[Openocd-svn] r1983 - trunk/src/jtag

[<zw...@ma...>]

Author: zwelch
Date: 2009-06-02 00:54:42 +0200 (Tue, 02 Jun 2009)
New Revision: 1983

Modified:
   trunk/src/jtag/jtag.c
   trunk/src/jtag/jtag.h
   trunk/src/jtag/zy1000.c
Log:
Encapsulate JTAG minidriver functions, plan for new header file.

Modified: trunk/src/jtag/jtag.c
===================================================================
--- trunk/src/jtag/jtag.c	2009-06-01 21:54:35 UTC (rev 1982)
+++ trunk/src/jtag/jtag.c	2009-06-01 22:54:42 UTC (rev 1983)
@@ -28,6 +28,7 @@
 #include "config.h"
 #endif
 
+#define INCLUDE_JTAG_MINIDRIVER_H
 #include "jtag.h"
 
 #ifdef HAVE_STRINGS_H

Modified: trunk/src/jtag/jtag.h
===================================================================
--- trunk/src/jtag/jtag.h	2009-06-01 21:54:35 UTC (rev 1982)
+++ trunk/src/jtag/jtag.h	2009-06-01 22:54:42 UTC (rev 1983)
@@ -557,7 +557,6 @@
 extern void jtag_add_ir_scan(int num_fields, scan_field_t* fields, tap_state_t endstate);
 /* same as jtag_add_ir_scan except no verify is performed */
 extern void jtag_add_ir_scan_noverify(int num_fields, const scan_field_t *fields, tap_state_t state);
-extern int  interface_jtag_add_ir_scan(int num_fields, const scan_field_t* fields, tap_state_t endstate);
 extern void jtag_add_dr_scan(int num_fields, const scan_field_t* fields, tap_state_t endstate);
 
 /* set in_value to point to 32 bits of memory to scan into. This function
@@ -582,11 +581,8 @@
 
 /* This version of jtag_add_dr_scan() uses the check_value/mask fields */
 extern void jtag_add_dr_scan_check(int num_fields, scan_field_t* fields, tap_state_t endstate);
-extern int  interface_jtag_add_dr_scan(int num_fields, const scan_field_t* fields, tap_state_t endstate);
 extern void jtag_add_plain_ir_scan(int num_fields, const scan_field_t* fields, tap_state_t endstate);
-extern int  interface_jtag_add_plain_ir_scan(int num_fields, const scan_field_t* fields, tap_state_t endstate);
 extern void jtag_add_plain_dr_scan(int num_fields, const scan_field_t* fields, tap_state_t endstate);
-extern int  interface_jtag_add_plain_dr_scan(int num_fields, const scan_field_t* fields, tap_state_t endstate);
 
 
 /* Simplest/typical callback - do some conversion on the data clocked in.
@@ -657,7 +653,6 @@
  * of start state.
  */
 extern void jtag_add_tlr(void);
-extern int  interface_jtag_add_tlr(void);
 
 /* Application code *must* assume that interfaces will
  * implement transitions between states with different
@@ -701,7 +696,6 @@
  * application.
  */
 extern void jtag_add_pathmove(int num_states, const tap_state_t* path);
-extern int  interface_jtag_add_pathmove(int num_states, const tap_state_t* path);
 
 /* go to TAP_IDLE, if we're not already there and cycle
  * precisely num_cycles in the TAP_IDLE after which move
@@ -711,7 +705,6 @@
  * to endstate via TAP_IDLE
  */
 extern void jtag_add_runtest(int num_cycles, tap_state_t endstate);
-extern int  interface_jtag_add_runtest(int num_cycles, tap_state_t endstate);
 
 /* A reset of the TAP state machine can be requested.
  *
@@ -737,18 +730,8 @@
  */
 extern void jtag_add_reset(int req_tlr_or_trst, int srst);
 
-/* this drives the actual srst and trst pins. srst will always be 0
- * if jtag_reset_config & RESET_SRST_PULLS_TRST != 0 and ditto for
- * trst.
- *
- * the higher level jtag_add_reset will invoke jtag_add_tlr() if
- * approperiate
- */
-extern int  interface_jtag_add_reset(int trst, int srst);
 extern void jtag_add_end_state(tap_state_t endstate);
-extern int  interface_jtag_add_end_state(tap_state_t endstate);
 extern void jtag_add_sleep(u32 us);
-extern int  interface_jtag_add_sleep(u32 us);
 
 
 /**
@@ -757,7 +740,6 @@
  * stable, then queues up clock_count clocks for transmission.
  */
 void jtag_add_clocks(int num_cycles);
-int  interface_jtag_add_clocks(int num_cycles);
 
 
 /*
@@ -806,7 +788,6 @@
 
 
 /* can be implemented by hw+sw */
-extern int            interface_jtag_execute_queue(void);
 extern int            jtag_power_dropout(int* dropout);
 extern int            jtag_srst_asserted(int* srst_asserted);
 
@@ -843,7 +824,42 @@
 #define ERROR_JTAG_NOT_STABLE_STATE  (-105)
 #define ERROR_JTAG_DEVICE_ERROR      (-107)
 
+#ifdef INCLUDE_JTAG_MINIDRIVER_H
 
+extern int interface_jtag_add_ir_scan(
+		int num_fields, const scan_field_t* fields,
+		tap_state_t endstate);
+extern int interface_jtag_add_plain_ir_scan(
+		int num_fields, const scan_field_t* fields,
+		tap_state_t endstate);
+
+extern int interface_jtag_add_dr_scan(
+		int num_fields, const scan_field_t* fields,
+		tap_state_t endstate);
+extern int interface_jtag_add_plain_dr_scan(
+		int num_fields, const scan_field_t* fields,
+		tap_state_t endstate);
+
+extern int interface_jtag_add_tlr(void);
+extern int interface_jtag_add_pathmove(int num_states, const tap_state_t* path);
+extern int interface_jtag_add_runtest(int num_cycles, tap_state_t endstate);
+
+/**
+ * This drives the actual srst and trst pins. srst will always be 0
+ * if jtag_reset_config & RESET_SRST_PULLS_TRST != 0 and ditto for
+ * trst.
+ *
+ * the higher level jtag_add_reset will invoke jtag_add_tlr() if
+ * approperiate
+ */
+extern int interface_jtag_add_reset(int trst, int srst);
+extern int interface_jtag_add_end_state(tap_state_t endstate);
+extern int interface_jtag_add_sleep(u32 us);
+extern int interface_jtag_add_clocks(int num_cycles);
+extern int interface_jtag_execute_queue(void);
+
+#endif // INCLUDE_JTAG_MINIDRIVER_H
+
 /* this allows JTAG devices to implement the entire jtag_xxx() layer in hw/sw */
 #ifdef HAVE_JTAG_MINIDRIVER_H
 /* Here a #define MINIDRIVER() and an inline version of hw fifo interface_jtag_add_dr_out can be defined */

Modified: trunk/src/jtag/zy1000.c
===================================================================
--- trunk/src/jtag/zy1000.c	2009-06-01 21:54:35 UTC (rev 1982)
+++ trunk/src/jtag/zy1000.c	2009-06-01 22:54:42 UTC (rev 1983)
@@ -20,6 +20,7 @@
 #include "config.h"
 #endif
 
+#define INCLUDE_JTAG_MINIDRIVER_H
 #include "embeddedice.h"
 #include "bitbang.h"