[Open64-user] Re: [Ipf-orc-support] Problems with compiled source code

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 454-5900

Yeah I also saw the warning about IPA, but I have only used "-w -v -O3",
and mine also 
has 1 equake file called "equake.c"

thanks,
Gautam

"Chan, Sun C" wrote:
> 
> The DevWarns are usually quite harmless (otherwise, they would have been
> FmtAssert or Is_True). Which are really assertions. I would not spend waste
> too much time trying to figure out why things dies using DevWarns as hints.
> I just tried doing the same thing, using the compile I built, it seemed to
> work for me, with one caviar:
> the directory I have with equake has only one source file called "quake.c".
> I'm not sure if we are compiling the same source file.
> 
> Wait, but your message also has DevWarn from IPA_... did you use IPA?
> 
> Sun
> 
> > -----Original Message-----
> > From: Gautam - Chakrabarti [mailto:cha...@ms...]
> > Sent: Friday, March 08, 2002 2:36 PM
> > To: Chan, Sun C
> > Cc: ope...@li...; ipf...@so...
> > Subject: Re: [Ipf-orc-support] Problems with compiled source code
> >
> >
> > No, there was no problem with the released binaries, i.e. the binaries
> > made available during ORC release. The compilation that I did was done
> > with the debug flag ON, after I made INSTALL, its giving these errors,
> > btw the trace given below is for O3, if I compile Parser for
> > example, it
> > gives the additional warning
> >
> > !!! DevWarn during Ipfec if conversion: predicate, so change opcode to
> > cmp4_i.ne.unc
> >
> > before dying.
> >
> > Thanks,
> > Gautam
> >
> > "Chan, Sun C" wrote:
> > >
> > > Apparently its dying in global scheduler. Did you get the
> > same problem with
> > > the "released" compiler binary?
> > > Sun
> > >
> > > > -----Original Message-----
> > > > From: Gautam Chakrabarti [mailto:cha...@pi...]
> > > > Sent: Friday, March 08, 2002 2:21 PM
> > > > To: ope...@li...
> > > > Cc: ipf...@so...
> > > > Subject: [Ipf-orc-support] Problems with compiled source code
> > > >
> > > >
> > > > Hi,
> > > >
> > > > I had earlier installed ORC from the binaries, the ORC
> > FAQ suggests
> > > > installing from the binaries. Then I compiled the source
> > code as given
> > > > in README.src using makefiles Make.cross and Make.NUE.lib,
> > > > and then did
> > > > INSTALL. Please let me know if this process is wrong,
> > this process was
> > > > mentioned for sgicc.
> > > >
> > > > After this installation, compilation is failing in BE after
> > > > giving some
> > > > warnings in INLINE and BE (when I use O2 or O3). I am
> > giving part of
> > > > the errors for the benchmark Equake ::::
> > > >
> > > > ---------------------------------------------------------
> > > > /nue/usr/lib/gcc-lib/ia64-orc-linux/orcc-1.0/inline
> > > > -LIST:source=off:notes=off
> > > > -PHASE:l:w:c -TENV:PIC -m1 -INTERNAL:return_val=on
> > > > -INTERNAL:mldid_mstid=on
> > > > -INTERNAL:return_info=on -m0 -show -O3 -TARG:abi=i64
> > > > -fB,/tmp/ccB.GvyZ96
> > > > -fI,/tmp/ccI.dSPj0L equake.c
> > > > !!! DevWarn during Reading WHIRL file: Should use
> > ST_pu_type instead
> > > > !!! DevWarn during Reading WHIRL file: Count limit reached on
> > > > the following
> > > > DevWarn:
> > > > !!! DevWarn during Reading WHIRL file: Should use
> > ST_pu_type instead
> > > > !!! DevWarn during Reading WHIRL file: TODO: implement
> > *skip* option
> > > > !!! DevWarn during Reading WHIRL file: IPA_NODE::Skip is not
> > > > yet implemented
> > > >
> > > > /nue/usr/lib/gcc-lib/ia64-orc-linux/orcc-1.0/be
> > > > -LIST:source=off:notes=off
> > > > -PHASE:l:w:c -G8 -TENV:PIC -m1 -INTERNAL:return_val=on
> > > > -INTERNAL:mldid_mstid=on
> > > > -INTERNAL:return_info=on -m0 -show -O3 -TARG:abi=i64 -LANG:=ansi_c
> > > > -fB,/tmp/ccI.dSPj0L -s -fs,/tmp/ccs.MGyQpY equake.c
> > > > Compiling equake.c (/tmp/ccI.dSPj0L) -- Back End
> > > > Compiling main(0)
> > > > !!! DevWarn during Loop Nest Optimizer: Count limit reached
> > > > on the following
> > > > DevWarn:
> > > > !!! DevWarn during Loop Nest Optimizer: TODO: Tune LNO
> > > > machine model parameters
> > > > for IA-64
> > > > Signal: Segmentation fault in Global code motion phase.
> > > > Error: Signal Segmentation fault in phase Global code motion
> > > > -- processing
> > > > aborted
> > > > orcc ERROR:  /nue/usr/lib/gcc-lib/ia64-orc-linux/orcc-1.0/be
> > > > died due to signal
> > > > 4
> > > > make: *** [equake.o] Error 32
> > > > --------------------------------------------------------------
> > > > ----------
> > > >
> > > > I found its giving the segmentation fault in the call to
> > > >
> > > > CG_Generate_Code(pu, alias_mgr,
> > PU_Info_pu_dst(current_pu), FALSE);
> > > >
> > > > inside Post_Process_Backend()
> > > >
> > > > The warnings from inline are coming through the function
> > > > ST_type() and it
> > > > asks that the function ST_pu_type() should be used instead. I
> > > > am wondering
> > > > if it should have got into this...I think CG_Generate_Code_p
> > > > is not getting a
> > > > proper value in the call to CG_Generate_Code()....
> > > >
> > > > Please let me know what I need to do.
> > > >
> > > > Thanks,
> > > > Gautam
> > > >
> > > > -------------------------------------------
> > > > Gautam Chakrabarti
> > > > MS Student
> > > > Computer Sc. & Engineering Dept.
> > > > Michigan State University
> > > >
> > > > Email: cha...@ms...
> > > > Home Page: http://www.cse.msu.edu/~chakra10
> > > > --------------------------------------------
> > > >
> > > > _______________________________________________
> > > > ipf-orc-support mailing list
> > > > ipf...@li...
> > > > https://lists.sourceforge.net/lists/listinfo/ipf-orc-support
> > > >
> >
> > --
> > ***************************************************************
> > Gautam Chakrabarti
> > MS Student
> > Computer Sc. and Engg Department
> > Michigan State University
> >
> > Email : cha...@ms...
> > Home Page : http://www.cse.msu.edu/~chakra10
> >
> > Why is there so much month left at the end of the money?
> >               --- John Barrymore
> > ***************************************************************
> >

-- 
***************************************************************
Gautam Chakrabarti
MS Student
Computer Sc. and Engg Department
Michigan State University

Email : cha...@ms...
Home Page : http://www.cse.msu.edu/~chakra10

Why is there so much month left at the end of the money?
		--- John Barrymore
***************************************************************