Menu
▾
▴
Re: [Openbts-discuss] (no subject)
|
From: Christophe B. <cb...@gl...> - 2016-05-23 18:28:19
|
Hi, You have to check your dialplan. Please add this extention in your dial plan, or include the file including this extension in the file extension-custom.conf : exten => 2600, 1,Set(CDR(hangupdirection)=A) same => n,Answer() same => n,Echo() same => n,Set(CDR(hangupdirection)=SYSTEM) same => n,Hangup(16) Regards, -- Christophe Boutin GLOBALTEL - Votre opérateur mobile à Saint-Pierre & Miquelon Standard:0508400000 Gsm: 0508400001 Email: cb...@gl... Web: www.globaltel-spm.com 2016-05-23 10:43 GMT-02:00 Anuja Kokil <anu...@gm...>: > Hello, > > My cellphones are registering to network successfully,now I am able to > make test sms,Direct sms, and two party sms. but during making test call or > echo call asterisk CLI is showing following Notice > > [May 23 17:57:23] NOTICE[3069][C-00000000]: chan_sip.c:25450 > handle_request_invite: Call from '' (127.0.0.1:5062) to extension '2600' > rejected because extension not found in context 'default'. > [May 23 17:57:59] WARNING[3069]: chan_sip.c:4175 retrans_pkt: > Retransmission timeout reached on transmission 1247805829@127.0.0.1 for > seqno 204 (Critical Response) -- See > https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions > Packet timed out after 31999ms with no response > > I am unable to make calls,Please help me regarding the same. > > > Best Regards > Anuja > > > > > > > > > > > > > > On Tue, May 17, 2016 at 5:02 PM, Anuja Kokil <anu...@gm...> wrote: > >> Hi >> >> Actually, after getting IMSI successfully, i reconfigured LUR with .* , >> and immediately my cell phone get connected to the network. i tried Direct >> SMS and Echo SMS, it was successful attempt, Thank you so much for your >> immediate response, It helped me lot today. >> >> Now trying to make test call to 2602 ,but it is immediately rejecting >> call connection, >> >> in Asterisk terminal i am getting >> >> >> [May 17 16:32:09] NOTICE[31257][C-0000000c]: chan_sip.c:25450 >> handle_request_invite: Call from '' (127.0.0.1:5062) to extension '2602' >> rejected because extension not found in context 'default'. >> [May 17 16:32:27] WARNING[31257]: chan_sip.c:4175 retrans_pkt: >> Retransmission timeout reached on transmission 1105886678@127.0.0.1 for >> seqno 397 (Critical Response) -- See >> https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions >> Packet timed out after 31998ms with no response >> == Using SIP RTP CoS mark 5 >> >> Thankyou >> Anuja >> >> On Tue, May 17, 2016 at 1:41 PM, Anuja Kokil <anu...@gm...> >> wrote: >> >>> I am using Log Periodic antenna (850-6500MHz) >>> ,is it the issue that my phone is not connecting? >>> >>> Thanks >>> Anuja >>> >>> On Tue, May 17, 2016 at 1:39 PM, Anuja Kokil <anu...@gm...> >>> wrote: >>> >>>> Hello Alex, >>>> >>>> Thank you so much for your reply!! I am able to see IMSI in TMSI table >>>> now! but still my phone is not connecting to network. >>>> >>>> I tried installing OsmoTRX using following commands >>>> >>>> $ git clone git://git.osmocom.org/osmo-trx >>>> >>>> $ autoreconf -i >>>> >>>> $ ./configure >>>> $ make >>>> $ sudo make install >>>> $ osmo-trx -f >>>> >>>> after last command my transceiver enables >>>> >>>> In OpenBTS CLI it gives >>>> OpenBTS> noise >>>> noise RSSI is --2147483648 dB wrt full scale >>>> MS RSSI target is -50 dB wrt full scale >>>> >>>> OpenBTS> version >>>> release TRUNK+GPRS P built May 16 2016 rev8925M >>>> >>>> OpenBTS> power >>>> current downlink power -1 dB wrt full scale >>>> current attenuation bounds 0 to 10 dB >>>> >>>> OpenBTS> tmsis >>>> TMSI IMSI age used >>>> 1 001010000000003 6m 6m >>>> >>>> but in OsmoTRX terminal i am getting >>>> WARNING 3032677184 13:31:00.0 Transceiver.cpp:674:pullRadioVector: >>>> Clipping detected on received RACH or Normal Burst >>>> WARNING 3032677184 13:31:00.0 Transceiver.cpp:674:pullRadioVector: >>>> Clipping detected on received RACH or Normal Burst >>>> >>>> and still my phone is not registering to network >>>> It is showing same message! >>>> >>>> Thanks & Regards >>>> Anuja >>>> >>>> >>>> >>>> >>>> >>>> On Tue, May 17, 2016 at 11:42 AM, Anuja Kokil <anu...@gm...> >>>> wrote: >>>> >>>>> Hello, >>>>> >>>>> I am new to this technology, I am working on B200 USRP and following >>>>> the document "Getting Started with OpenBTS".I have reached up to Network >>>>> creation. My mobile is showing network 'Test PLMN 1-1' .I have two SIM >>>>> cards with MCC-001 and MNC-01. I am using Sony Xperia M mobile phone. My >>>>> laptop is HP PC with intel core i5. >>>>> >>>>> The problem is, when i try to register to the network with my phone, >>>>> it is not connecting and displaying the message "can't connect now,try >>>>> again later", >>>>> >>>>> when i give the command tmsis- then it is showing empty TMSI table. >>>>> >>>>> I have configured Control.LUR.OpenRegistration to .* ,but still phone >>>>> not registering to network. >>>>> >>>>> I am really not getting what is the problem,whether B200 is not >>>>> compatible with OpenBTS? I read about external 10 MHz reference,is it >>>>> necessity? if yes then i am not getting how to connect external reference >>>>> with it? >>>>> Is any Daughter Board required to connect with B200? >>>>> Which USRP is better for Openbts N200 or B200? >>>>> >>>>> Please help me regarding the same. >>>>> >>>>> Thanks & Regards >>>>> Anuja >>>>> >>>>> >>>>> ------------------------------------------------------------------------------ >>>>> Mobile security can be enabling, not merely restricting. Employees who >>>>> bring their own devices (BYOD) to work are irked by the imposition of >>>>> MDM >>>>> restrictions. Mobile Device Manager Plus allows you to control only the >>>>> apps on BYO-devices by containerizing them, leaving personal data >>>>> untouched! >>>>> https://ad.doubleclick.net/ddm/clk/304595813;131938128;j >>>>> _______________________________________________ >>>>> Openbts-discuss mailing list >>>>> Ope...@li... >>>>> https://lists.sourceforge.net/lists/listinfo/openbts-discuss >>>>> >>>>> >>>> >>> >> > > > ------------------------------------------------------------------------------ > Mobile security can be enabling, not merely restricting. Employees who > bring their own devices (BYOD) to work are irked by the imposition of MDM > restrictions. Mobile Device Manager Plus allows you to control only the > apps on BYO-devices by containerizing them, leaving personal data > untouched! > https://ad.doubleclick.net/ddm/clk/304595813;131938128;j > _______________________________________________ > Openbts-discuss mailing list > Ope...@li... > https://lists.sourceforge.net/lists/listinfo/openbts-discuss > > |
