From: Andreas L. <and...@un...> - 2016-02-01 14:02:32
|
Ph.D./Postdoc position We are still seeking a candidate for an PHD/Postdoc position on "OpenFOAM modelling of crystal growth, sedimentation and visco-plasticity of the packed bed during solidification of alloys" Topic of Research During solidification of some alloys equiaxed grains form, grow and move. Small grains are carried with the melt flow, while with further growth grains often sink down and sediment. At a certain dense packing, they form a coherent network with intergranular/interdendritic liquid. Such a semi-solid slurry is known to have visco-plastic flow behavior. In addition, thermal contraction leads to a deformation of the solidifying part. In order to describe these phenomena it is suggested to combined three simulation approaches in the present project proposal: (i) a modeling approach which describes growth and sedimentation of crystals, (ii) a modeling approach which describes the mechanical behavior of the sedimented layer (visco-plasticity) and (iii) a modeling approach to describe the thermal contraction of the cast part. Recent developments describe the combined modelling of fluid/gas flow and deformation of solids (FSI: fluid-structure interaction), e.g. gas flow in exhaust pipes. The ideal candidate will investigate even more complicated configurations where the combination of flow with deformations in a solid is not done via a given surface (as in FSI) but through an a priory unknown volume, the two phase mushy zone. Education/Experience Requires a Bachelor/Masters/PhD degree in a relevant subject, e.g. metallurgy, engineering, physics, mathematics, computing; Must have 2 or more years experience with CFD; Experience with programming in OpenFOAM and/or C++ is essential; Needs to demonstrate an interest in scientific programming, e.g. through software projects and published work; Experience in using, assessing and developing computational methods is desirable; Applicants must be fluent in written English and have the ability to publish research papers at international level academic journals. We offer: 3 years position at the Montanuniversitaet Leoben (40 h per week); Postoc: 49.644 EUR per year (gross); Ph.D.: 37.798,60 EUR per year (gross); 25 working days holidays per year; Start on Mai 1st 2016 Please send your application to "info.smmp(at)unileoben.ac.at" ==================================================== Prof. Dr. A. Ludwig Lehrstuhl für Simulation und Modellierung metallurgischer Prozesse / Chair for Simulation and Modelling of Metallurgical Processes Department Metallurgie/ Department of Metallurgy Montanuniversitaet Leoben Franz-Josef-Str. 18 A - 8700 Leoben Österreich / Austria Tel.: +43/3842/402 3101 (secr.) Tel.: +43/3842/402 3100 (direct) Fax: +43/3842/402 3102 lu...@un... http://smmp.unileoben.ac.at/ ==================================================== |