openautomation-svn

[Openautomation-svn] SF.net SVN: openautomation:[460] tools/russconnectd

[<ma...@us...>]

Revision: 460
          http://openautomation.svn.sourceforge.net/openautomation/?rev=460&view=rev
Author:   makki1
Date:     2011-10-20 23:41:50 +0000 (Thu, 20 Oct 2011)
Log Message:
-----------
prepared autoconf-option without-eib; added keypad-id for C5; fixed sendOnStartUp; withdraw .tar.gz - this will go under sf/oa../files; Note: OpenWRT-Makefile will also be withdrawn here once settled&committed to upstream

Modified Paths:
--------------
    tools/russconnectd/trunk/README
    tools/russconnectd/trunk/configure.ac
    tools/russconnectd/trunk/debian/changelog
    tools/russconnectd/trunk/debian/files
    tools/russconnectd/trunk/src/main.c

Removed Paths:
-------------
    tools/russconnectd/release/

Modified: tools/russconnectd/trunk/README
===================================================================
--- tools/russconnectd/trunk/README	2011-10-20 23:12:13 UTC (rev 459)
+++ tools/russconnectd/trunk/README	2011-10-20 23:41:50 UTC (rev 460)
@@ -1,14 +1,16 @@
 *** Russound RNET(R) to EIB/KNX bridge
 
 - eibd is needed for KNX communication, either locally or remote
+(subject to get optional when TCP-Server/lirc-interface is implemented)
 - uses mainly native Russound-Values
-TODO: document various values for Volume, bass,.. better
 - controllers and zone-numbers are zero based!
 - use socat or Moxa to get serial-data from/to UDP:
 	19200 8N1, No flowctrl, no special stop chars needed
 
 *** INSTALL
-- needs pthread and libeibclient from bcusdk/eibd
+- needs pthread and libeibclient from bcusdk/eibd, but autotools etc. should 
+work for release.tar.gz with
+./configure; make; make install
 	
 *** Group address structure:
 - given a start-address the next 256 GA are used per 6 Zones, currently pretty hardcoded
@@ -19,23 +21,20 @@
 10/1/2 WO Actuator powering the controllers (not yet)
 
 10/1/10 W Zone 1 Power on/off 0/1
-... see .ods
+... -> see ga_list.ods for an example
 
-W = GA writeable
-RS = GA readable/sends status updates on change
-
 *** TODO:
 - see various TODO/FIXME in source
 - reconnection/error-handling if network-problems occur (mainly eibd?)
-- prettify code / split main.c
-- fix dependency on uclibc++ (?) in OpenWRT Makefile
-- change russ UDP-socket to be shared for send/receive with listening (-l) sourceport for outgoing
-    (makes usage with socat udp-recvfrom easier)
+- prettify code / split up main.c
+- fix dependency on uclibcxx (!?) in OpenWRT Makefile
 - supply examples for socat
 - directly connect serialport
 
 *** Outlook
 - *maybe* make much more modular and other interfaces (simple UDP/TCP server like C0 Z1 VolUp?)
 -> implement RIO protocal partially
+-> connect to lirc directly?
 - don't depend on libeibclient then
 - *maybe* add outgoing interfaces for KNX-> mpd,vdr,.. to stick multiroom togehter
+- add at least a KNX-address to switch on/off to avoid ext. logic here

Modified: tools/russconnectd/trunk/configure.ac
===================================================================
--- tools/russconnectd/trunk/configure.ac	2011-10-20 23:12:13 UTC (rev 459)
+++ tools/russconnectd/trunk/configure.ac	2011-10-20 23:41:50 UTC (rev 460)
@@ -27,10 +27,13 @@
 AM_PROG_LIBTOOL
 
 
+dnl **********
+dnl with ....
+dnl ''''''''''
+AC_ARG_WITH(eib,  [  --without-eib       build without EIB/KNX support])
+dnl not yet..
 
 
-
-
 AC_OUTPUT([
 Makefile
 src/Makefile

Modified: tools/russconnectd/trunk/debian/changelog
===================================================================
--- tools/russconnectd/trunk/debian/changelog	2011-10-20 23:12:13 UTC (rev 459)
+++ tools/russconnectd/trunk/debian/changelog	2011-10-20 23:41:50 UTC (rev 460)
@@ -1,3 +1,9 @@
+russconnectd (0.2-ubuntu1) oneiric; urgency=low
+
+  * new upstream
+
+ -- Michael Markstaller <de...@wi...>  Wed, 19 Oct 2011 20:36:42 +0200
+
 russconnectd (0.1) unstable; urgency=low
 
   * Initial Release.

Modified: tools/russconnectd/trunk/debian/files
===================================================================
--- tools/russconnectd/trunk/debian/files	2011-10-20 23:12:13 UTC (rev 459)
+++ tools/russconnectd/trunk/debian/files	2011-10-20 23:41:50 UTC (rev 460)
@@ -1 +1 @@
-russconnectd_0.1_i386.deb unknown extra
+russconnectd_0.2-ubuntu1_i386.deb unknown extra

Modified: tools/russconnectd/trunk/src/main.c
===================================================================
--- tools/russconnectd/trunk/src/main.c	2011-10-20 23:12:13 UTC (rev 459)
+++ tools/russconnectd/trunk/src/main.c	2011-10-20 23:41:50 UTC (rev 460)
@@ -26,7 +26,7 @@
 #include <syslog.h>
 #include <string.h>
 #include <signal.h>
-#include <assert.h>
+//#include <assert.h>
 
 #include <arpa/inet.h>
 #include <netinet/in.h>
@@ -38,14 +38,13 @@
 
 #define DEBUG 1
 #define DAEMON_NAME "russconnectd"
-#define USAGESTRING "\n\t-d\tRun as daemon/No debug output\n\t-p <pidfile>\tPID-filename\n\t-i <ip:port>\tIP-Address:Port to send UDP-packets to russound\n\t-l <UDP-port>\tUDP port to listen on\n\t-a <KNX address>\tKNX start-address (see README)\n\t-z <number>\tNumber of Zones to support\n\t-u <eib url>\tURL to conatct eibd like localo:/tmp/eib or ip:192.168.0.101\n\t-s\t(Optional) send all values to KNX on startup of daemon\n"
-#define NUM_THREADS 2
+#define USAGESTRING "\n\t-d\tRun as daemon/No debug output\n\t-p <pidfile>\tPID-filename\n\t-i <ip:port>\tIP-Address:Port to send UDP-packets to russound\n\t-l <UDP-port>\tUDP port to listen on\n\t-a <KNX address>\tKNX start-address (see README)\n\t-z <number>\tNumber of Zones to support\n\t-u <eib url>\tURL to conatct eibd like localo:/tmp/eib or ip:192.168.0.101\n\t-s\t(Optional) send all values to KNX on startup of daemon\n\t-k 0x71\t(Optional) Keypad ID - defaults to 0x70 for CAx - use 0x71 for C5"
+#define NUM_THREADS 3
 #define MAX_ZONES 31
 #define RETRY_TIME 5
 #define BUFLEN 1024
 #define POLLING_INTERVAL 10
 #define ZONES_PER_CONTROLLER 6
-#define RUSS_KEYPAD_ID 0x70
 
 pthread_mutex_t zonelock = PTHREAD_MUTEX_INITIALIZER; 
 pthread_mutex_t initlock = PTHREAD_MUTEX_INITIALIZER; 
@@ -81,6 +80,7 @@
 int pidFilehandle;
 char *pidfilename = "/var/run/russconnectd.pid";
 int sendOnStart = 0;
+long int keypadid = 0x70;
 
 //FIXME: also handle serial-port directly?
 struct sockaddr_in si_me, si_other;
@@ -140,7 +140,7 @@
 void *sendrussPolling(unsigned char zone) {
 	syslog(LOG_DEBUG, "polling zone %d",zone);
 	pthread_mutex_trylock(&standbylock);
-	char buf_onvol[25] = { 0xF0, 0, 0, 0x7F, 0, 0, RUSS_KEYPAD_ID, 0x01, 0x05, 0x02, 0, 0, 0, 0x04, 0, 0, 0, 0xF7 };
+	char buf_onvol[25] = { 0xF0, 0, 0, 0x7F, 0, 0, keypadid, 0x01, 0x05, 0x02, 0, 0, 0, 0x04, 0, 0, 0, 0xF7 };
 	buf_onvol[1] = zone/ZONES_PER_CONTROLLER;
 	buf_onvol[11] = zone%ZONES_PER_CONTROLLER;
 	buf_onvol[16] = (int) russChecksum (buf_onvol,18-2);
@@ -148,7 +148,7 @@
 		syslog(LOG_WARNING,"sendto failed!");
 	usleep(20*1000); //FIXME: throttle a little (20ms)
 
-	char buf_getzone[25] = { 0xF0, 0, 0, 0x7F, 0, 0, RUSS_KEYPAD_ID, 0x01, 0x04, 0x02, 0, 0, 0x07, 0, 0, 0, 0xF7 };
+	char buf_getzone[25] = { 0xF0, 0, 0, 0x7F, 0, 0, keypadid, 0x01, 0x04, 0x02, 0, 0, 0x07, 0, 0, 0, 0xF7 };
 	buf_getzone[1] = zone/ZONES_PER_CONTROLLER;
 	buf_getzone[11] = zone%ZONES_PER_CONTROLLER;
 	buf_getzone[15] = (int) russChecksum (buf_getzone,17-2);
@@ -167,10 +167,10 @@
 	//block here until something is received from russound (it's turned off)
 	pthread_mutex_lock(&standbylock);
 	pthread_mutex_unlock(&standbylock);
-	char buf_msg1[25] = { 0, 0, 0, 0x7F, 0, 0, RUSS_KEYPAD_ID, 0x05, 0x02, 0x02, 0, 0, 0xF1, 0x23, 0, 0, 0, 0, 0, 0x01, 0, 0xF7 };
+	char buf_msg1[25] = { 0, 0, 0, 0x7F, 0, 0, keypadid, 0x05, 0x02, 0x02, 0, 0, 0xF1, 0x23, 0, 0, 0, 0, 0, 0x01, 0, 0xF7 };
 	buf_msg1[1] = controller;
 	buf_msg1[17] = zone;
-	char buf_msg2[25] = { 0, 0, 0, 0x7F, 0, 0, RUSS_KEYPAD_ID, 0, 0x05, 0x02, 0, 0, 0, 0, 0, 0, 0, 0x01, 0, 0x01, 0, 0, 0, 0xF7 };
+	char buf_msg2[25] = { 0, 0, 0, 0x7F, 0, 0, keypadid, 0, 0x05, 0x02, 0, 0, 0, 0, 0, 0, 0, 0x01, 0, 0x01, 0, 0, 0, 0xF7 };
 	buf_msg2[1] = controller;
 	buf_msg2[11] = zone;
 
@@ -497,22 +497,22 @@
 	switch (func) {
 			case 1:
 				zones[num].zonepower =val;
-				if (zones[num].inited)
+				if (zones[num].inited || sendOnStart)
 					sendKNXdgram (0x80,1,(knxstartaddress+30)+(zone*40)+(controller*256),val);
 				break;
 			case 2:
 				zones[num].srcid =val;
-				if (zones[num].inited)
+				if (zones[num].inited || sendOnStart)
 					sendKNXdgram (0x80,51,(knxstartaddress+31)+(zone*40)+(controller*256),val);
 				break;
 			case 3:
 				zones[num].volume =val;
-				if (zones[num].inited)
+				if (zones[num].inited || sendOnStart)
 					sendKNXdgram (0x80,5,(knxstartaddress+32)+(zone*40)+(controller*256),val*2);
 				break;
 			case 4:
 				zones[num].bass =val;
-				if (zones[num].inited) {
+				if (zones[num].inited || sendOnStart) {
 					if (val<10)
 						sendKNXdgram (0x80,51,(knxstartaddress+33)+(zone*40)+(controller*256),val-10+256);
 					else
@@ -521,7 +521,7 @@
 				break;
 			case 5:
 				zones[num].treble =val;
-				if (zones[num].inited) {
+				if (zones[num].inited || sendOnStart) {
 					if (val<10)
 						sendKNXdgram (0x80,51,(knxstartaddress+34)+(zone*40)+(controller*256),val-10+256);
 					else
@@ -530,12 +530,12 @@
 				break;
 			case 6:
 				zones[num].loudness =val;
-				if (zones[num].inited)
+				if (zones[num].inited || sendOnStart)
 					sendKNXdgram (0x80,1,(knxstartaddress+35)+(zone*40)+(controller*256),val);
 				break;
 			case 7:
 				zones[num].balance =val;
-				if (zones[num].inited) {
+				if (zones[num].inited || sendOnStart) {
 					if (val<10)
 						sendKNXdgram (0x80,51,(knxstartaddress+36)+(zone*40)+(controller*256),val-10+256);
 					else
@@ -544,17 +544,17 @@
 				break;
 			case 8:
 				zones[num].partymode =val;
-				if (zones[num].inited)
+				if (zones[num].inited || sendOnStart)
 					sendKNXdgram (0x80,1,(knxstartaddress+37)+(zone*40)+(controller*256),val);
 				break;
 			case 9:
 				zones[num].dnd =val;
-				if (zones[num].inited)
+				if (zones[num].inited || sendOnStart)
 					sendKNXdgram (0x80,1,(knxstartaddress+38)+(zone*40)+(controller*256),val);
 				break;
 			case 10:
 				zones[num].onvolume =val;
-				if (zones[num].inited)
+				if (zones[num].inited || sendOnStart)
 					sendKNXdgram (0x80,5,(knxstartaddress+39)+(zone*40)+(controller*256),val*2);
 				break;
 			default:
@@ -570,26 +570,24 @@
 			syslog(LOG_DEBUG,"russ Controller:%d Zone:%d Status:%d src:%d vol:%d bass:%d treb:%d loud:%d bal:%d sys:%d shrsrc:%d party:%d,DnD:%d\n",
 			       buf[4],buf[12],buf[20],buf[21],buf[22],buf[23],buf[24],buf[25],buf[26],buf[27],buf[28],buf[29],buf[30]);
 		buf[12] = (buf[4]*ZONES_PER_CONTROLLER)+buf[12]; //controller + zonenumber
-		if (sendOnStart)
-			zones[buf[12]].inited = 1;
 		
-		if (buf[20] != zones[buf[12]].zonepower)
+		if (buf[20] != zones[buf[12]].zonepower || (sendOnStart && !zones[buf[12]].inited))
 			updateZone(buf[12],buf[20],1);
-		if (buf[21] != zones[buf[12]].srcid)
+		if (buf[21] != zones[buf[12]].srcid  || (sendOnStart && !zones[buf[12]].inited))
 			updateZone(buf[12],buf[21],2);
-		if (buf[22] != zones[buf[12]].volume)
+		if (buf[22] != zones[buf[12]].volume || (sendOnStart && !zones[buf[12]].inited))
 			updateZone(buf[12],buf[22],3);
-		if (buf[23] != zones[buf[12]].bass)
+		if (buf[23] != zones[buf[12]].bass || (sendOnStart && !zones[buf[12]].inited))
 			updateZone(buf[12],buf[23],4);
-		if (buf[24] != zones[buf[12]].treble)
+		if (buf[24] != zones[buf[12]].treble || (sendOnStart && !zones[buf[12]].inited))
 			updateZone(buf[12],buf[24],5);
-		if (buf[25] != zones[buf[12]].loudness)
+		if (buf[25] != zones[buf[12]].loudness || (sendOnStart && !zones[buf[12]].inited))
 			updateZone(buf[12],buf[25],6);
-		if (buf[26] != zones[buf[12]].balance)
+		if (buf[26] != zones[buf[12]].balance || (sendOnStart && !zones[buf[12]].inited))
 			updateZone(buf[12],buf[26],7);
-		if (buf[29] != zones[buf[12]].partymode)
+		if (buf[29] != zones[buf[12]].partymode || (sendOnStart && !zones[buf[12]].inited))
 			updateZone(buf[12],buf[29],8);
-		if (buf[30] != zones[buf[12]].dnd)
+		if (buf[30] != zones[buf[12]].dnd || (sendOnStart && !zones[buf[12]].inited))
 			updateZone(buf[12],buf[30],9);
 		zones[buf[12]].inited = 1;
 	} else if ((len==24) && (buf[0]==0xF0) && (buf[9]==0x05) && (buf[13]==0x00)) { //zone turn-on volume
@@ -597,7 +595,7 @@
 			syslog(LOG_DEBUG,"russ Controller:%d Zone:%d TurnOnVolume:%d",
 			       buf[4],buf[12],buf[21]);
 		buf[12] = (buf[4]*ZONES_PER_CONTROLLER)+buf[12]; //controller + zonenumber
-		if (buf[21] != zones[buf[12]].onvolume)
+		if (buf[21] != zones[buf[12]].onvolume || (sendOnStart && !zones[buf[12]].inited))
 			updateZone(buf[12],buf[21],10);
 	} else {
 		//FIXME: just for debugging
@@ -740,7 +738,7 @@
 	char *p;
 	char pidstr[255];
 	
-	while ((c = getopt (argc, argv, "dp:i:l:a:z:u:s")) != -1)
+	while ((c = getopt (argc, argv, "dp:i:l:a:z:u:sk:")) != -1)
 		switch (c) {
 			case 'd':
 				daemonize = 1;
@@ -754,8 +752,8 @@
 			case 'i':
 				p = strtok(optarg,":");
 				russipaddr = p;
-				p = strtok (NULL, ":");
-				russport = atoi(p);
+				if ((p = strtok (NULL, ":")))
+					russport = atoi(p);
 				break;
 			case 'l':
 				listenport = atoi(optarg);
@@ -769,6 +767,9 @@
 			case 'u':
 				eibd_url = optarg;
 				break;
+			case 'k':
+				keypadid = strtol(optarg,NULL,16);
+				break;
 			case '?':
 				//FIXME: check arguments better, print_usage
 				fprintf (stderr, "Unknown option `-%c'.\nUsage: %s %s", optopt, argv[0], USAGESTRING);
@@ -786,8 +787,8 @@
     if (!daemonize) {
 	    setlogmask(LOG_UPTO(LOG_DEBUG));
 		openlog(DAEMON_NAME, LOG_CONS | LOG_NDELAY | LOG_PERROR | LOG_PID, LOG_USER);
-        syslog(LOG_DEBUG, "startup with debug; Russ-IP: %s:%d, listenport %d, pidfile: %s, start address: %d, number of zones: %d, eibd: %s", 
-               russipaddr, russport, listenport, pidfilename, knxstartaddress, numzones, eibd_url);
+        syslog(LOG_DEBUG, "startup with debug; Russ-IP: %s:%d, listenport %d, pidfile: %s, start address: %d, number of zones: %d, eibd: %s SendonStartup: %d KeypadID: %d", 
+               russipaddr, russport, listenport, pidfilename, knxstartaddress, numzones, eibd_url, sendOnStart, keypadid);
 	} else {
 	    setlogmask(LOG_UPTO(LOG_INFO));
 		openlog(DAEMON_NAME, LOG_CONS, LOG_USER);

This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.

[Openautomation-svn] SF.net SVN: openautomation:[1447] tools/russconnectd

[<ma...@us...>]

Revision: 1447
          http://openautomation.svn.sourceforge.net/openautomation/?rev=1447&view=rev
Author:   makki1
Date:     2013-02-09 16:21:00 +0000 (Sat, 09 Feb 2013)
Log Message:
-----------
Just comments to get commited before the 0.21 release-tag (which is working perfectly with CA*)

Modified Paths:
--------------
    tools/russconnectd/trunk/README
    tools/russconnectd/trunk/russ_galist.ods
    tools/russconnectd/trunk/src/main.c

Added Paths:
-----------
    tools/russconnectd/tags/
    tools/russconnectd/tags/0.21/

Modified: tools/russconnectd/trunk/README
===================================================================
--- tools/russconnectd/trunk/README	2013-02-09 12:47:12 UTC (rev 1446)
+++ tools/russconnectd/trunk/README	2013-02-09 16:21:00 UTC (rev 1447)
@@ -38,5 +38,9 @@
 -> implement RIO protocal partially
 -> connect to lirc directly?
 - don't depend on libeibclient then
-- *maybe* add outgoing interfaces for KNX-> mpd,vdr,.. to stick multiroom togehter
+- *maybe* add outgoing interfaces for KNX-> mpd,vdr,.. to stick multiroom together (sort of mpc/svdrp-client)
 - add at least a KNX-address to switch on/off to avoid ext. logic here
+
+*** PENDING
+- make RNET work on C5
+- global GA for source of all zones?

Modified: tools/russconnectd/trunk/russ_galist.ods
===================================================================
(Binary files differ)

Modified: tools/russconnectd/trunk/src/main.c
===================================================================
--- tools/russconnectd/trunk/src/main.c	2013-02-09 12:47:12 UTC (rev 1446)
+++ tools/russconnectd/trunk/src/main.c	2013-02-09 16:21:00 UTC (rev 1447)
@@ -1,7 +1,7 @@
 /* -*- Mode: C; indent-tabs-mode: nil; c-basic-offset: 4; tab-width: 4 -*- */
 /*
  * main.c
- * Copyright (C) Michael Markstaller 2011-2012 <de...@wi...>
+ * Copyright (C) Michael Markstaller 2011-2013 <de...@wi...>
  * 
  * russconnectd is free software: you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -26,7 +26,6 @@
 #include <syslog.h>
 #include <string.h>
 #include <signal.h>
-//#include <assert.h>
 
 #include <arpa/inet.h>
 #include <netinet/in.h>
@@ -150,7 +149,7 @@
     syslog(LOG_DEBUG, "polling zone %d",zone);
     pthread_mutex_trylock(&standbylock);
 
-    //Send device reset-event to wakeup (at least) C3 - yet untested
+    //Send device reset-event to wakeup (at least) E5 *NOT* C3/C5! - untested and most likely useless
     if (keypadid == 0x71) {
         char buf_devreset[25] = { 0xF0, 0, 0, 0x7F, 0, 0, keypadid, 0x05, 0x02, 0x02, 0, 0, 0x55, 0x01, 0x03, 0, 0x35, 0, 0x01, 0, 0xF7 };
         buf_devreset[4] = zone/ZONES_PER_CONTROLLER;
@@ -172,6 +171,15 @@
 
     //Get zonestate
     char buf_getzone[25] = { 0xF0, 0, 0, 0x7F, 0, 0, keypadid, 0x01, 0x04, 0x02, 0, 0, 0x07, 0, 0, 0, 0xF7 };
+    //FIXME: according to RNet 1.004 controller and zone are inserted twice!
+    /* This is the Request message for the parameter values of the selected Zone.
+    Byte # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
+    Value F0 cc 00 7F cc zz kk 01 04 02 00 zz 07 00 00 xx F7
+    cc = controller number -1
+    zz = zone number -1
+    kk = keypad id = 0x70 (0x71 when connected to an ACA-E5).
+    xx = checksum
+    */
     buf_getzone[1] = zone/ZONES_PER_CONTROLLER;
     buf_getzone[11] = zone%ZONES_PER_CONTROLLER;
     buf_getzone[15] = (int) russChecksum (buf_getzone,17-2);
@@ -190,6 +198,18 @@
     //block here until something is received from russound (it's turned off)
     pthread_mutex_lock(&standbylock);
     pthread_mutex_unlock(&standbylock);
+    /* The whole stuff in RNET is a little different than it's written for the C5
+    Zone and controller are set twice now, CA* understands the old, C5 not:
+    8.1.1 Set State
+    Turn a specific Zone ON or OFF using a discrete message.
+    Byte # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
+    Value F0 cc 00 7F cc zz kk 05 02 02 00 00 F1 23 00 ## 00 zz 00 01 xx F7
+    cc = controller number -1
+    zz = zone number -1
+    kk = 0x70 (0x71 when connected to an ACA-E5).
+    xx = checksum
+    Byte #16 = 0x00 (off) or 0x01(on)
+    */
     char buf_msg1[25] = { 0, 0, 0, 0x7F, 0, 0, keypadid, 0x05, 0x02, 0x02, 0, 0, 0xF1, 0x23, 0, 0, 0, 0, 0, 0x01, 0, 0xF7 };
     buf_msg1[1] = controller;
     buf_msg1[17] = zone;
@@ -199,6 +219,12 @@
 
     switch (func) {
         case -9: //all zones
+            //FIXME: different on C5!
+            /* controller 0:
+            All On F0 7E 00 7F 00 00 71 05 02 02 00 00 F1 22 00 01 00 00 00 01 10 F7
+            All Off F0 7E 00 7F 00 00 71 05 02 02 00 00 F1 22 00 00 00 00 00 01 0F F7
+            CAV/CAM/CAA All On F0 7E 00 7F 00 00 70 05 02 02 00 00 F1 22 00 00 01 00 00 01 0F F7
+            */
             buf_msg1[0] = 0xF0;
             buf_msg1[1] = 0x7E;
             buf_msg1[13] = 0x22;
@@ -626,6 +652,8 @@
         buf[12] = (buf[4]*ZONES_PER_CONTROLLER)+buf[12]; //controller + zonenumber
         if (buf[21] != zones[buf[12]].onvolume || (sendOnStart && !zones[buf[12]].inited))
             updateZone(buf[12],buf[21],10);
+    } else if ((len==23) && (buf[0]==0xF0) && (buf[7]==0x05)) { //FIXME: C5 sends this periodically
+        printf(" not parsed yet, len: %d ",len);
     } else {
         //FIXME: just for debugging
         //for (i=0; i<len; i++)
@@ -848,7 +876,7 @@
         close(STDERR_FILENO);
     }
     //FIXME: output errors to stderr, change order
-    pidFilehandle = open(pidfilename, O_RDWR|O_CREAT, 0600);
+    pidFilehandle = open(pidfilename, O_RDWR|O_CREAT, 0644);
     if (pidFilehandle == -1 )
     {
         syslog(LOG_INFO, "Could not open pidfile %s, exiting", pidfilename);

This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.

[Openautomation-svn] SF.net SVN: openautomation:[1450] tools/russconnectd

[<ma...@us...>]

Revision: 1450
          http://openautomation.svn.sourceforge.net/openautomation/?rev=1450&view=rev
Author:   makki1
Date:     2013-02-09 18:01:44 +0000 (Sat, 09 Feb 2013)
Log Message:
-----------
Binaries for russconnectd

Added Paths:
-----------
    tools/russconnectd/russconnectd_0.21-1_i386.deb
    tools/russconnectd/russconnectd_0.30-1_i386.deb

Added: tools/russconnectd/russconnectd_0.21-1_i386.deb
===================================================================
(Binary files differ)


Property changes on: tools/russconnectd/russconnectd_0.21-1_i386.deb
___________________________________________________________________
Added: svn:mime-type
   + application/octet-stream

Added: tools/russconnectd/russconnectd_0.30-1_i386.deb
===================================================================
(Binary files differ)


Property changes on: tools/russconnectd/russconnectd_0.30-1_i386.deb
___________________________________________________________________
Added: svn:mime-type
   + application/octet-stream

This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.

[Openautomation-svn] SF.net SVN: openautomation:[2042] tools/russconnectd

[<ma...@us...>]

Revision: 2042
          http://sourceforge.net/p/openautomation/code/2042
Author:   makki1
Date:     2014-01-13 20:35:26 +0000 (Mon, 13 Jan 2014)
Log Message:
-----------
russconnectd 0.34 - add binaries

Added Paths:
-----------
    tools/russconnectd/russconnectd_0.34-1.dsc
    tools/russconnectd/russconnectd_0.34-1.tar.gz
    tools/russconnectd/russconnectd_0.34-1_i386.changes
    tools/russconnectd/russconnectd_0.34-1_i386.deb

Added: tools/russconnectd/russconnectd_0.34-1.dsc
===================================================================
--- tools/russconnectd/russconnectd_0.34-1.dsc	                        (rev 0)
+++ tools/russconnectd/russconnectd_0.34-1.dsc	2014-01-13 20:35:26 UTC (rev 2042)
@@ -0,0 +1,26 @@
+-----BEGIN PGP SIGNED MESSAGE-----
+Hash: SHA1
+
+Format: 3.0 (native)
+Source: russconnectd
+Binary: russconnectd
+Architecture: any
+Version: 0.34-1
+Maintainer: Michael Markstaller <de...@wi...>
+Homepage: <insert the upstream URL, if relevant>
+Standards-Version: 3.9.1
+Build-Depends: debhelper (>= 5.0), autotools-dev
+Checksums-Sha1: 
+ ca896515389d5ee566f386441526d7ad9892f672 300143 russconnectd_0.34-1.tar.gz
+Checksums-Sha256: 
+ 06af90e7a5a2f51040fea6f4ac390775bd107ccf9666021baae6224785433a6f 300143 russconnectd_0.34-1.tar.gz
+Files: 
+ 946c6b10da33bfcd96fc00763408ce10 300143 russconnectd_0.34-1.tar.gz
+
+-----BEGIN PGP SIGNATURE-----
+Version: GnuPG v1.4.9 (GNU/Linux)
+
+iEYEARECAAYFAlLUTWMACgkQaWRHV2kMuALDFwCdEyRDmpFcGo0zKEv89wNKd3xU
+GXIAoL0/tEMy8R4Lr136oaeGMu0nmV8g
+=Akt5
+-----END PGP SIGNATURE-----

Added: tools/russconnectd/russconnectd_0.34-1.tar.gz
===================================================================
(Binary files differ)

Index: tools/russconnectd/russconnectd_0.34-1.tar.gz
===================================================================
--- tools/russconnectd/russconnectd_0.34-1.tar.gz	2014-01-13 20:18:04 UTC (rev 2041)
+++ tools/russconnectd/russconnectd_0.34-1.tar.gz	2014-01-13 20:35:26 UTC (rev 2042)

Property changes on: tools/russconnectd/russconnectd_0.34-1.tar.gz
___________________________________________________________________
Added: svn:mime-type
## -0,0 +1 ##
+application/octet-stream
\ No newline at end of property
Added: tools/russconnectd/russconnectd_0.34-1_i386.changes
===================================================================
--- tools/russconnectd/russconnectd_0.34-1_i386.changes	                        (rev 0)
+++ tools/russconnectd/russconnectd_0.34-1_i386.changes	2014-01-13 20:35:26 UTC (rev 2042)
@@ -0,0 +1,39 @@
+-----BEGIN PGP SIGNED MESSAGE-----
+Hash: SHA1
+
+Format: 1.8
+Date: Mon, 13 Jan 2014 20:49:47 +0100
+Source: russconnectd
+Binary: russconnectd
+Architecture: source i386
+Version: 0.34-1
+Distribution: lenny
+Urgency: low
+Maintainer: Michael Markstaller <de...@wi...>
+Changed-By: Michael Markstaller <mi...@ma...>
+Description: 
+ russconnectd - simple daemon to control Russsound amp from KNX
+Changes: 
+ russconnectd (0.34-1) lenny; urgency=low
+ .
+   * Fix standbylock
+Checksums-Sha1: 
+ ba2405b1b119afd797b8f5293266f324a38eb62f 805 russconnectd_0.34-1.dsc
+ ca896515389d5ee566f386441526d7ad9892f672 300143 russconnectd_0.34-1.tar.gz
+ ee285ed16e65b54e70ec0c043c803260a41b37d2 97682 russconnectd_0.34-1_i386.deb
+Checksums-Sha256: 
+ 5e56734e0dc76837ff799f461254a8eae282dfeab809a9dc8a2458cd0f930fee 805 russconnectd_0.34-1.dsc
+ 06af90e7a5a2f51040fea6f4ac390775bd107ccf9666021baae6224785433a6f 300143 russconnectd_0.34-1.tar.gz
+ 690de5d656fd5d8634099d929ed9f1c1b7f01c1d593a50ac70da00c0b29284f4 97682 russconnectd_0.34-1_i386.deb
+Files: 
+ 7a0e6fcaecbb426831a9fd21e63cd27f 805 unknown extra russconnectd_0.34-1.dsc
+ 946c6b10da33bfcd96fc00763408ce10 300143 unknown extra russconnectd_0.34-1.tar.gz
+ 2b00ed4b6acbf5e50c830cfb44f7b69d 97682 unknown extra russconnectd_0.34-1_i386.deb
+
+-----BEGIN PGP SIGNATURE-----
+Version: GnuPG v1.4.9 (GNU/Linux)
+
+iEYEARECAAYFAlLUTWoACgkQaWRHV2kMuAJjbgCgqFmRzL9B7aYGyDZ8s3M2JlAG
+FQwAn2fB0W8oMLAC0Tl7+H7u4Xr75x+8
+=ltV3
+-----END PGP SIGNATURE-----

Added: tools/russconnectd/russconnectd_0.34-1_i386.deb
===================================================================
(Binary files differ)

Index: tools/russconnectd/russconnectd_0.34-1_i386.deb
===================================================================
--- tools/russconnectd/russconnectd_0.34-1_i386.deb	2014-01-13 20:18:04 UTC (rev 2041)
+++ tools/russconnectd/russconnectd_0.34-1_i386.deb	2014-01-13 20:35:26 UTC (rev 2042)

Property changes on: tools/russconnectd/russconnectd_0.34-1_i386.deb
___________________________________________________________________
Added: svn:mime-type
## -0,0 +1 ##
+application/octet-stream
\ No newline at end of property
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.