100644
--- a/src/target/arm9tdmi.c
+++ b/src/target/arm9tdmi.c
@@ -1061,14 +1061,12 @@ int arm9tdmi_register_commands(struct command_context_s *cmd_ctx)
 	command_t *arm9tdmi_cmd;
 
 	retval = arm7_9_register_commands(cmd_ctx);
-	arm9tdmi_cmd = register_command(cmd_ctx, NULL, "arm9tdmi",
+	arm9tdmi_cmd = register_command(cmd_ctx, NULL, "arm9",
 			NULL, COMMAND_ANY,
-			"arm9tdmi specific commands");
+			"arm9 specific commands");
 	register_command(cmd_ctx, arm9tdmi_cmd, "vector_catch",
 			handle_arm9tdmi_catch_vectors_command, COMMAND_EXEC,
-			"arm9 vector_catch [all|none|reset|undef|swi|pabt|dabt|irq|fiq] - separate vectors to catch by space");
-
-
+			"arm9 vector_catch [all|none|reset|undef|swi|pabt|dabt|irq|fiq] ...");
 
 	return retval;
 }

-----------------------------------------------------------------------

Summary of changes:
 NEWS                  |    2 ++
 TODO                  |    5 ++---
 doc/openocd.texi      |   13 ++++---------
 src/target/arm9tdmi.c |    8 +++-----
 4 files changed, 11 insertions(+), 17 deletions(-)


hooks/post-receive
-- 
Main OpenOCD repository