Revision: 618
http://openautomation.svn.sourceforge.net/openautomation/?rev=618&view=rev
Author: mayerch
Date: 2011-12-31 14:53:57 +0000 (Sat, 31 Dec 2011)
Log Message:
-----------
Nicer format of the help string
Modified Paths:
--------------
tools/russconnectd/trunk/src/main.c
Modified: tools/russconnectd/trunk/src/main.c
===================================================================
--- tools/russconnectd/trunk/src/main.c 2011-12-30 21:35:32 UTC (rev 617)
+++ tools/russconnectd/trunk/src/main.c 2011-12-31 14:53:57 UTC (rev 618)
@@ -38,7 +38,16 @@
#define DEBUG 1
#define DAEMON_NAME "russconnectd"
-#define USAGESTRING "\n\t-d\tRun as daemon/No debug output\n\t-p <pidfile>\tPID-filename\n\t-i <ip:port>\tIP-Address:Port to send UDP-packets to russound\n\t-l <UDP-port>\tUDP port to listen on\n\t-a <KNX address>\tKNX start-address (see README)\n\t-z <number>\tNumber of Zones to support\n\t-u <eib url>\tURL to conatct eibd like localo:/tmp/eib or ip:192.168.0.101\n\t-s\t(Optional) send all values to KNX on startup of daemon\n\t-k 0x71\t(Optional) Keypad ID - defaults to 0x70 for CAx - use 0x71 for C5"
+#define USAGESTRING "\n"\
+ "\t-d Run as daemon/No debug output\n"\
+ "\t-p <pidfile> PID-filename\n"\
+ "\t-i <ip:port> IP-Address:Port to send UDP-packets to russound\n"\
+ "\t-l <UDP-port> UDP port to listen on\n"\
+ "\t-a <KNX address> KNX start-address (see README)\n"\
+ "\t-z <number> Number of Zones to support\n"\
+ "\t-u <eib url> URL to conatct eibd like localo:/tmp/eib or ip:192.168.0.101\n"\
+ "\t-s (Optional) send all values to KNX on startup of daemon\n"\
+ "\t-k 0x71 (Optional) Keypad ID - defaults to 0x70 for CAx - use 0x71 for C5\n"
#define NUM_THREADS 3
#define MAX_ZONES 31
#define RETRY_TIME 5
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
