Re: [Opalvoip-user] Silence when dialing. How to fix?
Brought to you by:
csoutheren,
rjongbloed
From: Dmitry <gor...@mt...> - 2012-09-19 22:25:46
|
Re: [Opalvoip-user] Some basic questions and comments about Set/Get Volume and MuteSorry, I should explain some more. If to do call with SIP provider, all is OK, so I can listen to the real line ( long signals) after some small time. ============= MesType=OpalIndProceeding Proceeding. m_callToken=C3195e96f11 MesType=OpalIndMediaStream Media stream audio in opened using G.711-uLaw-64k. MesType=OpalIndMediaStream Media stream audio out opened using G.711-uLaw-64k. <long signals> MesType=OpalIndAlerting Ringing. m_callToken=C3195e96f11 ----here call answered--- MesType=OpalIndEstablished Established. m_callToken=C3195e96f11 ================ If I do the same with AXON PBX, I see MediaStreams only after the call answered. Before this moment I have silence in the PC Speakers. ================ MesType=OpalIndProceeding Proceeding. m_callToken=Cef6a6be913 MesType=OpalIndAlerting Ringing. m_callToken=Cef6a6be913 <silence> ----here call answered--- MesType=OpalIndMediaStream Media stream audio in opened using G.711-uLaw-64k. MesType=OpalIndMediaStream Media stream audio out opened using G.711-uLaw-64k. MesType=OpalIndEstablished Established. m_callToken=Cef6a6be913 =================== About 2-3 years ago the same problem was with T38modem (have possibility to listen to the line in Voice mode). I don't know how but Vjacheslav fixed it in his application. It looks that we need something like pseudo- long signals to PC speakers in such situation (when no real media before the call answered). How to do? This is a very common situation, and all SIP softphones typically use a pseudo-indication. Best Regards, Dmitry. ----- Original Message ----- From: Dmitry To: Robert Jongbloed Cc: opa...@li... Sent: Thursday, September 20, 2012 1:44 AM Subject: [Opalvoip-user] Silence when dialing. How to fix? The simple question. For example Opal do: partyA = "pc:*"; SetUpCall(partyA, command.m_param.m_callSetUp.m_partyB, token, NULL, 0, &options I listen to the silence before the other party answered. I want to "listen to the line": long signals, busy signals. How to activate? I don't see such function in the OpenPhone (at least with old versions I am able to compile). What to do? Best Regards, Dmitry. |