[Openocd-svn] r1836 - trunk/src/target/target

[oharboe at B. <oh...@ma...>]

Author: oharboe
Date: 2009-05-19 13:53:05 +0200 (Tue, 19 May 2009)
New Revision: 1836

Modified:
   trunk/src/target/target/pxa270.cfg
Log:
Wookey <wo...@wo...> update syntax

Modified: trunk/src/target/target/pxa270.cfg
===================================================================
--- trunk/src/target/target/pxa270.cfg	2009-05-19 10:04:41 UTC (rev 1835)
+++ trunk/src/target/target/pxa270.cfg	2009-05-19 11:53:05 UTC (rev 1836)
@@ -12,6 +12,9 @@
    set  _ENDIAN little
 }
 
+#IDs for pxa270. Choose one. Are there others?#
+#set CPUTAPID 0x79265013
+#set CPUTAPID 0x49265013
 if { [info exists CPUTAPID ] } {
    set _CPUTAPID $CPUTAPID
 } else {
@@ -26,11 +29,7 @@
 # set the jtag_ntrst_delay to the delay introduced by a reset circuit
 # the rest of the needed delays are built into the openocd program
 jtag_ntrst_delay 0
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config trst_and_srst separate
-#jtag scan chain
 
-
 set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
 jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID
 
@@ -38,7 +37,3 @@
 # maps to PXA internal RAM. If you are using a PXA255
 # you must initialize SDRAM or leave this option off
 $_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x5c000000 -work-area-size 0x10000 -work-area-backup 0
-
-#flash bank <driver> <base> <size> <chip_width> <bus_width>
-# works for P30 flash
-flash bank cfi 0x00000000 0x1000000 2 4 0