Re: [Openbts-discuss] OpenBTS-UMTS Running ALERT

[Ahmad Z. <ahm...@gm...>]

I was update UHD
With result
root@zai:/usr/local/src/openbts-umts# uhd_usrp_probe
linux; GNU C++ version 4.6.3; Boost_104601; UHD_003.008.002-86-g566dbc2b

-- Opening a USRP2/N-Series device...
-- Current recv frame size: 1472 bytes
-- Current send frame size: 1472 bytes
  _____________________________________________________
 /
|       Device: USRP2 / N-Series Device
|     _____________________________________________________
|    /
|   |       Mboard: N210r4
|   |   hardware: 2577
|   |   mac-addr: a0:36:fa:38:32:57
|   |   ip-addr: 192.168.10.3
|   |   subnet: 255.255.255.255
|   |   gateway: 255.255.255.255
|   |   gpsdo: none
|   |   serial: E5R22N8UP
|   |   FW Version: 12.4
|   |   FPGA Version: 10.1
|   |
|   |   Time sources: none, external, _external_, mimo
|   |   Clock sources: internal, external, mimo
|   |   Sensors: mimo_locked, ref_locked
|   |     _____________________________________________________
|   |    /
|   |   |       RX DSP: 0
|   |   |   Freq range: -50.000 to 50.000 MHz
|   |     _____________________________________________________
|   |    /
|   |   |       RX DSP: 1
|   |   |   Freq range: -50.000 to 50.000 MHz
|   |     _____________________________________________________
|   |    /
|   |   |       RX Dboard: A
|   |   |   ID: RFX900 (0x0025)
|   |   |   Serial: EFR11WCR8
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       RX Frontend: 0
|   |   |   |   Name: RFX900 RX
|   |   |   |   Antennas: TX/RX, RX2, CAL
|   |   |   |   Sensors: lo_locked
|   |   |   |   Freq range: 750.000 to 1050.000 MHz
|   |   |   |   Gain range PGA0: 0.0 to 70.0 step 0.0 dB
|   |   |   |   Connection Type: QI
|   |   |   |   Uses LO offset: No
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       RX Codec: A
|   |   |   |   Name: ads62p44
|   |   |   |   Gain range digital: 0.0 to 6.0 step 0.5 dB
|   |   |   |   Gain range fine: 0.0 to 0.5 step 0.1 dB
|   |     _____________________________________________________
|   |    /
|   |   |       TX DSP: 0
|   |   |   Freq range: -50.000 to 50.000 MHz
|   |     _____________________________________________________
|   |    /
|   |   |       TX Dboard: A
|   |   |   ID: RFX900 (0x0029)
|   |   |   Serial: EFR11WCR8
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       TX Frontend: 0
|   |   |   |   Name: RFX900 TX
|   |   |   |   Antennas: TX/RX, CAL
|   |   |   |   Sensors: lo_locked
|   |   |   |   Freq range: 750.000 to 1050.000 MHz
|   |   |   |   Gain Elements: None
|   |   |   |   Connection Type: IQ
|   |   |   |   Uses LO offset: Yes
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       TX Codec: A
|   |   |   |   Name: ad9777
|   |   |   |   Gain Elements: None


I use openbts-umts which support UHD driver
I get from https://github.com/ttsou/openbts-umts.git

But addition git submodule update still fail
root@zai:/usr/local/src/openbts-umts# git submodule init
Submodule 'NodeManager' () registered for path 'NodeManager'
root@zai:/usr/local/src/openbts-umts# git submodule update
fatal: Needed a single revision
Unable to find current revision in submodule path 'NodeManager'

Any idea?
Thanks,

Zai

2015-02-23 21:34 GMT+07:00 Arthur Rabaté <art...@gm...>:

> Sorry, in OpenBTS-UMTS, it is located into TransceiverUHD.
>
> I would strongly advise you to update your UHD/Gnuradio config (even if
> gnuradio is not needed for openbts)
>
> Just use this line, as a standard user (not in root). It will ask for your
> root password when needed.
>
> wget http://www.sbrac.org/files/build-gnuradio && chmod a+x ./build-gnuradio && ./build-gnuradio
>
>
>
>
> Le Mon Feb 23 2015 at 15:11:29, Ahmad Zainudin <ahm...@gm...>
> a écrit :
>
> Thanks Arthur,
>> The result uhd_usrp_probe
>> root@zai:/usr/local/src# uhd_usrp_probe
>> linux; GNU C++ version 4.6.3; Boost_104601; UHD_003.005.004-140-gfb32ed16
>>
>> -- Opening a USRP2/N-Series device...
>> -- Current recv frame size: 1472 bytes
>> -- Current send frame size: 1472 bytes
>> -- Detecting internal GPSDO.... not found
>>   _____________________________________________________
>>  /
>> |       Device: USRP2 / N-Series Device
>> |     _____________________________________________________
>> |    /
>> |   |       Mboard: N210r4
>> |   |   hardware: 2577
>> |   |   mac-addr: a0:36:fa:38:32:57
>> |   |   ip-addr: 192.168.10.3
>> |   |   subnet: 255.255.255.255
>> |   |   gateway: 255.255.255.255
>> |   |   gpsdo: none
>> |   |   serial: E5R22N8UP
>> |   |   FW Version: 12.4
>> |   |   FPGA Version: 10.1
>> |   |
>> |   |   Time sources: none, external, _external_, mimo
>> |   |   Clock sources: internal, external, mimo
>> |   |   Sensors: mimo_locked, ref_locked
>> |   |     _____________________________________________________
>> |   |    /
>> |   |   |       RX DSP: 0
>> |   |   |   Freq range: -50.000 to 50.000 Mhz
>> |   |     _____________________________________________________
>> |   |    /
>> |   |   |       RX DSP: 1
>> |   |   |   Freq range: -50.000 to 50.000 Mhz
>> |   |     _____________________________________________________
>> |   |    /
>> |   |   |       RX Dboard: A
>> |   |   |   ID: RFX900 (0x0025)
>> |   |   |   Serial: EFR11WCR8
>> |   |   |     _____________________________________________________
>> |   |   |    /
>> |   |   |   |       RX Frontend: 0
>> |   |   |   |   Name: RFX900 RX
>> |   |   |   |   Antennas: TX/RX, RX2, CAL
>> |   |   |   |   Sensors: lo_locked
>> |   |   |   |   Freq range: 750.000 to 1050.000 Mhz
>> |   |   |   |   Gain range PGA0: 0.0 to 70.0 step 0.0 dB
>> |   |   |   |   Connection Type: QI
>> |   |   |   |   Uses LO offset: No
>> |   |   |     _____________________________________________________
>> |   |   |    /
>> |   |   |   |       RX Codec: A
>> |   |   |   |   Name: ads62p44
>> |   |   |   |   Gain range digital: 0.0 to 6.0 step 0.5 dB
>> |   |   |   |   Gain range fine: 0.0 to 0.5 step 0.1 dB
>> |   |     _____________________________________________________
>> |   |    /
>> |   |   |       TX DSP: 0
>> |   |   |   Freq range: -250.000 to 250.000 Mhz
>> |   |     _____________________________________________________
>> |   |    /
>> |   |   |       TX Dboard: A
>> |   |   |   ID: RFX900 (0x0029)
>> |   |   |   Serial: EFR11WCR8
>> |   |   |     _____________________________________________________
>> |   |   |    /
>> |   |   |   |       TX Frontend: 0
>> |   |   |   |   Name: RFX900 TX
>> |   |   |   |   Antennas: TX/RX, CAL
>> |   |   |   |   Sensors: lo_locked
>> |   |   |   |   Freq range: 750.000 to 1050.000 Mhz
>> |   |   |   |   Gain Elements: None
>> |   |   |   |   Connection Type: IQ
>> |   |   |   |   Uses LO offset: Yes
>> |   |   |     _____________________________________________________
>> |   |   |    /
>> |   |   |   |       TX Codec: A
>> |   |   |   |   Name: ad9777
>> |   |   |   |   Gain Elements: None
>>
>>
>> How to get tranceiver52M uhd driven for OpenBTS-UMTS?
>>
>> Thanks,
>>
>> 2015-02-23 21:06 GMT+07:00 Arthur Rabaté <art...@gm...>:
>>
>>> The transceiver RAD1 is for Range Networks hardware only.
>>> You need the transceiver from Transceiver52M (it is the transceiver for
>>> anything uhd driven)
>>>
>>> Check your connectivity with uhd_usrp_probe, it should find your device.
>>>
>>>
>>>
>>
>>
>> --
>> Ahmad Zainudin
>> Lab. Digital Signal Processing E-206
>> Politeknik Elektronika Negeri Surabaya
>> Kampus PENS, Sukolilo, Surabaya 60111
>> Mobile : 085733409869 / ext. 2504
>>
>


-- 
Ahmad Zainudin
Lab. Digital Signal Processing E-206
Politeknik Elektronika Negeri Surabaya
Kampus PENS, Sukolilo, Surabaya 60111
Mobile : 085733409869 / ext. 2504