Re: [Openocd-development] [PATCH] Fix hammer.cfg

[Carlos A. <cma...@no...>]

Now attached as file because Thunderbird likes to wrap long lines...

Carlos Antunes wrote:
> Hello!
>
> I was finally able to program the flash of the Hammer target using the 
> flyswatter. The problem was related to a couple of typos on the 
> hammer.cfg config file. Please, find attached the svn diff against trunk 
> that fixes the problem.
>
> Thanks!
>
> Carlos Antunes
>
>
> Index: src/target/target/hammer.cfg
> ===================================================================
> --- src/target/target/hammer.cfg        (revision 1187)
> +++ src/target/target/hammer.cfg        (working copy)
> @@ -10,7 +10,7 @@
>  
>  
>  target create target0 arm920t -endian little -chain-position 0 -variant 
> arm920t
> -[new_target_name] configure -work-area-virt 0 -work-area-phys 
> 0x40800000 -work-area-size 0x20000 -work-area-backup 0
> +[new_target_name] configure -work-area-virt 0 -work-area-phys 
> 0x30800000 -work-area-size 0x20000 -work-area-backup 0
>  [new_target_name] configure -event reset-init {
>         # Reset Script for the TinCanTools S3C2410 Based Hammer Module
>         # http://www.tincantools.com
> @@ -39,7 +39,7 @@
>  }
>  
>  # speed up memory downloads
> -arm7 fast_memory_access enable
> +arm7_9 fast_memory_access enable
>  arm7_9 dcc_downloads enable
>  
>  #flash configuration
>
> _______________________________________________
> Openocd-development mailing list
> Ope...@li...
> https://lists.berlios.de/mailman/listinfo/openocd-development
>
>