Re: [Openocd-development] PXA270: can read/write the core registers, but can't read memory and registers of the devices on chip

[Kaius H. <ka...@ol...>]

The JTAGkey-tiny dongle and board work OK, I have now successfully used 
the ColibriLoader software to download images to the board.

~kaius

Kaius Häggblom wrote:
> 
> The attached trace was produced by starting program:
> ./src/openocd -s tcl -f board/colibri_pxa320.cfg -f nterface/jtagkey.cfg 
>  -d 3 -l openocd.lo
> 
> ... and issuing following commands through telnet client:
> 
>  > reg
>  > reset halt
>  > reg cpsr 0xd3
>  > reset halt
> 
> Exactly as in original post with this issue on PXA270, writing and 
> reading regs work OK, but anything else fails.
> 
> ~kaius
> 
> 
> yvind Harboe wrote:
>> I would strongly encourage someone who's familiar with these patches
>> to repost them to this list so we can work on getting the changes merged.
>>
>> Should be in that projects and OpenOCD's interest...
>>
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Openocd-development mailing list
> Ope...@li...
> https://lists.berlios.de/mailman/listinfo/openocd-development