[Openocd-development] Dummy driver

[Ø. H. <oyv...@zy...>]

Committed.

A dummy driver to test codepath w/no contact w/target.

Index: C:/workspace/openocd/configure.in
===================================================================
--- C:/workspace/openocd/configure.in	(revision 571)
+++ C:/workspace/openocd/configure.in	(working copy)
@@ -30,6 +30,10 @@
   AS_HELP_STRING([--enable-parport], [Enable building the pc parallel
port driver]),
   [build_parport=$enableval], [build_parport=no])

+AC_ARG_ENABLE(dummy,
+  AS_HELP_STRING([--enable-dummy], [Enable building the dummy port driver]),
+  [build_dummy=$enableval], [build_dummy=no])
+
 case "${host_cpu}" in
   i?86|x86*)
     AC_ARG_ENABLE(parport_ppdev,
@@ -144,6 +148,14 @@
   AC_DEFINE(BUILD_PARPORT, 0, [0 if you don't want parport.])
 fi

+if test $build_dummy = yes; then
+  build_bitbang=yes
+  AC_DEFINE(BUILD_DUMMY, 1, [1 if you want dummy driver.])
+else
+  AC_DEFINE(BUILD_DUMMY, 0, [0 if you don't want dummy driver.])
+fi
+
+
 if test $build_ep93xx = yes; then
   build_bitbang=yes
   AC_DEFINE(BUILD_EP93XX, 1, [1 if you want ep93xx.])
@@ -243,6 +255,7 @@
 AM_INIT_AUTOMAKE(openocd, 1.0)

 AM_CONDITIONAL(PARPORT, test $build_parport = yes)
+AM_CONDITIONAL(DUMMY, test $build_dummy = yes)
 AM_CONDITIONAL(GIVEIO, test $parport_use_giveio = yes)
 AM_CONDITIONAL(EP93XX, test $build_ep93xx = yes)
 AM_CONDITIONAL(ECOSBOARD, test $build_ecosboard = yes)
Index: C:/workspace/openocd/src/jtag/dummy.c
===================================================================
--- C:/workspace/openocd/src/jtag/dummy.c	(revision 0)
+++ C:/workspace/openocd/src/jtag/dummy.c	(revision 0)
@@ -0,0 +1,105 @@
+/***************************************************************************
+ *   Copyright (C) 2008 by Øyvind Harboe                                   *
+ *   oyv...@zy...                                               *
+ *                                                                         *
+ *   This program is free software; you can redistribute it and/or modify  *
+ *   it under the terms of the GNU General Public License as published by  *
+ *   the Free Software Foundation; either version 2 of the License, or     *
+ *   (at your option) any later version.                                   *
+ *                                                                         *
+ *   This program is distributed in the hope that it will be useful,       *
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
+ *   GNU General Public License for more details.                          *
+ *                                                                         *
+ *   You should have received a copy of the GNU General Public License     *
+ *   along with this program; if not, write to the                         *
+ *   Free Software Foundation, Inc.,                                       *
+ *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
+ ***************************************************************************/
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "replacements.h"
+
+#include "jtag.h"
+#include "bitbang.h"
+
+
+int dummy_speed(int speed);
+int dummy_register_commands(struct command_context_s *cmd_ctx);
+int dummy_init(void);
+int dummy_quit(void);
+
+/* The dummy driver is used to easily check the code path
+ * where the target is unresponsive.
+ */
+jtag_interface_t dummy_interface =
+{
+	.name = "dummy",
+	
+	.execute_queue = bitbang_execute_queue,
+
+	.speed = dummy_speed,	
+	.register_commands = dummy_register_commands,
+	.init = dummy_init,
+	.quit = dummy_quit,
+};
+
+int dummy_read(void);
+void dummy_write(int tck, int tms, int tdi);
+void dummy_reset(int trst, int srst);
+void dummy_led(int on);
+
+bitbang_interface_t dummy_bitbang =
+{
+	.read = dummy_read,
+	.write = dummy_write,
+	.reset = dummy_reset,
+	.blink = dummy_led
+};
+
+int dummy_read(void)
+{
+	return 1;
+}
+
+
+void dummy_write(int tck, int tms, int tdi)
+{
+}
+
+void dummy_reset(int trst, int srst)
+{
+}
+	
+
+int dummy_speed(int speed)
+{
+	return ERROR_OK;
+}
+
+int dummy_register_commands(struct command_context_s *cmd_ctx)
+{
+	return ERROR_OK;
+}
+
+
+int dummy_init(void)
+{
+	bitbang_interface = &dummy_bitbang;	
+
+	return ERROR_OK;
+}
+
+int dummy_quit(void)
+{
+	return ERROR_OK;
+}
+
+
+void dummy_led(int on)
+{
+}
+
Index: C:/workspace/openocd/src/jtag/jtag.c
===================================================================
--- C:/workspace/openocd/src/jtag/jtag.c	(revision 571)
+++ C:/workspace/openocd/src/jtag/jtag.c	(working copy)
@@ -156,7 +156,11 @@
 #if BUILD_PARPORT == 1
 	extern jtag_interface_t parport_interface;
 #endif
-
+	
+#if BUILD_DUMMY == 1
+	extern jtag_interface_t dummy_interface;
+#endif
+	
 #if BUILD_FT2232_FTD2XX == 1
 	extern jtag_interface_t ft2232_interface;
 #endif
@@ -196,6 +200,9 @@
 #if BUILD_PARPORT == 1
 	&parport_interface,
 #endif
+#if BUILD_DUMMY == 1
+	&dummy_interface,
+#endif
 #if BUILD_FT2232_FTD2XX == 1
 	&ft2232_interface,
 #endif
Index: C:/workspace/openocd/src/jtag/Makefile.am
===================================================================
--- C:/workspace/openocd/src/jtag/Makefile.am	(revision 571)
+++ C:/workspace/openocd/src/jtag/Makefile.am	(working copy)
@@ -25,6 +25,12 @@
 PARPORTFILES =
 endif

+if DUMMY
+DUMMYFILES = dummy.c
+else
+DUMMYFILES =
+endif
+
 if FT2232_LIBFTDI
 FT2232FILES = ft2232.c
 else
@@ -87,7 +93,7 @@
 USBPROGFILES =
 endif

-libjtag_a_SOURCES = jtag.c $(BITBANGFILES) $(PARPORTFILES)
$(FT2232FILES) $(AMTJTAGACCELFILES) $(EP93XXFILES) \
+libjtag_a_SOURCES = jtag.c $(BITBANGFILES) $(PARPORTFILES)
$(DUMMYFILES) $(FT2232FILES) $(AMTJTAGACCELFILES) $(EP93XXFILES) \
 	$(AT91RM9200FILES) $(GW16012FILES) $(BITQFILES) $(PRESTOFILES)
$(USBPROGFILES) $(ECOSBOARDFILES)

 noinst_HEADERS = bitbang.h jtag.h


-- 
Øyvind Harboe
http://www.zylin.com - eCos ARM & FPGA developer kit