Menu
▾
▴
[Openocd-svn] r2331 - trunk/src/flash
|
From: <du...@ma...> - 2009-06-21 05:20:04
|
Author: duane
Date: 2009-06-21 05:20:00 +0200 (Sun, 21 Jun 2009)
New Revision: 2331
Modified:
trunk/src/flash/cfi.c
Log:
C99 printf() -Werror fixes
Modified: trunk/src/flash/cfi.c
===================================================================
--- trunk/src/flash/cfi.c 2009-06-21 03:19:55 UTC (rev 2330)
+++ trunk/src/flash/cfi.c 2009-06-21 03:20:00 UTC (rev 2331)
@@ -378,7 +378,10 @@
pri_ext->suspend_cmd_support = cfi_query_u8(bank, 0, cfi_info->pri_addr + 9);
pri_ext->blk_status_reg_mask = cfi_query_u16(bank, 0, cfi_info->pri_addr + 0xa);
- LOG_DEBUG("feature_support: 0x%x, suspend_cmd_support: 0x%x, blk_status_reg_mask: 0x%x", pri_ext->feature_support, pri_ext->suspend_cmd_support, pri_ext->blk_status_reg_mask);
+ LOG_DEBUG("feature_support: 0x%" PRIx32 ", suspend_cmd_support: 0x%x, blk_status_reg_mask: 0x%x",
+ pri_ext->feature_support,
+ pri_ext->suspend_cmd_support,
+ pri_ext->blk_status_reg_mask);
pri_ext->vcc_optimal = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0xc);
pri_ext->vpp_optimal = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0xd);
@@ -597,7 +600,7 @@
buf += printed;
buf_size -= printed;
- printed = snprintf(buf, buf_size, "feature_support: 0x%x, suspend_cmd_support: 0x%x, blk_status_reg_mask: 0x%x\n", pri_ext->feature_support, pri_ext->suspend_cmd_support, pri_ext->blk_status_reg_mask);
+ printed = snprintf(buf, buf_size, "feature_support: 0x%" PRIx32 ", suspend_cmd_support: 0x%x, blk_status_reg_mask: 0x%x\n", pri_ext->feature_support, pri_ext->suspend_cmd_support, pri_ext->blk_status_reg_mask);
buf += printed;
buf_size -= printed;
@@ -709,7 +712,7 @@
return retval;
}
- LOG_ERROR("couldn't erase block %i of flash bank at base 0x%x", i, bank->base);
+ LOG_ERROR("couldn't erase block %i of flash bank at base 0x%" PRIx32 , i, bank->base);
return ERROR_FLASH_OPERATION_FAILED;
}
}
@@ -776,7 +779,7 @@
return retval;
}
- LOG_ERROR("couldn't erase block %i of flash bank at base 0x%x", i, bank->base);
+ LOG_ERROR("couldn't erase block %i of flash bank at base 0x%" PRIx32, i, bank->base);
return ERROR_FLASH_OPERATION_FAILED;
}
}
@@ -841,7 +844,7 @@
for (i = first; i <= last; i++)
{
cfi_command(bank, 0x60, command);
- LOG_DEBUG("address: 0x%4.4x, command: 0x%4.4x", flash_address(bank, i, 0x0), target_buffer_get_u32(target, command));
+ LOG_DEBUG("address: 0x%4.4" PRIx32 ", command: 0x%4.4" PRIx32, flash_address(bank, i, 0x0), target_buffer_get_u32(target, command));
if((retval = target_write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
@@ -849,7 +852,7 @@
if (set)
{
cfi_command(bank, 0x01, command);
- LOG_DEBUG("address: 0x%4.4x, command: 0x%4.4x", flash_address(bank, i, 0x0), target_buffer_get_u32(target, command));
+ LOG_DEBUG("address: 0x%4.4" PRIx32 ", command: 0x%4.4" PRIx32 , flash_address(bank, i, 0x0), target_buffer_get_u32(target, command));
if((retval = target_write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
@@ -859,7 +862,7 @@
else
{
cfi_command(bank, 0xd0, command);
- LOG_DEBUG("address: 0x%4.4x, command: 0x%4.4x", flash_address(bank, i, 0x0), target_buffer_get_u32(target, command));
+ LOG_DEBUG("address: 0x%4.4" PRIx32 ", command: 0x%4.4" PRIx32, flash_address(bank, i, 0x0), target_buffer_get_u32(target, command));
if((retval = target_write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command)) != ERROR_OK)
{
return retval;
@@ -1203,7 +1206,7 @@
busy_pattern_val = cfi_command_val(bank, 0x80);
error_pattern_val = cfi_command_val(bank, 0x7e);
- LOG_INFO("Using target buffer at 0x%08x and of size 0x%04x", source->address, buffer_size );
+ LOG_INFO("Using target buffer at 0x%08" PRIx32 " and of size 0x%04" PRIx32, source->address, buffer_size );
/* Programming main loop */
while (count > 0)
@@ -1224,7 +1227,7 @@
buf_set_u32(reg_params[5].value, 0, 32, busy_pattern_val);
buf_set_u32(reg_params[6].value, 0, 32, error_pattern_val);
- LOG_INFO("Write 0x%04x bytes to flash at 0x%08x", thisrun_count, address );
+ LOG_INFO("Write 0x%04" PRIx32 " bytes to flash at 0x%08" PRIx32 , thisrun_count, address );
/* Execute algorithm, assume breakpoint for last instruction */
retval = target_run_algorithm(target, 0, NULL, 7, reg_params,
@@ -1519,7 +1522,7 @@
if ((retval != ERROR_OK) || (retvaltemp != ERROR_OK) || status != 0x80)
{
- LOG_DEBUG("status: 0x%x", status);
+ LOG_DEBUG("status: 0x%" PRIx32 , status);
exit_code = ERROR_FLASH_OPERATION_FAILED;
break;
}
@@ -1572,7 +1575,7 @@
return retval;
}
- LOG_ERROR("couldn't write word at base 0x%x, address %x", bank->base, address);
+ LOG_ERROR("couldn't write word at base 0x%" PRIx32 ", address %" PRIx32 , bank->base, address);
return ERROR_FLASH_OPERATION_FAILED;
}
@@ -1594,7 +1597,8 @@
/* Check for valid range */
if (address & buffermask)
{
- LOG_ERROR("Write address at base 0x%x, address %x not aligned to 2^%d boundary", bank->base, address, cfi_info->max_buf_write_size);
+ LOG_ERROR("Write address at base 0x%" PRIx32 ", address %" PRIx32 " not aligned to 2^%d boundary",
+ bank->base, address, cfi_info->max_buf_write_size);
return ERROR_FLASH_OPERATION_FAILED;
}
switch(bank->chip_width)
@@ -1613,7 +1617,7 @@
/* Check for valid size */
if (wordcount > bufferwsize)
{
- LOG_ERROR("Number of data words %d exceeds available buffersize %d", wordcount, buffersize);
+ LOG_ERROR("Number of data words %" PRId32 " exceeds available buffersize %" PRId32 , wordcount, buffersize);
return ERROR_FLASH_OPERATION_FAILED;
}
@@ -1634,7 +1638,7 @@
return retval;
}
- LOG_ERROR("couldn't start buffer write operation at base 0x%x, address %x", bank->base, address);
+ LOG_ERROR("couldn't start buffer write operation at base 0x%" PRIx32 ", address %" PRIx32 , bank->base, address);
return ERROR_FLASH_OPERATION_FAILED;
}
@@ -1664,7 +1668,7 @@
return retval;
}
- LOG_ERROR("Buffer write at base 0x%x, address %x failed.", bank->base, address);
+ LOG_ERROR("Buffer write at base 0x%" PRIx32 ", address %" PRIx32 " failed.", bank->base, address);
return ERROR_FLASH_OPERATION_FAILED;
}
@@ -1710,7 +1714,7 @@
return retval;
}
- LOG_ERROR("couldn't write word at base 0x%x, address %x", bank->base, address);
+ LOG_ERROR("couldn't write word at base 0x%" PRIx32 ", address %" PRIx32 , bank->base, address);
return ERROR_FLASH_OPERATION_FAILED;
}
@@ -1733,7 +1737,7 @@
/* Check for valid range */
if (address & buffermask)
{
- LOG_ERROR("Write address at base 0x%x, address %x not aligned to 2^%d boundary", bank->base, address, cfi_info->max_buf_write_size);
+ LOG_ERROR("Write address at base 0x%" PRIx32 ", address %" PRIx32 " not aligned to 2^%d boundary", bank->base, address, cfi_info->max_buf_write_size);
return ERROR_FLASH_OPERATION_FAILED;
}
switch(bank->chip_width)
@@ -1751,7 +1755,7 @@
/* Check for valid size */
if (wordcount > bufferwsize)
{
- LOG_ERROR("Number of data words %d exceeds available buffersize %d", wordcount, buffersize);
+ LOG_ERROR("Number of data words %" PRId32 " exceeds available buffersize %" PRId32, wordcount, buffersize);
return ERROR_FLASH_OPERATION_FAILED;
}
@@ -1802,7 +1806,7 @@
return retval;
}
- LOG_ERROR("couldn't write block at base 0x%x, address %x, size %x", bank->base, address, bufferwsize);
+ LOG_ERROR("couldn't write block at base 0x%" PRIx32 ", address %" PRIx32 ", size %" PRIx32 , bank->base, address, bufferwsize);
return ERROR_FLASH_OPERATION_FAILED;
}
@@ -1972,7 +1976,7 @@
int fallback;
if ((write_p & 0xff) == 0)
{
- LOG_INFO("Programming at %08x, count %08x bytes remaining", write_p, count);
+ LOG_INFO("Programming at %08" PRIx32 ", count %08" PRIx32 " bytes remaining", write_p, count);
}
fallback = 1;
if ((bufferwsize > 0) && (count >= buffersize) && !(write_p & buffermask))
@@ -2025,7 +2029,7 @@
/* handle unaligned tail bytes */
if (count > 0)
{
- LOG_INFO("Fixup %d unaligned tail bytes", count );
+ LOG_INFO("Fixup %" PRId32 " unaligned tail bytes", count );
copy_p = write_p;
for (i = 0; i < bank->bus_width; i++)
@@ -2267,7 +2271,7 @@
cfi_info->max_buf_write_size = cfi_query_u16(bank, 0, 0x2a);
cfi_info->num_erase_regions = cfi_query_u8(bank, 0, 0x2c);
- LOG_DEBUG("size: 0x%x, interface desc: %i, max buffer write size: %x", cfi_info->dev_size, cfi_info->interface_desc, (1 << cfi_info->max_buf_write_size));
+ LOG_DEBUG("size: 0x%" PRIx32 ", interface desc: %i, max buffer write size: %x", cfi_info->dev_size, cfi_info->interface_desc, (1 << cfi_info->max_buf_write_size));
if (cfi_info->num_erase_regions)
{
@@ -2275,7 +2279,10 @@
for (i = 0; i < cfi_info->num_erase_regions; i++)
{
cfi_info->erase_region_info[i] = cfi_query_u32(bank, 0, 0x2d + (4 * i));
- LOG_DEBUG("erase region[%i]: %i blocks of size 0x%x", i, (cfi_info->erase_region_info[i] & 0xffff) + 1, (cfi_info->erase_region_info[i] >> 16) * 256);
+ LOG_DEBUG("erase region[%i]: %" PRIu32 " blocks of size 0x%" PRIx32 "",
+ i,
+ (cfi_info->erase_region_info[i] & 0xffff) + 1,
+ (cfi_info->erase_region_info[i] >> 16) * 256);
}
}
else
@@ -2337,7 +2344,7 @@
if ((cfi_info->dev_size * bank->bus_width / bank->chip_width) != bank->size)
{
- LOG_WARNING("configuration specifies 0x%x size, but a 0x%x size flash was found", bank->size, cfi_info->dev_size);
+ LOG_WARNING("configuration specifies 0x%" PRIx32 " size, but a 0x%" PRIx32 " size flash was found", bank->size, cfi_info->dev_size);
}
if (cfi_info->num_erase_regions == 0)
@@ -2378,7 +2385,7 @@
}
if (offset != cfi_info->dev_size)
{
- LOG_WARNING("CFI size is 0x%x, but total sector size is 0x%x", cfi_info->dev_size, offset);
+ LOG_WARNING("CFI size is 0x%" PRIx32 ", but total sector size is 0x%" PRIx32 "", cfi_info->dev_size, offset);
}
}
@@ -2553,7 +2560,7 @@
buf += printed;
buf_size -= printed;
- printed = snprintf(buf, buf_size, "size: 0x%x, interface desc: %i, max buffer write size: %x\n",
+ printed = snprintf(buf, buf_size, "size: 0x%" PRIx32 ", interface desc: %i, max buffer write size: %x\n",
cfi_info->dev_size,
cfi_info->interface_desc,
1 << cfi_info->max_buf_write_size);
|
