[Openocd-svn] r1223 - trunk/src/target/target

[<du...@ma...>]

Author: duane
Date: 2008-12-10 12:44:45 +0100 (Wed, 10 Dec 2008)
New Revision: 1223

Modified:
   trunk/src/target/target/imote2.cfg
   trunk/src/target/target/is5114.cfg
   trunk/src/target/target/samsung_s3c6410.cfg
Log:
More fixes thanks to Kees Jongenburger

Modified: trunk/src/target/target/imote2.cfg
===================================================================
--- trunk/src/target/target/imote2.cfg	2008-12-10 01:18:10 UTC (rev 1222)
+++ trunk/src/target/target/imote2.cfg	2008-12-10 11:44:45 UTC (rev 1223)
@@ -35,7 +35,7 @@
 jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID
 
 set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME -varient pxa27x
+target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME -variant pxa27x
 $_TARGETNAME configure -work-area-virt 0x0x5c000000 -work-area-phys 0x0x5c000000 -work-area-size 0x10000 -work-area-backup 1
 # maps to PXA internal RAM. If you are using a PXA255
 # you must initialize SDRAM or leave this option off

Modified: trunk/src/target/target/is5114.cfg
===================================================================
--- trunk/src/target/target/is5114.cfg	2008-12-10 01:18:10 UTC (rev 1222)
+++ trunk/src/target/target/is5114.cfg	2008-12-10 11:44:45 UTC (rev 1223)
@@ -39,7 +39,7 @@
 
 #arm946e-s and 
 set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm966e -endian $_ENDIAN  -chain-position $_TARGETNAME  -varient arm966e
+target create $_TARGETNAME arm966e -endian $_ENDIAN  -chain-position $_TARGETNAME  -variant arm966e
 
 $_TARGETNAME configure -event reset-start { jtag_rclk 16 }
 $_TARGETNAME configure -event reset-init {

Modified: trunk/src/target/target/samsung_s3c6410.cfg
===================================================================
--- trunk/src/target/target/samsung_s3c6410.cfg	2008-12-10 01:18:10 UTC (rev 1222)
+++ trunk/src/target/target/samsung_s3c6410.cfg	2008-12-10 11:44:45 UTC (rev 1223)
@@ -23,14 +23,14 @@
    set _BSTAPID $BSTAPID
 } else {
   # force an error till we get a good number
-   set _BSTAPID 0xffffffff
+   set _BSTAPID 0x2b900f0f
 }
 
 if { [info exists CPUTAPID ] } {
    set _CPUTAPID $CPUTAPID
 } else {
   # force an error till we get a good number
-   set _CPUTAPID 0xffffffff
+   set _CPUTAPID 0x07b76f0f
 }
 
 #jtag scan chain
@@ -40,7 +40,7 @@
 jtag newtap $_CHIPNAME cpu     -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id $_CPUTAPID
 
 set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm11 -endian $_ENDIAN  -chain-position $_TARGETNAME -varient arm1176
+target create $_TARGETNAME arm11 -endian $_ENDIAN  -chain-position $_TARGETNAME -variant arm1176
 
 jtag_nsrst_delay 500
 jtag_ntrst_delay 500