Activity for OpenEEG - EEG hardware and software
-
antem modified a comment on discussion Software Development
NOTE: smxEEGView.exe was added - because i could not find something simpler. Also - don't forget to check 'about' right-top button - it has help!! saveLastEdf in smxEEG.exe(if it is desired to save last samples) must be clicked before starting(Connect). That 'last.edf' can be then viewed with smxEEGView or any other eegViewer. NOTE2: i use 4active and 1 passive electrode - but because for some reason passive electrode did not work as expected - i use regular 3.5mm jack audio cable for that - using...
-
NOTE: smxEEGView.exe was added - because i could not find something simpler. Also - don't forget to check 'about' right-top button - it has help!! saveLastEdf in smxEEG.exe(if it is desired to save last samples) must be clicked before starting(Connect). That 'last.edf' can be then viewed with smxEEGView or any other eegViewer. NOTE2: i use 4active and 1 passive electrode - but because for some reason passive electrode did not work as expected - i use regular 3.5mm jack audio cable for that - using...
-
NOTE: smxEEGView.exe was added - because i could not find something simpler. Also - don't forget to check 'about' right-top button - it has help!! saveLastEdf in smxEEG.exe(if it is desired to save last samples) must be clicked before starting(Connect). That 'last.edf' can be then viewed with smxEEGView or any other eegViewer. NOTE2: i use 4active and 1 passive electrode - but because for some reason passive electrode did not work as expected - i use regular 3.5mm jack audio cable for that - using...
-
NOTE: smxEEGView.exe was added - because i could not find something simpler. Also - don't forget to check 'about' right-top button - it has help!! saveLastEdf in smxEEG.exe(if it is desired to save last samples) must be clicked before starting(Connect). That 'last.edf' can be then viewed with smxEEGView or any other eegViewer. NOTE2: i use 4active and 1 passive electrode - but because for some reason passive electrode did not work as expected - i use regular 3.5mm jack audio cable for that - using...
-
NOTE: smxEEGView.exe was added - because i could not find something simpler. Also - don't forget to check 'about' right-top button - it has help!! saveLastEdf in smxEEG.exe(if it is desired to save last samples) must be clicked before starting(Connect). That 'last.edf' can be then viewed with smxEEGView or any other eegViewer. It can be downloaded from site from previous comment - dload(as download). Just unzip it with totalCommander(or 7zip) in some writable!! folder. (you can check that it's writable...
-
NOTE: smxEEGView.exe was added - because i could not find something simpler. Also - don't forget to check 'about' right-top button - it has help!! saveLastEdf in smxEEG.exe(if it is desired to save last samples) must be clicked before starting(Connect). That 'last.edf' can be then viewed with smxEEGView or any other eegViewer. It can be downloaded from site from previous comment - dload(as download). Just unzip it with totalCommander(or 7zip) in some writable!! folder. (you can check that it's writable...
-
NOTE: smxEEGView.exe was added - because i could not find something simpler. Also - don't forget to check 'about' right-top button - it has help!! saveLastEdf in smxEEG.exe(if it is desired to save last samples) must be clicked before starting(Connect). That 'last.edf' can be then viewed with smxEEGView or any other eegViewer. It can be downloaded from site from previous comment - dload(as download). Just unzip it with totalCommander(or 7zip) in some writable!! folder. (you can check that it's writable...
-
NOTE: smxEEGView.exe was added - because i could not find something simpler. Also - don't forget to check 'about' right-top button - it has help!! saveLastEdf in smxEEG.exe(if it is desired to save last samples) must be clicked before starting(Connect). That 'last.edf' can be then viewed with smxEEGView or any other eegViewer. It can be downloaded from site from previous comment - dload(as download). Just unzip it with totalCommander(or 7zip) in some writable!! folder. (you can check that it's writable...
-
Alex C modified a comment on discussion Software Development
Hi, I am new here and I would like to ask how to download and test this smxEEG. It seems really good. In the previous link I only can view. Thanks a lot.
-
Hi, I am new here and I would like to ask how to download and test this smxEEG. It seems really good. Thanks a lot.
-
Hi, I am new here and I would like to ask how to download and test this smsEEG. It seems really good. Thanks a lot.
-
Updated version: * continous wave works fine now * freq domain - added select/view 1st/2nd ch * full underlying edf refactoring - 'saveLastEdf' works now, you can view it with eg SigViewer or similar. It can be downloaded here.
-
Ok, new version of this program >> This works as expected - since docs don't say how exactly P2 works. Freq domain added - you can check it here. Only windows version(continous wave has a bug with my gfxCard - blinking), altough works ok with experimental linux version(not available yet to download). If someone reading this has access to 'Software' list, upper link can be of course added. Later i will probably post some more pictures(eyeBlink,etc) - since now i only waved at eeg which screenshots...
-
Ok, new version of this program >> This works as expected - since docs don't say how exactly P2 works. Freq domain added - you can check it here. Only windows version(continous wave has a bug with my gfxCard - blinking), altough works ok with experimental linux version(not available yet to download). If someone reading this has access to 'Software' list, upper link can be of course added. Later i will probably post some more pictures(eyeBlink,etc) - since now i only waved at eeg which screenshots...
-
Ok, new version of this program >> This works as expected - since docs don't say how exactly P2 works. Freq domain added - you can check it here. Only windows version(continous wave has a bug with my gfxCard - blinking), altough works ok with experimental linux version(not available yet to download).
-
Oskar Buksa posted a comment on discussion Software Development
It worked perfectly, thank you.
-
Alexander Houston posted a comment on discussion Software Development
Hi Oskar, Here's an updated link: https://discord.gg/ke2d8z5REA I'm not sure why the last link expired! Please do let me know if you have any trouble with this one. Best, Alex On Sun, Feb 4, 2024 at 5:29 PM Oskar Buksa thesushi321@users.sourceforge.net wrote: The link is dead unfortunately. Are there any active members anymore? Discord server for discussion https://sourceforge.net/p/openeeg/discussion/344387/thread/d071b46844/?limit=25#5eae Sent from sourceforge.net because you indicated interest...
-
I created a discord to centralize information a bit. Join here: https://discord.gg/ke2d8z5REA edit: hopefully this link is permanent!
-
Here you go: https://discord.gg/ke2d8z5REA
-
The link is dead unfortunately. Are there any active members anymore?
-
I created a discord to centralize information a bit. Join here: https://discord.gg/bHjwqTbW edit: hopefully this link is permanent!
-
I created a discord to centralize information a bit. Join here: https://discord.gg/78ahqhTe
-
smxEEG updated: +program did not use stored vertical scale factor at startup +about section updated If you download this(same web page as in original post) and you get old version(new=31.1.2019), i suggest that you clear your browser cache. @Pedro Silva: At the moment no, information can not be sended anywhere(neither stored), i don't know if it can be by openVibe. Also, this software is not created to be used for deliberate negative mind programming in any way, directly or indirectly(yap, hearing...
-
Pedro Silva posted a comment on discussion Software Development
Hello, I'm developing a game in unity that read eeg data. I want to buy the EEG///SMT from o_l_i_m_e_x that you developed this program. Can I send the information from your software to Unity? It is possible to do that with openVibe, do you know if I can send it to openVibe? Thank you
-
Voila, i created a simple software for modular smt/eeg(latest from o_l_i_m_e_x). It plots raw signals, no fft, no filtering, etc, although channels can be zoomed. If there are any bugs there, write to mail in the 'About' section in the program. I will add screenshots in the future to down website, from which software can be downloaded(try later if site is not accessible instantly): linux/win x32 binaries
-
Voila, i created a simple software for modular smt/eeg(latest from o_l_i_m_e_x). It plots raw signals, no fft, no filtering, etc, although channels can be zoomed. If there are any bugs there, write to mail in the 'About' section in program. I will add screenshots in the future to down website, from which software can be downloaded(try later if site is not accessible instantly): linux/win x32 binaries
-
Thiago Lucas de Oliveira posted a comment on discussion Software Development
Hi everybody, I'm new here, I would like to ask some questions. Sorry, in advance,...
-
maulik patel posted a comment on ticket #5
Hi, I am confused about electrodes connection which is common and DRL circuit .I...
-
mr maulik
-
mr maulik
-
mr maulik
-
OpenEEG - EEG hardware and software released /OldFiles/BioMon-0.0.3.tar.gz
-
-
-
-
-
-
-
-
-
-
-
-
1
