Re: [Openbts-discuss] Provisioning a Single IMSI - OpenBTS

[Amber a. S. <amb...@ho...>]

Yes I have double checked, both openRegisteration and db.
By doing unconfig Control.LUR.OpenRegistration, the parameter is 
shown as disabled, users show up in TMSI table with AUTH field=0 , but 
still they can receive sms sent by sendsms command from OpenBTS to their
 IMSI and can call other asterisk users.
Is there any other parameter needed to be changed for disabling open registration?
Please let us know is there any cache that is still keeping it authenticated even after deletion from
 subscriber registry? Is there any timer that is controlling the 
registration time? Please help us, how to fix this?

Regards,
Amber & Sarosh


From: art...@gm...
Date: Tue, 24 Feb 2015 15:14:50 +0000
Subject: Re: [Openbts-discuss] Provisioning a Single IMSI - OpenBTS
To: amb...@ho...

Are you sure you have not let OpenRegistration enabled. Cause this should not happen.I just tested registering my work phone on the network and it just won't.

Check what you have in your db by nmcli.py sipauthserve subscribers read.

Le Tue Feb 24 2015 at 16:11:12, Amber and Sarosh <amb...@ho...> a écrit :
Thanks for guidance.
But they can call other asterisk users and receive messages through sendsms.
If they do so, how can we know that they are not registered. Is there any method to check this? Are'nt they still able to use resources (call and sms)?

We really appreciate your continuous help.

Regards,
Sarosh

Arthur Rabaté <art...@gm...> wrote:

I am not actually using the sendsms command.
I believe a phone can register to the network without being into nmcli. Therefore you can sendsms to these but those phones cannot do anything else.
Le mar. 24 févr. 2015 à 11:59, Amber and Sarosh <amb...@ho...> a écrit :



We are waiting for your kind reply.

Regards,
Amber & Sarosh


Date: Sat, 21 Feb 2015 10:01:57 +0500
Subject: Re: [Openbts-discuss] Provisioning a Single IMSI - OpenBTS
From: amb...@ho...
To: art...@gm...

Thank you for your continued help. We have almost reached there but still need your kind help in a few issues we are facing.
We have tested creating users using nmcli and it works fine. But now the issue is that it works fine at times and sometimes not.
e.g. We create a subscriber with IMSIxxx using nmcli and then use sendsms command of OpenBTS to send an sms to IMSIxxx, and it receives message , when deleted from subscribers using nmcli it doesn't receive any message sent by sendsems command. Thats fine. But after a few minutes or few restarts it again start reciveing messages sent from sendsms command despite of the fact that it is now deleted from subscriber list. Overall, this process  is somehow random.

Please let us know is there any cache that is limiting its deletion from subscriber registery? Is there any timer that is controlling the registration time? Please help us, how to fix this?

Thanks & Regards,
Naheed, Amber & Sarosh
Regards,
Amber& Sarosh

Arthur Rabaté <art...@gm...> wrote:

You do not have to build OpenBTS after nmcli.
nmcli is dynamic and you can even use nmcli while openbts is running.

Try config Control.LUR.OpenRegistration 0 ?
No changes are required anywhere else but nmcli (and OpenBTS for disabling OpenReg)
Users might register into the network, but they only receive a sms (registration rejected)and can't do anything (that will not use any resources).
Le Tue Feb 17 2015 at 10:51:35, Amber and Sarosh <amb...@ho...> a écrit :



Thank you for your help.
This is exactly what I want to achieve but unable to do .
I have created entry of my IMSI using nmcli successfully and  disabled OpenRegistration, but still other users are registering. Somehow OpenRegistration is not disabled by running unconfig  Control.LUR.OpenRegistration in version 5 CLI that I am running. Is there any other parameter that is required to be changed in order to disable this.
Also, please let me know that whether the ./nmcli works dynamically or we have to compile openbts again after creating entries in this.Please let me know if some other changes are required to register this IMSI i.e. changes in sip.conf or any config parameter of OpenBTS too inaddition to running nmcli?

Regards,
Amber & Sarosh
From: art...@gm...
Date: Mon, 16 Feb 2015 11:29:41 +0000
Subject: Re: [Openbts-discuss] Provisioning a Single IMSI - OpenBTS
To: amb...@ho...; ope...@li...
CC: nah...@nr...,

You can use nmcli (in openbts/NodeManager) to register your sim using the imsi 
./nmcli.py sipauthserve subscribers create "nameofthephone" IMSItheimsi Ki
IMSItheimsi example : IMSI33009000005001
Ki is optional.
Then disable OpenRegistration.
Only this registered imsi should be able to register to your network.
Kind Regards,
Arthur



Le Mon Feb 16 2015 at 07:14:43, Amber and Sarosh <amb...@ho...> a écrit :
<blockquote style="border-left:1px #c