OpenNX Client / Bugs / #80 OpenNX crashes on Mac OS X Yosemite

hachepunto - 2014-12-03

Here also I can confirm. OpenNX-0.16.0.725 and Xquartz-2.7.5 in Yosemite 10.10.1.
Thx!

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Morgan Hough - 2014-12-03

Yes thanks Jiro, someone else had reported this and I couldn't get it working before but your post prompted me to give it another shot. I installed OpenNX 0.16.0.725 and XQuartz 2.7.5 and I tried it and it didn't work. I then logged out and logged back in (which I should have done in the first place) and now it works! Thanks again. So happy to have this working again.

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Jiro Fujita - 2014-12-05

Just a follow up to my own post from two days ago. I tested OpenNX 0.16.0.725 with a few different version of XQuartz. Unfortunately, it has to be OpenNX 0.16.0.725 with XQuartz 2.7.5 to work with Yosemite (10.10.1, to be exact).

Unfortunately, I can't seem to get xterm, xclock,xeye, etc to work from Terminal.app any more. If I do, I get an error saying "Can't open display: /private/tmp/com.apple.launchd.NDEhRSLs4u/org.macforge.xquartz:0" (or something like that).
The file itself does exists, however, the path is 65 character long. I'm guessing this is the 64 character limitation that davmp reported a while back.

Of course, this does not mean that I can't start X11 applications: I can always start xterm from XQuartz itself. Once I do, from there, I can call xeyes, xclock, or any other ones (I think: I can't possibly try everything…). So, this isn't a huge problem. For the very least, with XQuartz 2.7.5, I can use OpenNX when I need it. It also appears that I can do remote X11 via ssh tunneling without any problem. So, I am happy where it is (at least for now).

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Florian Bruckner - 2014-12-10

XQuartz 2.7.5 on Yosemite did not fix it for me. I dug a bit further into the problem, and this is what I found:

With Yosemite, the paths for launchd services changes. Previously it was /tmp/launchd, with Yosemite it is /private/tmp/com.apple.launchd.

The problem seems to be in nxproxy, specifically Loop.cpp, which contains the following snippet:

#ifdef __APPLE__ if (strncasecmp(display, "/tmp/launch", 11) == 0) { #ifdef TEST *logofs << "Loop: Using launchd service on socket '" << display << "'.\n" << logofs_flush; #endif useLaunchdSocket = 1; } #endif

This test fails on Yosemite, causing that function to believe that the DISPLAY is actually a hostname, and therefore tries to resolve it, but without success.

I believe it should be sufficient to just add a test so it detects the new path also as launchd socket. I couldn't get nxproxy to build on my machine, so I did not verify this.

Last edit: Florian Bruckner 2014-12-10
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Florian Bruckner - 2014-12-13

Finally found a workaround. You need macports (from http://www.macports.org) installed with the package nxproxy. The Yosemite problem in nxproxy has been fixed there:

$ sudo port install nxproxy

Then go to /Library/OpenNX/bin and replace the nxproxy here with the nxproxy provided by macports:

$ sudo mv /Library/OpenNX/bin/nxproxy /Library/OpenNX/bin/nxproxy.old $ sudo ln -s /opt/local/bin/nxproxy /Library/OpenNX/bin/nxproxy
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
- Jiro Fujita - 2014-12-15
  
  Florian,
  Did you get OpenNX working with a new nxproxy with XQuartz 2.7.5 or 2.7.7? If you got it working with 2.7.7, I may be interested in trying…
  
  If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
- Pavel Snopok - 2014-12-16
  
  Cannot confirm. Tried with XQuartz 2.7.7 + OpenNX 725 and 729, no luck, still the same behavior: "Starting session", then silently back to the login menu :(
  
  If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
- Hans Rettenwender - 2014-12-27
  
  Hi Florian, thanks for posting this solution. Unfortunately, it does not work for me. I installed macports and subsequently executed the commands you posted in terminal. The command "port install nxproxy" returned some errors, though. Is there something that I might have overlooked? You write "go to /Library/OpenNX/bin and replace the nxproxy here with the nxproxy provided by macports:". Do I have to change the directory or is it sufficient to execute the command? Could you post the path to the NXPROXY that comes with macports?
  
  Thanks a lot in advance!!
  
  Last edit: Hans Rettenwender 2014-12-27
  
  If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
  - Florian Bruckner - 2014-12-28
    
    Hi Hans,
    
    macports uses /opt/local as its base directory, so nxproxy is in /opt/local/bin.
    
    You say that port install nxproxy returned errors - it did not for me. These are the ports that I have installed (I usually use homebrew, so this is very minimal):
    
    jpeg @9a_1 (active)
    libpng @1.6.15_0 (active)
    nxcomp @3.5.0.28_0 (active)
    nxproxy @3.5.0.28_0 (active)
    xorg-xproto @7.0.26_0 (active)
    zlib @1.2.8_0 (active)
    
    There may be other issues that I do not have with my installation, but this is all I did to get it running.
    
    If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Florian Bruckner - 2014-12-15

Yes, got it working with 2.7.7.

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
- urilabob1 - 2015-02-24
  
  Florian, thank you for discovering this fix. If you are still listening, could you confirm the configuration that worked for you? I am trying to get it working with:
  1. OSX: Yosemite version 10.10.2
  2. Opennx: Version 0.16.0.729 (RELEASE)
  3. XQuartz: XQuartz 2.7.7 (xorg-server 1.15.2)
  4. nxproxy: Activating nxproxy @3.5.0.28_0
  In , /Library/OpenNX/bin I have
  lrwxr-xr-x 1 root wheel 22 21 Feb 15:49 nxproxy -> /opt/local/bin/nxproxy
  However when I try to connect, I still see the behaviour described by others earlier: opennx goes through all the normal authentication cycle (it seems to ignore any previously open connections), and then bounces back to the login window. Is there any obvious way my setup differs from yours?
  
  If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Florian Bruckner - 2015-02-24

This is exactly my setup. I have applied this to a couple of machines I have been using over the past weeks, and it worked on all of them.

We may be looking at two distinct problems, because there are earlier posts to this issue that a downgrade of XQuartz would do the trick. It didn't (and couldn't, due to the nature of the problem) resolve the problem for me, but did for others.

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
- urilabob1 - 2015-02-24
  
  Thanks Florian. I think you're right about multiple bugs. My situation is this:
  .Downgrading to OpenNX 0.116.0.725 causes magic cookie problems, so I have to stick with 729.
  .XQuartz 2.7.7 gives the bounce-back-to-opennx problem, whether or not I have your link-to-nxproxy trick set up
  .XQuartz 2.7.5 runs, but doesn't give a proper nx window (no top bar, sets itself up across both screens I am using, and using the whole screen)
  
  The latter isn't really satisfactory, but I desperately need nx, so I guess that's what I'm going to have to live with for now. Thanks for all your help,
  Bob
  
  If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
  - Jochen Schnuerle - 2015-02-26
    
    Bob,
    same to me: mac osx 10.10.2 and XQartz 2.7.5 works (without window border) but 2.7.6, 2.7.7 and new 2.7.8_beta3 does not work. No NX window open after login. I try to set DISPLAY var and all the other tips, but only 2.7.5 works (and without a trick or patch).
    -js
    
    If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
    - Matt Suttterer - 2015-03-05
      
      I also have tried Florian's fix on OS 10.10.2, but can only get OpenNX 0.116.0.725 to work with XQuartz 2.7.5, though I do get the nx window border under that config. No luck with XQuartz 2.7.6, 2.7.7 or 2.7.8_beta3.
      
      If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

urilabob1 - 2015-03-07

Since we don't yet have a reliable fix, I did some exploration of alternatives. Previously, I had tried x2go and found it too unreliable for production use. I'm not sure what has changed (client or server), but so far I have found the latest mac client (4.0.3.2) on Yosemite to play very reliably, both on LAN links (to Fedora 20/21 servers) and on intercontinental WAN links to CentOS (even so, I'd recommend a lightweight desktop such as lxde/lxdm for such applications). If you are still struggling to get nx to work cleanly, this might be a good alternative.

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

smorovic - 2015-03-09

It seems that the nxssh binary is broken on Yosemite (and none of recipes posted here really help). It needs to be recompiled against recent X libraries, and here is the how to get it done with Xquartz 2.7.7 on Yosemite. It will work using other OpenNX 729 binaries, so have it installed.

Instructions are loosely based on:
http://www.nerdenmeister.org/2013/11/09/build-opennx-on-os-x-10-9-mavericks/

1.
Set up MacPorts and install these packages (maybe only nxcomp and nxproxy are needed, but I'm posting what I did):

sudo port install wxWidgets-3.0 curl libidn openssl zlib nxcomp libpng jpeg svn2cl cctools libtool autoconf automake pulseaudio

download nxssh-3.5.0-2.tar.gz (google for it) and compile it:

tar xzf nxssh-3.5.0-2.tar.gz
cd nxssh

UPDATE:added correct env for configure command

CPPFLAGS="-I/opt/local/include -I/opt/local/include/nx" LDFLAGS="-L/opt/local/lib -L/opt/local/lib/nx -lresolv" ./configure --prefix=/opt/local

make -j4

(hint: 3.5.1-2 source might also work but I didn't try..)

copy the binary to OpenNX library area:
sudo cp nxssh /LIbrary/OpenNX/bin/

That's it! Run OpenNX and try to connect. If you get an older session with messed up keymap, start another one (happened to me once but later it was always ok).

Last edit: smorovic 2015-03-13
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
- urilabob1 - 2015-03-10
  
  Thanks smorovec; can I check one part of your explanation? When I
  followed your recipe, configure picked up the apple openssl
  installation rather than the MacPorts one; for some reason, although
  my mac installation is (as far as I can tell) completely up-to-date,
  the openssl headers and libraries were inconsistent versions, so I was
  unable to get it to work. I tried passing command line parameters to
  configure, to try to switch it to use /opt/local, but haven't been
  able to find the right combination. I'm guessing you are using
  environment variables for the purpose; can you let us know how you
  have them set up?
  
  On Tue, Mar 10, 2015 at 4:35 AM, smorovic smorovic@users.sf.net wrote:
  
  It seems that the nxssh binary is broken on Yosemite (and none of recipes
  posted here really help). It needs to be recompiled against recent X
  libraries, and here is the how to get it done with Xquartz 2.7.7 on
  Yosemite. It will work using other OpenNX 729 binaries, so have it
  installed.
  
  Instructions are loosely based on:
  http://www.nerdenmeister.org/2013/11/09/build-opennx-on-os-x-10-9-mavericks/
  
  1.
  Set up MacPorts and install these packages (maybe only nxcomp and nxproxy
  are needed, but I'm posting what I did):
  
  sudo port install wxWidgets-3.0 curl libidn openssl zlib nxcomp libpng jpeg
  svn2cl cctools libtool autoconf automake pulseaudio
  
  download nxssh-3.5.0-2.tar.gz (google for it) and compile it:
  
  tar xzf nxssh-3.5.0-2.tar.gz
  cd nxssh
  ./configure
  make
  
  (hint: 3.5.1-2 source might also work but I didn't try..)
  
  copy the binary to OpenNX library area:
  sudo cp nxssh /LIbrary/OpenNX/bin/
  
  That's it! Run OpenNX and try to connect. If you get an older session with
  messed up keymap, start another one (happened to me once but later it was
  always ok).
  
  [bugs:#80] OpenNX crashes on Mac OS X Yosemite
  
  Status: open
  Group: v1.0_(example)
  Created: Fri Oct 17, 2014 06:36 AM UTC by Morgan Hough
  Last Updated: Sat Mar 07, 2015 05:03 AM UTC
  Owner: nobody
  
  Here is the Mac OS X Yosemite problem report:
  
  Process: opennx [72140]
  Path: /Applications/OpenNX/OpenNX.app/Contents/MacOS/OpenNXapp
  Identifier: org.opennx.OpenNX
  Version: ???
  Code Type: X86 (Native)
  Parent Process: ??? [1]
  Responsible: opennx [72140]
  User ID: 501
  
  Date/Time: 2014-10-16 23:33:27.490 -0700
  OS Version: Mac OS X 10.10 (14A389)
  Report Version: 11
  Anonymous UUID: F8C2E5EC-D8F4-2826-0590-04EFCFA73FDC
  
  Time Awake Since Boot: 4400 seconds
  
  Crashed Thread: 0
  
  Exception Type: EXC_BREAKPOINT (SIGTRAP)
  Exception Codes: 0x0000000000000002, 0x0000000000000000
  
  Application Specific Information:
  dyld: launch, loading dependent libraries
  
  Dyld Error Message:
  Library not loaded: /usr/X11/lib/libSM.6.dylib
  Referenced from: /Library/OpenNX/*/opennx
  Reason: image not found
  
  Binary Images:
  0x8fe61000 - 0x8fe94e03 dyld (353.2.1)
  <EBFF7998-58E8-32F5-BF0D-9690278EC792> /usr/lib/dyld
  0x90aaa000 - 0x90b9bffb libiconv.2.dylib (42)
  <4AF77F10-0BEC-3BE0-99DF-C5170EDB316B> /usr/lib/libiconv.2.dylib
  0x911a5000 - 0x911b4ff3 com.apple.opengl (11.0.7 - 11.0.7)
  <C4738E5F-C178-3A01-B941-C638E6A14D7C>
  /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
  0x91e01000 - 0x91e01fff com.apple.Carbon (154 - 157)
  <5A078967-8437-3721-A6B1-70CC00461D7B>
  /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
  0x952fd000 - 0x95587ffb com.apple.WebKit (10600 - 10600.1.25)
  <DCD91A86-737E-352F-921A-5A029DCAD0D7>
  /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
  0x96a5b000 - 0x96a62fff com.apple.agl (3.3.0 - AGL-3.3.0)
  <B5C27F6B-1650-33A2-A310-BB4C12385E49>
  /System/Library/Frameworks/AGL.framework/Versions/A/AGL
  0x976bc000 - 0x97739ff3 com.apple.framework.IOKit (2.0.2 - 1050.1.21)
  <C3A9E799-0B67-3292-AF44-43CCA846C169>
  /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
  0x97741000 - 0x97742fff libSystem.B.dylib (1213)
  <77FA0B3F-4412-31F6-A798-21D068AE16C3> /usr/lib/libSystem.B.dylib
  0x99b92000 - 0x99b92fff com.apple.Cocoa (6.8 - 21)
  <6AF80DDB-C28E-36FF-BC11-D7D561AC52A9>
  /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
  0x9b1a7000 - 0x9b42cfff com.apple.QuickTime (7.7.3 - 2890)
  <34289D2B-07CC-3D12-8F32-6F97D96DEE81>
  /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime
  0x9b8e7000 - 0x9b8f5ff7 libz.1.dylib (55)
  <DF3B8F77-8931-3A6B-8BDF-DB67315050E6> /usr/lib/libz.1.dylib
  
  Model: MacBookPro10,1, BootROM MBP101.00EE.B05, 4 processors, Intel Core i7,
  2.7 GHz, 16 GB, SMC 2.3f36
  Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In
  Graphics: NVIDIA GeForce GT 650M, NVIDIA GeForce GT 650M, PCIe, 1024 MB
  Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD,
  0x484D5434314753364D465238432D50422020
  Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD,
  0x484D5434314753364D465238432D50422020
  AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xEF),
  Broadcom BCM43xx 1.0 (7.15.124.12.8)
  Bluetooth: Version 4.3.0f10 14890, 3 services, 27 devices, 1 incoming serial
  ports
  Network Service: Wi-Fi, AirPort, en0
  Serial ATA Device: APPLE SSD SM768E, 751.28 GB
  USB Device: Hub
  USB Device: FaceTime HD Camera (Built-in)
  USB Device: Hub
  USB Device: Hub
  USB Device: BRCM20702 Hub
  USB Device: Bluetooth USB Host Controller
  USB Device: Apple Internal Keyboard / Trackpad
  Thunderbolt Bus: MacBook Pro, Apple Inc., 23.4
  
  Sent from sourceforge.net because you indicated interest in
  https://sourceforge.net/p/opennx/bugs/80/
  
  To unsubscribe from further messages, please visit
  https://sourceforge.net/auth/subscriptions/
  
  Related
  
  Bugs: #80
  
  If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
  - smorovic - 2015-03-10
    
    You're correct, I forgot to put correct instructions for compiling nxssh (actually taken from www.nerdenmeister.org page). So, nxssh configure needs to be run as:
    
    CPPFLAGS="-I/opt/local/include -I/opt/local/include/nx" LDFLAGS="-L/opt/local/lib -L/opt/local/lib/nx -lresolv" ./configure --prefix=/opt/local
    
    If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
    - urilabob1 - 2015-03-12
      
      Thank you for the details; it's now working perfectly for me.
      Best Wishes
      Bob
      
      On Wed, Mar 11, 2015 at 5:10 AM, smorovic smorovic@users.sf.net wrote:
      
      You're correct, I forgot to put correct instructions for compiling nxssh
      (actually taken from www.nerdenmeister.org page). So, nxssh configure needs
      to be run as:
      
      CPPFLAGS="-I/opt/local/include -I/opt/local/include/nx"
      LDFLAGS="-L/opt/local/lib -L/opt/local/lib/nx -lresolv" ./configure
      --prefix=/opt/local
      
      If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Martin Richter - 2015-08-21

Today we created a binary packet for openNX which is functional under yosemite.
feel free to check it out or make improvements.

currently known problems are:
some crashes with session assistant (works, but not fine)
problem with 2 display systems: be aware to create a user defined screen size,
otherwise the display stays in background.

download it at: http://www.hirnschwund.de/OpenNX.pkg.zip

factsoft , Martin Richter, Max Czarnecki

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
- Hans Rettenwender - 2015-08-24
  
  Vielen Dank für Ihr Engagement und die Benachrichtigung!!
  
  Jörg Glockengießer
  
  Am 21.08.2015 um 17:42 schrieb Martin Richter factsoft@users.sf.net:
  
  Today we created a binary packet for openNX which is functional under yosemite.
  feel free to check it out or make improvements.
  
  currently known problems are:
  some crashes with session assistant (works, but not fine)
  problem with 2 display systems: be aware to create a user defined screen size,
  otherwise the display stays in background.
  
  download it at: http://www.hirnschwund.de/OpenNX.pkg.zip
  
  factsoft , Martin Richter, Max Czarnecki
  
  [bugs:#80] OpenNX crashes on Mac OS X Yosemite
  
  Status: open
  Group: v1.0_(example)
  Created: Fri Oct 17, 2014 06:36 AM UTC by Morgan Hough
  Last Updated: Tue Apr 07, 2015 04:18 AM UTC
  Owner: nobody
  
  Here is the Mac OS X Yosemite problem report:
  
  Process: opennx [72140]
  Path: /Applications/OpenNX/OpenNX.app/Contents/MacOS/OpenNXapp
  Identifier: org.opennx.OpenNX
  Version: ???
  Code Type: X86 (Native)
  Parent Process: ??? [1]
  Responsible: opennx [72140]
  User ID: 501
  
  Date/Time: 2014-10-16 23:33:27.490 -0700
  OS Version: Mac OS X 10.10 (14A389)
  Report Version: 11
  Anonymous UUID: F8C2E5EC-D8F4-2826-0590-04EFCFA73FDC
  
  Time Awake Since Boot: 4400 seconds
  
  Crashed Thread: 0
  
  Exception Type: EXC_BREAKPOINT (SIGTRAP)
  Exception Codes: 0x0000000000000002, 0x0000000000000000
  
  Application Specific Information:
  dyld: launch, loading dependent libraries
  
  Dyld Error Message:
  Library not loaded: /usr/X11/lib/libSM.6.dylib
  Referenced from: /Library/OpenNX/*/opennx
  Reason: image not found
  
  Binary Images:
  0x8fe61000 - 0x8fe94e03 dyld (353.2.1) <EBFF7998-58E8-32F5-BF0D-9690278EC792> /usr/lib/dyld
  0x90aaa000 - 0x90b9bffb libiconv.2.dylib (42) <4AF77F10-0BEC-3BE0-99DF-C5170EDB316B> /usr/lib/libiconv.2.dylib
  0x911a5000 - 0x911b4ff3 com.apple.opengl (11.0.7 - 11.0.7) <C4738E5F-C178-3A01-B941-C638E6A14D7C> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
  0x91e01000 - 0x91e01fff com.apple.Carbon (154 - 157) <5A078967-8437-3721-A6B1-70CC00461D7B> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
  0x952fd000 - 0x95587ffb com.apple.WebKit (10600 - 10600.1.25) <DCD91A86-737E-352F-921A-5A029DCAD0D7> /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
  0x96a5b000 - 0x96a62fff com.apple.agl (3.3.0 - AGL-3.3.0) <B5C27F6B-1650-33A2-A310-BB4C12385E49> /System/Library/Frameworks/AGL.framework/Versions/A/AGL
  0x976bc000 - 0x97739ff3 com.apple.framework.IOKit (2.0.2 - 1050.1.21) <C3A9E799-0B67-3292-AF44-43CCA846C169> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
  0x97741000 - 0x97742fff libSystem.B.dylib (1213) <77FA0B3F-4412-31F6-A798-21D068AE16C3> /usr/lib/libSystem.B.dylib
  0x99b92000 - 0x99b92fff com.apple.Cocoa (6.8 - 21) <6AF80DDB-C28E-36FF-BC11-D7D561AC52A9> /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
  0x9b1a7000 - 0x9b42cfff com.apple.QuickTime (7.7.3 - 2890) <34289D2B-07CC-3D12-8F32-6F97D96DEE81> /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime
  0x9b8e7000 - 0x9b8f5ff7 libz.1.dylib (55) <DF3B8F77-8931-3A6B-8BDF-DB67315050E6> /usr/lib/libz.1.dylib
  
  Model: MacBookPro10,1, BootROM MBP101.00EE.B05, 4 processors, Intel Core i7, 2.7 GHz, 16 GB, SMC 2.3f36
  Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In
  Graphics: NVIDIA GeForce GT 650M, NVIDIA GeForce GT 650M, PCIe, 1024 MB
  Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D5434314753364D465238432D50422020
  Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D5434314753364D465238432D50422020
  AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xEF), Broadcom BCM43xx 1.0 (7.15.124.12.8)
  Bluetooth: Version 4.3.0f10 14890, 3 services, 27 devices, 1 incoming serial ports
  Network Service: Wi-Fi, AirPort, en0
  Serial ATA Device: APPLE SSD SM768E, 751.28 GB
  USB Device: Hub
  USB Device: FaceTime HD Camera (Built-in)
  USB Device: Hub
  USB Device: Hub
  USB Device: BRCM20702 Hub
  USB Device: Bluetooth USB Host Controller
  USB Device: Apple Internal Keyboard / Trackpad
  Thunderbolt Bus: MacBook Pro, Apple Inc., 23.4
  
  Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/opennx/bugs/80/
  
  To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/
  
  Related
  
  Bugs: #80
  
  If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
- James Dundas - 2017-08-14
  
  I used this on El Capitan and it worked great, but I just upgraded to Sierra and it connects and then closes.
  Is there an update for Sierra?
  
  If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

OpenNX crashes on Mac OS X Yosemite

Group

Searches

Help

#80 OpenNX crashes on Mac OS X Yosemite

Related

Discussion

Related

Related