[Openocd-svn] r1890 - trunk/src/target/target

[<mi...@ma...>]

Author: mifi
Date: 2009-05-23 20:26:06 +0200 (Sat, 23 May 2009)
New Revision: 1890

Modified:
   trunk/src/target/target/sam7se512.cfg
   trunk/src/target/target/sam7x256.cfg
Log:
Change the setting for the sam7se512 and sam7x256 
flash driver because of the new at91sam7 version.

Modified: trunk/src/target/target/sam7se512.cfg
===================================================================
--- trunk/src/target/target/sam7se512.cfg	2009-05-23 03:42:13 UTC (rev 1889)
+++ trunk/src/target/target/sam7se512.cfg	2009-05-23 18:26:06 UTC (rev 1890)
@@ -34,5 +34,6 @@
 
 $_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0
 
-flash bank at91sam7 0 0 0 0 0
+#flash bank <driver> <base_addr> <size> <chip_width> <bus_width> <target_number> [<target_name> <banks> <sectors_per_bank> <pages_per_sector> <page_size> <num_nvmbits> <ext_freq_khz>]
+flash bank at91sam7 0 0 0 0 0 0 0 0 0 0 0 0 18432
 

Modified: trunk/src/target/target/sam7x256.cfg
===================================================================
--- trunk/src/target/target/sam7x256.cfg	2009-05-23 03:42:13 UTC (rev 1889)
+++ trunk/src/target/target/sam7x256.cfg	2009-05-23 18:26:06 UTC (rev 1890)
@@ -45,8 +45,8 @@
 
 $_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0
 
-#flash bank <driver> <base> <size> <chip_width> <bus_width>
-flash bank at91sam7 0 0 0 0 0
+#flash bank <driver> <base_addr> <size> <chip_width> <bus_width> <target_number> [<target_name> <banks> <sectors_per_bank> <pages_per_sector> <page_size> <num_nvmbits> <ext_freq_khz>]
+flash bank at91sam7 0 0 0 0 0 0 0 0 0 0 0 0 18432
 
 # For more information about the configuration files, take a look at:
 # openocd.texi