Menu
▾
▴
[Openocd-svn] r2665 - trunk/tcl/target
|
From: oharboe at B. <oh...@ma...> - 2009-09-04 07:17:09
|
Author: oharboe
Date: 2009-09-04 07:17:03 +0200 (Fri, 04 Sep 2009)
New Revision: 2665
Modified:
trunk/tcl/target/aduc702x.cfg
trunk/tcl/target/at91eb40a.cfg
trunk/tcl/target/at91r40008.cfg
trunk/tcl/target/at91sam3uXX.cfg
trunk/tcl/target/at91sam7sx.cfg
trunk/tcl/target/at91sam9260.cfg
trunk/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg
trunk/tcl/target/c100.cfg
trunk/tcl/target/cs351x.cfg
trunk/tcl/target/epc9301.cfg
trunk/tcl/target/feroceon.cfg
trunk/tcl/target/imx21.cfg
trunk/tcl/target/imx27.cfg
trunk/tcl/target/imx31.cfg
trunk/tcl/target/imx35.cfg
trunk/tcl/target/is5114.cfg
trunk/tcl/target/ixp42x.cfg
trunk/tcl/target/lpc1768.cfg
trunk/tcl/target/lpc2103.cfg
trunk/tcl/target/lpc2124.cfg
trunk/tcl/target/lpc2129.cfg
trunk/tcl/target/lpc2148.cfg
trunk/tcl/target/lpc2294.cfg
trunk/tcl/target/lpc2378.cfg
trunk/tcl/target/lpc2478.cfg
trunk/tcl/target/mega128.cfg
trunk/tcl/target/netx500.cfg
trunk/tcl/target/pic32mx.cfg
trunk/tcl/target/pxa270.cfg
trunk/tcl/target/sam7se512.cfg
trunk/tcl/target/sam7x256.cfg
trunk/tcl/target/samsung_s3c2410.cfg
trunk/tcl/target/samsung_s3c2440.cfg
trunk/tcl/target/samsung_s3c2450.cfg
trunk/tcl/target/samsung_s3c4510.cfg
trunk/tcl/target/samsung_s3c6410.cfg
trunk/tcl/target/sharp_lh79532.cfg
trunk/tcl/target/smp8634.cfg
trunk/tcl/target/stm32.cfg
trunk/tcl/target/str710.cfg
trunk/tcl/target/str730.cfg
trunk/tcl/target/str750.cfg
trunk/tcl/target/str912.cfg
trunk/tcl/target/test_reset_syntax_error.cfg
trunk/tcl/target/xba_revA3.cfg
Log:
David Brownell <da...@pa...> "set _TARGETNAME ..." cleanup
Modified: trunk/tcl/target/aduc702x.cfg
===================================================================
--- trunk/tcl/target/aduc702x.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/aduc702x.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -36,7 +36,7 @@
##
## Target configuration
##
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME
# allocate the entire SRAM as working area
Modified: trunk/tcl/target/at91eb40a.cfg
===================================================================
--- trunk/tcl/target/at91eb40a.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/at91eb40a.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -34,7 +34,7 @@
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
#target configuration
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
# speed up memory downloads
Modified: trunk/tcl/target/at91r40008.cfg
===================================================================
--- trunk/tcl/target/at91r40008.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/at91r40008.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -28,7 +28,8 @@
#jtag scan chain
#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi
Modified: trunk/tcl/target/at91sam3uXX.cfg
===================================================================
--- trunk/tcl/target/at91sam3uXX.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/at91sam3uXX.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -29,7 +29,7 @@
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME
# 16K is plenty, the smallest chip has this much
Modified: trunk/tcl/target/at91sam7sx.cfg
===================================================================
--- trunk/tcl/target/at91sam7sx.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/at91sam7sx.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -21,7 +21,7 @@
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi
$_TARGETNAME configure -event reset-init {
Modified: trunk/tcl/target/at91sam9260.cfg
===================================================================
--- trunk/tcl/target/at91sam9260.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/at91sam9260.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -35,7 +35,7 @@
# Target configuration
######################
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
# Internal sram1 memory
Modified: trunk/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg
===================================================================
--- trunk/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -41,7 +41,7 @@
# Target configuration
######################
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
$_TARGETNAME invoke-event halted
Modified: trunk/tcl/target/c100.cfg
===================================================================
--- trunk/tcl/target/c100.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/c100.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -36,7 +36,7 @@
# Per ARM: DDI0211J_arm1136_r1p5_trm.pdf - the ARM 1136 as a 5 bit IR register
jtag newtap $_CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id $_CPUTAPID
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm11 -endian $_ENDIAN -chain-position $_TARGETNAME
# C100's ARAM 64k SRAM
Modified: trunk/tcl/target/cs351x.cfg
===================================================================
--- trunk/tcl/target/cs351x.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/cs351x.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -19,8 +19,9 @@
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
# Create the GDB Target.
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME fa526 -endian $_ENDIAN -chain-position $_TARGETNAME -variant fa526
+
# There is 16K of SRAM on this chip
# FIXME: flash programming is not working by using this work area. So comment this out for now.
#$_TARGETNAME configure -work-area-virt 0x00000000 -work-area-phys 0x00000000 -work-area-size 0x4000 -work-area-backup 1
Modified: trunk/tcl/target/epc9301.cfg
===================================================================
--- trunk/tcl/target/epc9301.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/epc9301.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -23,7 +23,7 @@
jtag_nsrst_delay 100
jtag_ntrst_delay 100
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME -work-area-virt 0 -work-area-phys 0x80014000 -work-area-size 0x1000 -work-area-backup 1
#flash configuration
Modified: trunk/tcl/target/feroceon.cfg
===================================================================
--- trunk/tcl/target/feroceon.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/feroceon.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -21,7 +21,8 @@
}
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME feroceon -endian $_ENDIAN -chain-position $_TARGETNAME
reset_config trst_and_srst
Modified: trunk/tcl/target/imx21.cfg
===================================================================
--- trunk/tcl/target/imx21.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/imx21.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -28,7 +28,7 @@
# Create the GDB Target.
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
arm7_9 dcc_downloads enable
Modified: trunk/tcl/target/imx27.cfg
===================================================================
--- trunk/tcl/target/imx27.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/imx27.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -38,7 +38,7 @@
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
# Create the GDB Target.
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
$_TARGETNAME configure -work-area-virt 0xffff4c00 -work-area-phys 0xffff4c00 -work-area-size 0x8000 -work-area-backup 1
# Internal to the chip, there is 45K of SRAM
Modified: trunk/tcl/target/imx31.cfg
===================================================================
--- trunk/tcl/target/imx31.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/imx31.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -54,7 +54,7 @@
# But this conflicts with Diagram 6-13, "3bits ir and drs"
jtag newtap $_CHIPNAME smda -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id $_SDMATAPID
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm11 -endian $_ENDIAN -chain-position $_TARGETNAME
Modified: trunk/tcl/target/imx35.cfg
===================================================================
--- trunk/tcl/target/imx35.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/imx35.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -43,7 +43,7 @@
jtag newtap $_CHIPNAME smda -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id $_SDMATAPID
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm11 -endian $_ENDIAN -chain-position $_TARGETNAME
proc power_restore {} { puts "Sensed power restore. No action." }
Modified: trunk/tcl/target/is5114.cfg
===================================================================
--- trunk/tcl/target/is5114.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/is5114.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -38,7 +38,7 @@
#arm946e-s and
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm966e
$_TARGETNAME configure -event reset-start { jtag_rclk 16 }
Modified: trunk/tcl/target/ixp42x.cfg
===================================================================
--- trunk/tcl/target/ixp42x.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/ixp42x.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -27,6 +27,6 @@
jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME -variant ixp42x
Modified: trunk/tcl/target/lpc1768.cfg
===================================================================
--- trunk/tcl/target/lpc1768.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/lpc1768.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -27,7 +27,7 @@
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME
# LPC1768 has 32kB of SRAM on its main system bus (so-called Local On-Chip SRAM)
Modified: trunk/tcl/target/lpc2103.cfg
===================================================================
--- trunk/tcl/target/lpc2103.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/lpc2103.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -27,8 +27,7 @@
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
# 8kB of internal SRAM
Modified: trunk/tcl/target/lpc2124.cfg
===================================================================
--- trunk/tcl/target/lpc2124.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/lpc2124.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -32,7 +32,7 @@
#jtag scan chain
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
Modified: trunk/tcl/target/lpc2129.cfg
===================================================================
--- trunk/tcl/target/lpc2129.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/lpc2129.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -32,7 +32,7 @@
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
Modified: trunk/tcl/target/lpc2148.cfg
===================================================================
--- trunk/tcl/target/lpc2148.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/lpc2148.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -32,8 +32,7 @@
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
Modified: trunk/tcl/target/lpc2294.cfg
===================================================================
--- trunk/tcl/target/lpc2294.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/lpc2294.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -26,7 +26,7 @@
#jtag scan chain
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
Modified: trunk/tcl/target/lpc2378.cfg
===================================================================
--- trunk/tcl/target/lpc2378.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/lpc2378.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -27,7 +27,7 @@
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
# LPC2378 has 32kB of SRAM on its main system bus (so-called Local On-Chip SRAM)
Modified: trunk/tcl/target/lpc2478.cfg
===================================================================
--- trunk/tcl/target/lpc2478.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/lpc2478.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -27,7 +27,7 @@
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
# LPC2478 has 64kB of SRAM on its main system bus (so-called Local On-Chip SRAM)
Modified: trunk/tcl/target/mega128.cfg
===================================================================
--- trunk/tcl/target/mega128.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/mega128.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -17,7 +17,7 @@
}
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME avr -endian $_ENDIAN -chain-position $_TARGETNAME
#$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 16384 -work-area-backup 0
Modified: trunk/tcl/target/netx500.cfg
===================================================================
--- trunk/tcl/target/netx500.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/netx500.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -29,6 +29,6 @@
jtag_nsrst_delay 100
jtag_ntrst_delay 100
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
Modified: trunk/tcl/target/pic32mx.cfg
===================================================================
--- trunk/tcl/target/pic32mx.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/pic32mx.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -28,7 +28,7 @@
#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
jtag newtap $_CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id $_CPUTAPID
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME mips_m4k -endian $_ENDIAN -chain-position $_TARGETNAME
$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0xa0000000 -work-area-size 16384 -work-area-backup 0
Modified: trunk/tcl/target/pxa270.cfg
===================================================================
--- trunk/tcl/target/pxa270.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/pxa270.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -30,7 +30,7 @@
# the rest of the needed delays are built into the openocd program
jtag_ntrst_delay 0
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID
target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME -variant pxa27x
Modified: trunk/tcl/target/sam7se512.cfg
===================================================================
--- trunk/tcl/target/sam7se512.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/sam7se512.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -29,7 +29,7 @@
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
# The target
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi
$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0
Modified: trunk/tcl/target/sam7x256.cfg
===================================================================
--- trunk/tcl/target/sam7x256.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/sam7x256.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -21,9 +21,9 @@
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi
-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi
$_TARGETNAME configure -event reset-init {
# disable watchdog
mww 0xfffffd44 0x00008000
Modified: trunk/tcl/target/samsung_s3c2410.cfg
===================================================================
--- trunk/tcl/target/samsung_s3c2410.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/samsung_s3c2410.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -25,7 +25,7 @@
#jtag scan chain
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm920t
$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x30800000 -work-area-size 0x20000 -work-area-backup 0
Modified: trunk/tcl/target/samsung_s3c2440.cfg
===================================================================
--- trunk/tcl/target/samsung_s3c2440.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/samsung_s3c2440.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -26,8 +26,9 @@
#jtag scan chain
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_CPUTAPID
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm920t
+
$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x200000 -work-area-size 0x4000 -work-area-backup 1
#reset configuration
Modified: trunk/tcl/target/samsung_s3c2450.cfg
===================================================================
--- trunk/tcl/target/samsung_s3c2450.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/samsung_s3c2450.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -36,7 +36,7 @@
#jtag scan chain
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0xE -irmask 0x0f -expected-id $_CPUTAPID
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
# FIX!!!!! should this really use srst_pulls_trst?
@@ -46,4 +46,4 @@
# However, without "srst_pulls_trst", then "reset halt" produces weird
# errors:
# WARNING: unknown debug reason: 0x0
-reset_config trst_and_srst
\ No newline at end of file
+reset_config trst_and_srst
Modified: trunk/tcl/target/samsung_s3c4510.cfg
===================================================================
--- trunk/tcl/target/samsung_s3c4510.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/samsung_s3c4510.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -20,6 +20,6 @@
}
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME
Modified: trunk/tcl/target/samsung_s3c6410.cfg
===================================================================
--- trunk/tcl/target/samsung_s3c6410.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/samsung_s3c6410.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -39,7 +39,7 @@
jtag newtap $_CHIPNAME unknown -irlen 4 -ircapture 0x1 -irmask 0xe -expected-id $_BSTAPID
jtag newtap $_CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id $_CPUTAPID
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm11 -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm1176
jtag_nsrst_delay 500
Modified: trunk/tcl/target/sharp_lh79532.cfg
===================================================================
--- trunk/tcl/target/sharp_lh79532.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/sharp_lh79532.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -20,7 +20,7 @@
}
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME
Modified: trunk/tcl/target/smp8634.cfg
===================================================================
--- trunk/tcl/target/smp8634.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/smp8634.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -28,5 +28,5 @@
# format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
jtag newtap $_CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME mips_m4k -endian $_ENDIAN -variant
Modified: trunk/tcl/target/stm32.cfg
===================================================================
--- trunk/tcl/target/stm32.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/stm32.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -57,7 +57,7 @@
}
jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BSTAPID1 -expected-id $_BSTAPID2 -expected-id $_BSTAPID3 -expected-id $_BSTAPID4 -expected-id $_BSTAPID5
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME
$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
Modified: trunk/tcl/target/str710.cfg
===================================================================
--- trunk/tcl/target/str710.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/str710.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -26,8 +26,9 @@
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_CPUTAPID
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi
+
$_TARGETNAME configure -event reset-start { jtag_khz 10 }
$_TARGETNAME configure -event reset-init { jtag_khz 6000 }
$_TARGETNAME configure -event gdb-flash-erase-start {
Modified: trunk/tcl/target/str730.cfg
===================================================================
--- trunk/tcl/target/str730.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/str730.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -31,8 +31,9 @@
jtag_nsrst_delay 500
jtag_ntrst_delay 500
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm7tdmi -endian little -chain-position 0 -variant arm7tdmi
+
$_TARGETNAME configure -event reset-start { jtag_khz 10 }
$_TARGETNAME configure -event reset-init { jtag_khz 3000 }
$_TARGETNAME configure -event gdb-flash-erase-start {
Modified: trunk/tcl/target/str750.cfg
===================================================================
--- trunk/tcl/target/str750.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/str750.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -33,7 +33,7 @@
jtag_nsrst_delay 500
jtag_ntrst_delay 500
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm7tdmi -endian little -chain-position 0 -variant arm7tdmi
$_TARGETNAME configure -event reset-start { jtag_khz 10 }
Modified: trunk/tcl/target/str912.cfg
===================================================================
--- trunk/tcl/target/str912.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/str912.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -43,7 +43,7 @@
}
jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BSTAPID
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm966e
$_TARGETNAME configure -event reset-start { jtag_rclk 16 }
Modified: trunk/tcl/target/test_reset_syntax_error.cfg
===================================================================
--- trunk/tcl/target/test_reset_syntax_error.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/test_reset_syntax_error.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -8,7 +8,7 @@
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf
#target configuration
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
$_TARGETNAME configure -event reset-init {
Modified: trunk/tcl/target/xba_revA3.cfg
===================================================================
--- trunk/tcl/target/xba_revA3.cfg 2009-09-04 05:14:32 UTC (rev 2664)
+++ trunk/tcl/target/xba_revA3.cfg 2009-09-04 05:17:03 UTC (rev 2665)
@@ -28,8 +28,9 @@
#jtag scan chain
jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME -variant ixp42x
+
$_TARGETNAME configure -event reset-init {
#############################################################################
# setup expansion bus CS, disable external wdt
|
