Menu
▾
▴
[Openocd-svn] r1290 - in trunk/testing: . build.test2
|
From: <du...@ma...> - 2008-12-28 00:23:09
|
Author: duane Date: 2008-12-28 00:23:06 +0100 (Sun, 28 Dec 2008) New Revision: 1290 Added: trunk/testing/build.test2/ trunk/testing/build.test2/Makefile trunk/testing/build.test2/README.txt trunk/testing/build.test2/local.uses Log: Added another test build configuration Added: trunk/testing/build.test2/Makefile =================================================================== --- trunk/testing/build.test2/Makefile 2008-12-27 22:43:56 UTC (rev 1289) +++ trunk/testing/build.test2/Makefile 2008-12-27 23:23:06 UTC (rev 1290) @@ -0,0 +1,193 @@ +# -*- mode: makefile -*- +#======================================== +# DO NOT DELETE THE LINE BELOW +_default: default +# DO NOT DELETE THE LINE_ABOVE +#======================================== + +#======================================== +# +# There are no user configurable options here. +# +# All user configurable options are in local.uses +# +include ./local.uses +# +#======================================== + +#======================================== +# This is the USB driver for the FTDI2XX chips. +# It is a "closed" solution from FTDICHIP.COM +# Some claim it is faster then the open/free +# solution: win32-libusb+libftdi. +# +ftd2xx.download: + mkdir -p ${VIRGINS} + wget -O ${FTD2XX_ZIPFILE_LOCAL} \ + ${FTD2XX_ZIPFILE_URL} + +ftd2xx.unpack: + rm -rf ${FTD2XX_WIN32_DIR} + mkdir -p ${FTD2XX_WIN32_DIR} + cd ${FTD2XX_WIN32_DIR} && unzip \ + ${FTD2XX_ZIPFILE_LOCAL} + +ftd2xx.build: + @echo "Nothing to do for: $@" + +ftd2xx.configure: + @echo "Nothing to do for: $@" + +ftd2xx.install: + @echo "Nothing to do for: $@" + +clean:: + rm -rf ${FTD2XX_WIN32_DIR} + +ftd2xx.all: ftd2xx.unpack ftd2xx.configure \ + ftd2xx.build ftd2xx.install + + +#========================================- +# LIBFTDI - requires LIBCONFUSE.. +# So we handle it here :-( + +libconfuse.download: + mkdir -p virgins + wget -O ${LIBCONFUSE_TARFILE_LOCAL} \ + ${LIBCONFUSE_TARFILE_URL} + +libconfuse.unpack: + tar xfz ${LIBCONFUSE_TARFILE_LOCAL} + +clean:: + rm -rf ${LIBCONFUSE_SRC_DIR} + +libconfuse.configure: + rm -rf ${LIBCONFUSE_BUILD_DIR} + mkdir -p ${LIBCONFUSE_BUILD_DIR} + cd ${LIBCONFUSE_BUILD_DIR} && \ + ${LIBCONFUSE_SRC_DIR}/configure \ + --prefix=${PREFIX} + +clean:: + rm -rf ${LIBCONFUSE_BUILD_DIR} + +libconfuse.build: + cd ${LIBCONFUSE_BUILD_DIR} && ${MAKE} + +libconfuse.install: + cd ${LIBCONFUSE_BUILD_DIR} && ${MAKE} install + +libconfuse.all: libconfuse.unpack libconfuse.configure \ + libconfuse.build libconfuse.install + +#======================================== +# LIBFTDI - the open source (and free) +# alternative to (closed) FTD2XX drivers. + +libftdi.download: + mkdir -p virgins + wget -O ${LIBFTDI_TARFILE_LOCAL} \ + ${LIBFTDI_TARFILE_URL} + +libftdi.unpack: + tar xfz ${LIBFTDI_TARFILE_LOCAL} + +clean:: + rm -rf ${LIBFTDI_SRC_DIR} + +libftdi.configure: + rm -rf ${LIBFTDI_BUILD_DIR} + mkdir -p ${LIBFTDI_BUILD_DIR} + cd ${LIBFTDI_BUILD_DIR} && \ + ${LIBFTDI_SRC_DIR}/configure \ + --prefix=${PREFIX} + +clean:: + rm -rf ${LIBFTDI_BUILD_DIR} + +libftdi.build: + cd ${LIBFTDI_BUILD_DIR} && ${MAKE} + +libftdi.install: + cd ${LIBFTDI_BUILD_DIR} && ${MAKE} install + +libftdi.all: libftdi.unpack libftdi.configure \ + libftdi.build libftdi.install + +#======================================== +# Openocd... + +openocd.bootstrap: + cd ${OPENOCD_SRC_DIR} && bash ./bootstrap + +openocd.configure: + rm -rf ${OPENOCD_BUILD_DIR} + mkdir -p ${OPENOCD_BUILD_DIR} + cd ${OPENOCD_BUILD_DIR} && ${OPENOCD_SRC_DIR}/configure \ + --prefix=${INSTALL_DIR} \ + ${OPENOCD_CONFIG_OPTIONS} + +openocd.build: + cd ${OPENOCD_BUILD_DIR} && ${MAKE} + +openocd.docs: + cd ${OPENOCD_BUILD_DIR}/docs && ${MAKE} + +openocd.docs.pdf: + cd ${OPENOCD_BUILD_DIR}/docs && ${MAKE} pdf + +openocd.docs.html: + cd ${OPENOCD_BUILD_DIR}/docs && ${MAKE} html + +# fixme: +# need to add a "make one huge html file target" + +openocd.install: + cd ${OPENOCD_BUILD_DIR} && ${MAKE} install + +#======================================== +# The world... + +# Manual step. +download.all: \ + ftd2xx.download \ + libconfuse.download \ + libftdi.download + +ifeq (x"${FT2232_DRIVER}",x"ftd2xx") +prebuild: ftd2xx.all +endif + +ifeq (x"${FT2232_DRIVER}",x"libftdi") +prebuild: libconfuse.all libftdi.all +endif + +remake: \ + openocd.bootstrap \ + openocd.configure \ + openocd.build \ + openocd.install + +initial.build : download.all prebuild remake + +all: + @echo "" + @echo " This makefile does not support an 'all' target" + @echo "" + @echo " If this is your *FIRST* time building... " + @echo " Then use this command: \"make initial.build\"" + @echo "" + @echo " The \"default\" target is for openocd developers" + @echo " and rebuilds openocd completely.." + @echo "" + +default: + test -d ${OPENOCD_SRC_DIR} || (echo "Where is: The OPENOCD source?"; exit 1) + ${MAKE} remake + +whatis_%: + @echo "" + @echo "Makevariable: $* => ${${*}}" + @echo "" Property changes on: trunk/testing/build.test2/Makefile ___________________________________________________________________ Name: svn:executable + * Added: trunk/testing/build.test2/README.txt =================================================================== --- trunk/testing/build.test2/README.txt 2008-12-27 22:43:56 UTC (rev 1289) +++ trunk/testing/build.test2/README.txt 2008-12-27 23:23:06 UTC (rev 1290) @@ -0,0 +1,59 @@ + +This makefile is how I Duane Ellis (op...@du...) builds +openocd test purposes on Cygwin. I have included it here so others +might also make use of the same configuration that I use to develop +Openocd. + +--Duane Ellis + +To make use of it do the following: + +(1) Check out openocd in the standard way. + +For example - in cygwin, type this: + + bash$ mkdir -p /home/duane/test + bash$ cd /home/duane/test + bash$ svn co https://svn.berlios.de/svnroot/repos/openocd/trunk openocd + +(2) COPY this folder "right above" where you have OpenOCD. + + bash$ cd /home/duane/test + bash$ cp ./openocd/testing/build.test2/* /home/duane/test/. + +(3) OPTIONALLY + + You might want to review the file "local.uses" + Change options and so forth at the top of the file. + +(4) Initially, you need to download some additional files. + These include "libftdi", "libconfuse", and the ftd2xx drivers. + +(5) You also need to build the supporting libraries and install them + (They are installed "locally" only) + + Type this command: + + bash$ cd /home/duane/test + + bash$ make initial.build + + which: (1) downloads files + (2) builds the libs + (3) builds OpenOCD + +(6) As you hack upon OpenOCD... to rebuild OpenOCD... + + bash$ cd /home/duane/test + + bash$ make remake + + which: (1) re-bootstraps + (2) re-configures + (3) re-builds + (4) re-installs. + +======= +**END** +======= + Property changes on: trunk/testing/build.test2/README.txt ___________________________________________________________________ Name: svn:executable + * Added: trunk/testing/build.test2/local.uses =================================================================== --- trunk/testing/build.test2/local.uses 2008-12-27 22:43:56 UTC (rev 1289) +++ trunk/testing/build.test2/local.uses 2008-12-27 23:23:06 UTC (rev 1290) @@ -0,0 +1,161 @@ +# -*- mode: makefile -*- +#======================================== +# DO NOT REMOVE THE LINE BELOW +HERE := $(shell pwd) +# DO NOT REMOVE THE LINE ABOVE +#======================================== + +# These are common CYGWIN build settings. +# Comment out things you do not want. +# Or unComment things you want. + +# PCs always have printer ports... +X86_PRINTER_PORT ?= y + +# Chose *ONE* of these three solutions. +#FTD2232_DRIVER = none +FT2232_DRIVER = ftd2xx +#FT2232_DRIVER = libftdi + +# Do you have "libusb" installed? +ifeq (x"${FT2232_DRIVER}",x"libftdi") +# With LIBFTDI... LIBUSB is manditory. +USE_LIBUSB = y +endif + +# By default... we assume libusb not present. +USE_LIBUSB ?= n + +#======================================== +# DO NOT EDIT SETTINGS BELOW THIS LINE +#======================================== + + + +#======================================== +# House keeping... + +# Solve problems on systems with DASH.. Grrr... +SHELL=/bin/bash +export SHELL + +VIRGINS ?= ${HERE}/virgins +INSTALL_DIR ?= $(HERE)/install +PREFIX ?= ${INSTALL_DIR} + +# Determine the build platform. +BUILD_SYSNAME_Linux =linux +BUILD_SYSNAME_linux =linux +BUILD_SYSNAME_CYGWIN_NT =cygwin +BUILD_SYSNAME_MINGW32_NT =mingw32 +BUILD_SYSNAME_Darwin =darwin +BUILD_SYSNAME_darwin =darwin +BUILD_SYSNAME :=$(BUILD_SYSNAME_$(shell uname --sysname | cut -d'-' -f1)) + +# And machine (ie: i686, x86_64, or what ever) +BUILD_MACHINE :=$(BUILD_SYSNAME).$(shell uname -m) + + +#======================================== +# + +FTD2XX_LINUX_VERSION=0.4.16 +FTD2XX_LINUX_DIR = ${HERE}/libftd2xx${FTD2XX_LINUX_VERSION} +FTD2XX_LINUX_64_DIR = ${HERE}/libftd2xx${FTD2XX_LINUX_VERSION}_x86_64 + + +# Wiggler type interfaces are here. +OPENOCD_CONFIG_OPTIONS_printer_y += --enable-parport +OPENOCD_CONFIG_OPTIONS_printer_y += --enable-parport-giveio +OPENOCD_CONFIG_OPTIONS_printer_y += --enable-gw16012 +OPENOCD_CONFIG_OPTIONS_printer_y += --enable-parport-giveio +OPENOCD_CONFIG_OPTIONS_printer_y += --enable-amtjtagaccel + + +# FTD2XX only supports these +OPENOCD_CONFIG_OPTIONS_ft2232_none = +OPENOCD_CONFIG_OPTIONS_ft2232_ftd2xx = --enable-ft2232_ftd2xx --enable-presto_ftd2xx --with-ftd2xx-win32-zipdir=${FTD2XX_WIN32_DIR} +OPENOCD_CONFIG_OPTIONS_ft2232_libftdi = --enable-ft2232_libftdi --enable-presto_libftdi + +# LIBUSB - adds support for these. +OPENOCD_CONFIG_OPTIONS_libusb_y += --enable-jlink +OPENOCD_CONFIG_OPTIONS_libusb_y += --enable-usbprog +OPENOCD_CONFIG_OPTIONS_libusb_y += --enable-rlink +OPENOCD_CONFIG_OPTIONS_libusb_y += --enable-vsllink +OPENOCD_CONFIG_OPTIONS_libusb_y += --enable-usbprog + +#======================================== +# EXPLICITY NOT SUPPORTED INTERFACES +# +# zy1000.c +# This is a standalone hardware box +# it is *NOT* a cygwin thing. +# +# at91rm9200.c +# This is a uC/Linux (or linux) that +# runs uC/Linux and uses the gpio pins +# to bit-bang JTAG stuff. +# +# ep93xx.c +# Just like at91rm9200 - different chip. + +#======================================== +# Build OPENOCD config options... +# Always enable "dummy" +OPENOCD_CONFIG_OPTIONS += --enable-dummy +# +# Today: Cannot enable 'oocd_trace' on cygwin. +# it assumes/uses termios functions like +# cfmakeraw() which do not exist on cygwin. +# +#OPENOCD_CONFIG_OPTIONS += --enable-oocd-trace +# +# Add printer options.. +OPENOCD_CONFIG_OPTIONS += ${OPENOCD_CONFIG_OPTIONS_printer_${X86_PRINTER_PORT}} + +# Add the FTD2232 based options. +OPENOCD_CONFIG_OPTIONS += ${OPENOCD_CONFIG_OPTIONS_ft2232_${FT2232_DRIVER}} + +# Add LIBUSB based options. +OPENOCD_CONFIG_OPTIONS += ${OPENOCD_CONFIG_OPTIONS_libusb_${USE_LIBUSB}} + + +#======================================== +# WARNING... the file on the ftdi chip site has a SPACE in the filename GRRR!!! +# We fix that with the "-O" option to wget. +FTD2XX_WIN32_VERSION=2.04.14 +FTD2XX_WIN32_DIR = ${HERE}/ftd2xx.win32 + +FTD2XX_ZIPFILE_LOCAL=${VIRGINS}/cdm.${FTD2XX_WIN32_VERSION}.zip +# Damn thing has a space in the F-ing filename! +FTD2XX_ZIPFILE_URL ="http://www.ftdichip.com/Drivers/CDM/CDM ${FTD2XX_WIN32_VERSION}.zip" + + +#======================================== +# LIBCONFUSE - used by LIBFTDI.. +LIBCONFUSE_VERSION=2.5 +LIBCONFUSE_TARFILE_LOCAL=${VIRGINS}/confuse-${LIBCONFUSE_VERSION}.tar.gz +LIBCONFUSE_TARFILE_URL =http://www.intra2net.com/de/produkte/opensource/ftdi/TGZ/confuse-${LIBCONFUSE_VERSION}.tar.gz + +LIBCONFUSE_SRC_DIR =${HERE}/confuse-${LIBCONFUSE_VERSION} +LIBCONFUSE_BUILD_DIR =${HERE}/confuse-build + + +#======================================== +# LIBFTDI... (which uses libusb, and libconfuse) +LIBFTDI_VERSION=0.14 +LIBFTDI_TARFILE_LOCAL = ${VIRGINS}/libftdi-${LIBFTDI_VERSION}.tar.gz +LIBFTDI_TARFILE_URL = http://www.intra2net.com/de/produkte/opensource/ftdi/TGZ/libftdi-${LIBFTDI_VERSION}.tar.gz + +LIBFTDI_SRC_DIR = ${HERE}/libftdi-${LIBFTDI_VERSION} +LIBFTDI_BUILD_DIR= ${HERE}/libftdi-build + +#======================================== +# Finally - OpenOCD... +# +OPENOCD_BUILD_DIR =${HERE}/openocd-build +OPENOCD_SRC_DIR =${HERE}/openocd + +#======================================== +# END .. +#======================================== Property changes on: trunk/testing/build.test2/local.uses ___________________________________________________________________ Name: svn:executable + * |
