[Openocd-svn] r1220 - trunk/src/target/target

[<du...@ma...>]

Author: duane
Date: 2008-12-08 12:23:04 +0100 (Mon, 08 Dec 2008)
New Revision: 1220

Modified:
   trunk/src/target/target/at91r40008.cfg
   trunk/src/target/target/at91sam9260.cfg
   trunk/src/target/target/at91sam9260minimal.cfg
Log:
Typos in config files found by Sergey Lapin

Modified: trunk/src/target/target/at91r40008.cfg
===================================================================
--- trunk/src/target/target/at91r40008.cfg	2008-12-06 13:13:02 UTC (rev 1219)
+++ trunk/src/target/target/at91r40008.cfg	2008-12-08 11:23:04 UTC (rev 1220)
@@ -29,7 +29,7 @@
 #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
 set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGENAME -variant arm7tdmi
+target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi
 
 
 $_TARGETNAME configure -event gdb-flash-erase-start {

Modified: trunk/src/target/target/at91sam9260.cfg
===================================================================
--- trunk/src/target/target/at91sam9260.cfg	2008-12-06 13:13:02 UTC (rev 1219)
+++ trunk/src/target/target/at91sam9260.cfg	2008-12-08 11:23:04 UTC (rev 1220)
@@ -9,7 +9,7 @@
 # Target configuration
 ######################
 
-$_TARGET_NAME configure -event reset-init {
+$_TARGETNAME configure -event reset-init {
 	# at reset chip runs at 32khz
 	jtag_khz 8
 	mww 0xfffffd08 0xa5000501         # RSTC_MR : enable user reset

Modified: trunk/src/target/target/at91sam9260minimal.cfg
===================================================================
--- trunk/src/target/target/at91sam9260minimal.cfg	2008-12-06 13:13:02 UTC (rev 1219)
+++ trunk/src/target/target/at91sam9260minimal.cfg	2008-12-08 11:23:04 UTC (rev 1220)
@@ -18,7 +18,7 @@
    set _CPUTAPID $CPUTAPID
 } else {
   # force an error till we get a good number
-   set _CPUTAPID 0xffffffff
+   set _CPUTAPID 0x0792603f
 }
 
 reset_config trst_and_srst
@@ -37,6 +37,6 @@
 target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
 
 # Internal sram1 memory
-$_TARGET_NAME configure -work-area-virt 0 -work-area-phys 0x00300000 -work-area-size 0x1000 -work-area-backup 1
+$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00300000 -work-area-size 0x1000 -work-area-backup 1