[Openfoam-extend-stammtisch] OpenFOAM Stammtisch 2025 - Ablauf

[Henrik R. <h.r...@wi...>]

Dear FOAMers,

The OpenFOAM regulars' table (Stammtisch) is an informal meeting of
OpenFOAM users and CFD enthusiasts. It is intended to provide a platform
for networking and exchange and will be organised this year in Göttingen
at NHR-Nord@Göttingen.

The meeting will take place on 1 and 2 April 2025. On the first day, an
informal dinner is planned to get to know each other (self-paying). The
second day is the main day of the Stammtisch and will feature many
exciting presentations, a guided tour of the GWDG HPC cluster and two
special sessions: ‘Bring your problem’ and ‘Find your employer’.
Participation is free of charge on both days, but registration is
required as seating is limited. You can also submit your contributions
via the registration page. These can be presentations, potential
employers and issues to be discussed. For further questions and to
register, please contact our organisation team.

Further information and registration details can be found in this link
<https://events.gwdg.de/event/1010/>.

Furthermore I would like to draw you attention to the 20. OpenFOAM
Workshop <https://www.openfoam25.at/> which will be held from 30.6. to
4.7. in Vienna.

Best Regards,

Henrik

zip ---

vorläufiger Ablauf:

  * 08:30 Willkommen+Kaffee
  * 09:00 Begrüßung
  * 09:10 H. Rusche (Wikki GmbH): Inno4Scale Scale-Track / AMCG
  * 09:35 M. Koch (U Göttingen): Single cavitation bubbles and 1001 /
    pre- and post-processing scripts
  * 10:00 H. Ibrahim (TU Clausthal): Efficient parallel techniques for
    interface-resolved particle transport
  * 10:25 Kaffeepause
  * 10:50 R. Aragal (Baker Hughes): Implementierung von
    nicht-Newtonschen Modellen für Wärmeübertragungs-Solver
  * 11:15 Problem 1: Convergence of pseudo-transient solutions of
    annular flow in drilling application (A. Starostin, Baker Hughes)
  * 11:40 P. Höhn (GWDG): NHR Services for OpenFOAM users
  * 12:05 Mittagspause
  * 13:05 Find your employer / GWDG Führung / Kleingruppenarbeit
  * 13:50 M. Müller (U Wuppertal): Numerische Modellierung der
    hydraulischen Leistungsfähigkeit von Straßeneinläufe
  * 14:15 Problem 2: Analyse der hydraulischen Leistungsfähigkeit von
    Drosselorganen (M. Müller, U Wuppertal)
  * 14:40 Problem 3: Modeling filtration phenomenon (J. Dave, Herding GmbH)
  * 15:05 Kaffeepause
  * 15:30 H.-M. Schlesier (DLR): Compressible low-Mach impingement setup
    for heat transfer
  * 15:55 Q. Wang (TU Clausthal): Liquid Films in OpenFOAM
  * 16:20 Dein Vortrag / Dein Problem
  * 16:45 Planung der nächsten Veranstaltungen und Schlusswort
  * 17:00 Ende der Veranstaltung

--
Dr. Henrik Rusche
WIKKI
Gesellschaft für numerische Kontinuumsmechanik mbH
Ziegelbergsweg 68, 38855 Wernigerode, Germany
Amtsgericht Göttingen: HRB 205124
--
+49 3943 4082128
www.wikki-gmbh.de