From: SourceForge.net <no...@so...> - 2013-03-12 21:55:15
|
Bugs item #1235168, was opened at 2005-07-09 05:01 Message generated for change (Comment added) made by manuelbi You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=421861&aid=1235168&group_id=38274 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: General/misc Group: None Status: Open Resolution: None Priority: 5 Private: No Submitted By: Manuel Bilderbeek (manuelbi) Assigned to: Wouter Vermaelen (m9710797) Summary: microWAVer (and CD Sequential) WAV files won't work Initial Comment: They do work on a real MSX. One example is attached. ---------------------------------------------------------------------- >Comment By: Manuel Bilderbeek (manuelbi) Date: 2013-03-12 14:55 Message: Hmm, now the test signal is approved again... no idea why though. Same happens as the original comment of 2005-09-28. MicroWAVer still doesn't work, still gives some error (after loading the loader, you have to disable motorcontrol and then it says: Loading:{some gibberish} <Err> ---------------------------------------------------------------------- Comment By: Manuel Bilderbeek (manuelbi) Date: 2009-06-10 13:22 Message: When testing CD Sequential now, the test signal is not approved (almost, but not enough). And there's not much one can do to 'adjust the signal', as the program advises.... Also, the attached MicroWAVer sample hangs up almost immediately after loading. ---------------------------------------------------------------------- Comment By: Manuel Bilderbeek (manuelbi) Date: 2005-09-28 00:12 Message: Logged In: YES user_id=78178 CD Sequential files aren't working either. The loader works and is satisfied with the test signal. However, when loading an actual game, you always get "Checksum Error". This is most likely caused by the same bug as for MicroWAVer. ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=421861&aid=1235168&group_id=38274 |