Menu
▾
▴
[Openocd-svn] r1768 - in trunk/src: flash target/board
|
From: <oh...@ma...> - 2009-05-12 19:29:27
|
Author: oharboe
Date: 2009-05-12 19:29:16 +0200 (Tue, 12 May 2009)
New Revision: 1768
Added:
trunk/src/flash/nand_ecc_kw.c
Modified:
trunk/src/flash/Makefile.am
trunk/src/flash/nand.c
trunk/src/flash/nand.h
trunk/src/target/board/sheevaplug.cfg
Log:
4-bit ECC support for Marvell Kirkwood SOC
Modified: trunk/src/flash/Makefile.am
===================================================================
--- trunk/src/flash/Makefile.am 2009-05-12 17:14:10 UTC (rev 1767)
+++ trunk/src/flash/Makefile.am 2009-05-12 17:29:16 UTC (rev 1768)
@@ -7,7 +7,7 @@
noinst_LTLIBRARIES = libflash.la
libflash_la_SOURCES = \
flash.c lpc2000.c cfi.c non_cfi.c at91sam7.c \
- str7x.c str9x.c aduc702x.c nand.c nand_ecc.c \
+ str7x.c str9x.c aduc702x.c nand.c nand_ecc.c nand_ecc_kw.c \
lpc3180_nand_controller.c stellaris.c str9xpec.c stm32x.c tms470.c \
ecos.c orion_nand.c s3c24xx_nand.c s3c2410_nand.c s3c2412_nand.c \
s3c2440_nand.c s3c2443_nand.c lpc288x.c ocl.c mflash.c pic32mx.c avrf.c
Modified: trunk/src/flash/nand.c
===================================================================
--- trunk/src/flash/nand.c 2009-05-12 17:14:10 UTC (rev 1767)
+++ trunk/src/flash/nand.c 2009-05-12 17:29:16 UTC (rev 1768)
@@ -1332,6 +1332,8 @@
oob_format |= NAND_OOB_RAW | NAND_OOB_ONLY;
else if (!strcmp(args[i], "oob_softecc"))
oob_format |= NAND_OOB_SW_ECC;
+ else if (!strcmp(args[i], "oob_softecc_kw"))
+ oob_format |= NAND_OOB_SW_ECC_KW;
else
{
command_print(cmd_ctx, "unknown option: %s", args[i]);
@@ -1355,7 +1357,7 @@
page = malloc(p->page_size);
}
- if (oob_format & (NAND_OOB_RAW | NAND_OOB_SW_ECC))
+ if (oob_format & (NAND_OOB_RAW | NAND_OOB_SW_ECC | NAND_OOB_SW_ECC_KW))
{
if (p->page_size == 512) {
oob_size = 16;
@@ -1401,6 +1403,21 @@
oob[eccpos[j++]] = ecc[1];
oob[eccpos[j++]] = ecc[2];
}
+ } else if (oob_format & NAND_OOB_SW_ECC_KW)
+ {
+ /*
+ * In this case eccpos is not used as
+ * the ECC data is always stored contigously
+ * at the end of the OOB area. It consists
+ * of 10 bytes per 512-byte data block.
+ */
+ u32 i;
+ u8 *ecc = oob + oob_size - page_size/512 * 10;
+ memset(oob, 0xff, oob_size);
+ for (i = 0; i < page_size; i += 512) {
+ nand_calculate_ecc_kw(p, page+i, ecc);
+ ecc += 10;
+ }
}
else if (NULL != oob)
{
Modified: trunk/src/flash/nand.h
===================================================================
--- trunk/src/flash/nand.h 2009-05-12 17:14:10 UTC (rev 1767)
+++ trunk/src/flash/nand.h 2009-05-12 17:29:16 UTC (rev 1768)
@@ -200,6 +200,7 @@
NAND_OOB_ONLY = 0x2, /* only OOB data */
NAND_OOB_SW_ECC = 0x10, /* when writing, use SW ECC (as opposed to no ECC) */
NAND_OOB_HW_ECC = 0x20, /* when writing, use HW ECC (as opposed to no ECC) */
+ NAND_OOB_SW_ECC_KW = 0x40, /* when writing, use Marvell's Kirkwood bootrom format */
NAND_OOB_JFFS2 = 0x100, /* when writing, use JFFS2 OOB layout */
NAND_OOB_YAFFS2 = 0x100,/* when writing, use YAFFS2 OOB layout */
};
@@ -210,6 +211,7 @@
extern int nand_write_page_raw(struct nand_device_s *device, u32 page, u8 *data, u32 data_size, u8 *oob, u32 oob_size);
extern int nand_read_status(struct nand_device_s *device, u8 *status);
extern int nand_calculate_ecc(struct nand_device_s *device, const u8 *dat, u8 *ecc_code);
+extern int nand_calculate_ecc_kw(struct nand_device_s *device, const u8 *dat, u8 *ecc_code);
extern int nand_register_commands(struct command_context_s *cmd_ctx);
extern int nand_init(struct command_context_s *cmd_ctx);
Added: trunk/src/flash/nand_ecc_kw.c
===================================================================
--- trunk/src/flash/nand_ecc_kw.c 2009-05-12 17:14:10 UTC (rev 1767)
+++ trunk/src/flash/nand_ecc_kw.c 2009-05-12 17:29:16 UTC (rev 1768)
@@ -0,0 +1,174 @@
+/*
+ * Reed-Solomon ECC handling for the Marvell Kirkwood SOC
+ * Copyright (C) 2009 Marvell Semiconductor, Inc.
+ *
+ * Authors: Lennert Buytenhek <bu...@wa...>
+ * Nicolas Pitre <ni...@ca...>
+ *
+ * This file is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 or (at your option) any
+ * later version.
+ *
+ * This file is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include <sys/types.h>
+#include "nand.h"
+
+
+/*****************************************************************************
+ * Arithmetic in GF(2^10) ("F") modulo x^10 + x^3 + 1.
+ *
+ * For multiplication, a discrete log/exponent table is used, with
+ * primitive element x (F is a primitive field, so x is primitive).
+ */
+#define MODPOLY 0x409 /* x^10 + x^3 + 1 in binary */
+
+/*
+ * Maps an integer a [0..1022] to a polynomial b = gf_exp[a] in
+ * GF(2^10) mod x^10 + x^3 + 1 such that b = x ^ a. There's two
+ * identical copies of this array back-to-back so that we can save
+ * the mod 1023 operation when doing a GF multiplication.
+ */
+static uint16_t gf_exp[1023 + 1023];
+
+/*
+ * Maps a polynomial b in GF(2^10) mod x^10 + x^3 + 1 to an index
+ * a = gf_log[b] in [0..1022] such that b = x ^ a.
+ */
+static uint16_t gf_log[1024];
+
+static void gf_build_log_exp_table(void)
+{
+ int i;
+ int p_i;
+
+ /*
+ * p_i = x ^ i
+ *
+ * Initialise to 1 for i = 0.
+ */
+ p_i = 1;
+
+ for (i = 0; i < 1023; i++) {
+ gf_exp[i] = p_i;
+ gf_exp[i + 1023] = p_i;
+ gf_log[p_i] = i;
+
+ /*
+ * p_i = p_i * x
+ */
+ p_i <<= 1;
+ if (p_i & (1 << 10))
+ p_i ^= MODPOLY;
+ }
+}
+
+
+/*****************************************************************************
+ * Reed-Solomon code
+ *
+ * This implements a (1023,1015) Reed-Solomon ECC code over GF(2^10)
+ * mod x^10 + x^3 + 1, shortened to (520,512). The ECC data consists
+ * of 8 10-bit symbols, or 10 8-bit bytes.
+ *
+ * Given 512 bytes of data, computes 10 bytes of ECC.
+ *
+ * This is done by converting the 512 bytes to 512 10-bit symbols
+ * (elements of F), interpreting those symbols as a polynomial in F[X]
+ * by taking symbol 0 as the coefficient of X^8 and symbol 511 as the
+ * coefficient of X^519, and calculating the residue of that polynomial
+ * divided by the generator polynomial, which gives us the 8 ECC symbols
+ * as the remainder. Finally, we convert the 8 10-bit ECC symbols to 10
+ * 8-bit bytes.
+ *
+ * The generator polynomial is hardcoded, as that is faster, but it
+ * can be computed by taking the primitive element a = x (in F), and
+ * constructing a polynomial in F[X] with roots a, a^2, a^3, ..., a^8
+ * by multiplying the minimal polynomials for those roots (which are
+ * just 'x - a^i' for each i).
+ *
+ * Note: due to unfortunate circumstances, the bootrom in the Kirkwood SOC
+ * expects the ECC to be computed backward, i.e. from the last byte down
+ * to the first one.
+ */
+int nand_calculate_ecc_kw(struct nand_device_s *device, const u8 *data, u8 *ecc)
+{
+ unsigned int r7, r6, r5, r4, r3, r2, r1, r0;
+ int i;
+ static int tables_initialized = 0;
+
+ if (!tables_initialized) {
+ gf_build_log_exp_table();
+ tables_initialized = 1;
+ }
+
+ /*
+ * Load bytes 504..511 of the data into r.
+ */
+ r0 = data[504];
+ r1 = data[505];
+ r2 = data[506];
+ r3 = data[507];
+ r4 = data[508];
+ r5 = data[509];
+ r6 = data[510];
+ r7 = data[511];
+
+
+ /*
+ * Shift bytes 503..0 (in that order) into r0, followed
+ * by eight zero bytes, while reducing the polynomial by the
+ * generator polynomial in every step.
+ */
+ for (i = 503; i >= -8; i--) {
+ unsigned int d;
+
+ d = 0;
+ if (i >= 0)
+ d = data[i];
+
+ if (r7) {
+ u16 *t = gf_exp + gf_log[r7];
+
+ r7 = r6 ^ t[0x21c];
+ r6 = r5 ^ t[0x181];
+ r5 = r4 ^ t[0x18e];
+ r4 = r3 ^ t[0x25f];
+ r3 = r2 ^ t[0x197];
+ r2 = r1 ^ t[0x193];
+ r1 = r0 ^ t[0x237];
+ r0 = d ^ t[0x024];
+ } else {
+ r7 = r6;
+ r6 = r5;
+ r5 = r4;
+ r4 = r3;
+ r3 = r2;
+ r2 = r1;
+ r1 = r0;
+ r0 = d;
+ }
+ }
+
+ ecc[0] = r0;
+ ecc[1] = (r0 >> 8) | (r1 << 2);
+ ecc[2] = (r1 >> 6) | (r2 << 4);
+ ecc[3] = (r2 >> 4) | (r3 << 6);
+ ecc[4] = (r3 >> 2);
+ ecc[5] = r4;
+ ecc[6] = (r4 >> 8) | (r5 << 2);
+ ecc[7] = (r5 >> 6) | (r6 << 4);
+ ecc[8] = (r6 >> 4) | (r7 << 6);
+ ecc[9] = (r7 >> 2);
+
+ return 0;
+}
Modified: trunk/src/target/board/sheevaplug.cfg
===================================================================
--- trunk/src/target/board/sheevaplug.cfg 2009-05-12 17:14:10 UTC (rev 1767)
+++ trunk/src/target/board/sheevaplug.cfg 2009-05-12 17:29:16 UTC (rev 1768)
@@ -99,7 +99,7 @@
sheevaplug_init
nand probe 0
nand erase 0 0 4
- nand write 0 uboot.bin 0 oob_softecc
+ nand write 0 uboot.bin 0 oob_softecc_kw
resume
}
@@ -108,7 +108,7 @@
# load u-Boot into RAM and execute it
sheevaplug_init
- load_image /tmp/uboot.elf
+ load_image uboot.elf
verify_image uboot.elf
resume 0x00600000
|
