The old IBM oRexx interpreter could be used as stage in a pipeline (OS/2, Windows 2000/XP, Linux)
The ooRexx interpreter seems not to work as stage command, example below (Windows XP, Linux SUSE 11.2)
I don't find in the reference/programmer guide whether it is supposed to work.
OK as first stage in the pipeline:
uli@ulmo:~> rexx test.rex <temp.dat | more
HELLO
aaa
bbb
ccc
GOODBYE
As second stage in the pipeline, STDIN does not receive input:
uli@ulmo:~> more <temp.dat | rexx test.rex
HELLO
GOODBYE
test.rex:
say hello
do while lines()
line = linein()
call lineout , line
-- say line
end
temp.dat:
aaa
bbb
ccc
uli@ulmo:~> rpm -q ooRexx
ooRexx-4.1.0-5678.x86_64
uli@ulmo:~> uname -a
Linux ulmo 2.6.31.12-0.1-desktop #1 SMP PREEMPT 2010-01-27 08:20:11 +0100 x86_64 x86_64 x86_64 GNU/Linux
uli@ulmo:~> rexx -v
Open Object Rexx Version 4.1.0
Build date: Mar 9 2010
Addressing Mode: 64
Anonymous
Same problem under windows
I can have a good result from lines() by changing that, but not sure it's the good solution (windows only) :
Assume that a FIFO is a transient stream :
SysFile::getStreamTypeInfo
if ((fileInfo.st_mode & _S_IFIFO) != 0)
{
transient = true;
}
I had to change that :
SysFile::hasData
return !atEof();
I think that this change should be done as well :
MSDN doc :
st_size : If fd refers to a device, the st_atime, st_ctime, st_mtime, and st_size fields are not meaningful.
st_dev : If a device, fd; otherwise 0.
SysFile::getSize
//if ((fileInfo.st_mode & _S_IFREG) != 0)
if (fileInfo.st_dev == 0)
{
size = fileInfo.st_size;
chars() has same problem as lines().
Rony gave a workaround.
test.rex:
say hello
do while stream('STDIN:', 'state')="READY"
line = linein()
call lineout , line
-- say line
end
say goodbye
uli@ulmo:~> more <temp.dat 2="">1 | rexx test.rex
HELLO
aaa
bbb
ccc</temp.dat>
GOODBYE
Probably the fastest logic to work on input pipes would be something like:
signal on notready / if input pipe breaks /
do forever
say reverse(linein()) / get line from STDIN:, reverse it, write it to STDOUT: /
end
NOTREADY:
---rony
I'm having VMWare issues today...can somebody with access to a Linux system see if the fix I just committed fixes this problem? The Windows fix Jean-Louis suggested appears to fix the problem without introducing any test regressions.
rev. 5574 doesn't compile here (SUSE 11.2).
rev. 5573 does compile.
error message from "make rpm" :
libtool: compile: g++ -DHAVE_CONFIG_H -I. -DORX_VER=4 -DORX_REL=1 -DORX_MOD=0 -DORX_FIX=0 -DORX_SYS_STR=\"LINUX\" -DORX_CATDIR=\"/opt/ooRexx/bin\" -DORX_SHARED_LIBRARY_EXT=\".so\" -I./lib -I./api -I./api/platform/unix -I./common -I./common/platform/unix -I./interpreter -I./interpreter/behaviour -I./interpreter/execution -I./interpreter/memory -I./interpreter/package -I./interpreter/concurrency -I./interpreter/expression -I./interpreter/instructions -I./interpreter/classes -I./interpreter/classes/support -I./interpreter/runtime -I./interpreter/parser -I./interpreter/messages -I./interpreter/streamLibrary -I./interpreter/platform/common -I./interpreter/platform/unix -g -O2 -g -O2 -Wall -funsigned-char -Wpointer-arith -Wcast-qual -Wcast-align -Wshadow -Wwrite-strings -D__cplusplus -Wredundant-decls -DNOOPT -DPTHREAD_KERNEL -D_POSIX_THREAD -D_REENTRANT -D_GNU_SOURCE -DLINUX -DOPSYS_LINUX -MT librexx_la-ArrayClass.lo -MD -MP -MF .deps/librexx_la-ArrayClass.Tpo -c ./interpreter/classes/ArrayClass.cpp -fPIC -DPIC -o .libs/librexx_la-ArrayClass.o
In file included from ./interpreter/expression/ExpressionStack.hpp:48,
from ./interpreter/concurrency/RexxActivity.hpp:50,
from ./interpreter/runtime/RexxCore.h:243,
from ./interpreter/classes/ArrayClass.cpp:70:
./interpreter/classes/ArrayClass.hpp:76: error: ‘boolean’ does not name a type
./interpreter/classes/ArrayClass.cpp: In member function ‘void RexxArray::quickSort(BaseSortComparator&, size_t, size_t)’:
./interpreter/classes/ArrayClass.cpp:2325: error: ‘class PartitionBounds’ has no member named ‘isSmall’
make[1]: *** [librexx_la-ArrayClass.lo] Error 1
ulmo:~ # uname -a
Linux ulmo 2.6.31.12-0.1-desktop #1 SMP PREEMPT 2010-01-27 08:20:11 +0100 x86_64 x86_64 x86_64 GNU/Linux
ulmo:~ # automake --version
automake (GNU automake) 1.11
ulmo:~/ooRexx/main/trunk # autoconf --version
autoconf (GNU Autoconf) 2.63
ulmo:~ # libtool --version
ltmain.sh (GNU libtool) 2.2.6
ulmo:~/ooRexx/main/trunk # g++ --version
g++ (SUSE Linux) 4.4.1 [gcc-4_4-branch revision 150839]
ulmo:~/ooRexx/main/trunk # gcc -v
Using built-in specs.
Target: x86_64-suse-linux
Configured with: ../configure --prefix=/usr --infodir=/usr/share/info --mandir=/usr/share/man --libdir=/usr/lib64 --libexecdir=/usr/lib64 --enable-languages=c,c++,objc,fortran,obj-c++,java,ada --enable-checking=release --with-gxx-include-dir=/usr/include/c++/4.4 --enable-ssp --disable-libssp --with-bugurl=http://bugs.opensuse.org/ --with-pkgversion='SUSE Linux' --disable-libgcj --disable-libmudflap --with-slibdir=/lib64 --with-system-zlib --enable-__cxa_atexit --enable-libstdcxx-allocator=new --disable-libstdcxx-pch --enable-version-specific-runtime-libs --program-suffix=-4.4 --enable-linux-futex --without-system-libunwind --with-arch-32=i586 --with-tune=generic --build=x86_64-suse-linux
Thread model: posix
gcc version 4.4.1 [gcc-4_4-branch revision 150839] (SUSE Linux)
svn co https://oorexx.svn.sourceforge.net/svnroot/oorexx/main/trunk ~/ooRexx/main/trunk
ulmo:~/ooRexx/main/trunk # ./bootstrap
++ uname -s
+ OS=Linux
+ '[' Linux = Darwin ']'
+ libtoolize --copy --force --automake
+ aclocal
+ autoheader
+ automake --add-missing --copy --foreign
configure.ac:50: installing
./config.guess' configure.ac:50: installing
./config.sub'configure.ac:52: installing
./install-sh' configure.ac:52: installing
./missing'samples/unix/api/callrexx/Makefile.am: installing `./depcomp'
+ autoconf
ulmo:~/ooRexx/main/trunk # ./configure --disable-static
checking build system type... x86_64-suse-linux-gnu
checking host system type... x86_64-suse-linux-gnu
checking target system type... x86_64-suse-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking for a BSD-compatible install... /usr/bin/install -c
checking whether make sets $(MAKE)... (cached) yes
checking for ranlib... ranlib
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/x86_64-suse-linux/bin/ld
checking if the linker (/usr/x86_64-suse-linux/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking for /usr/x86_64-suse-linux/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for ar... ar
checking for strip... strip
checking for ranlib... (cached) ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking whether we are using the GNU C++ compiler... (cached) yes
checking whether g++ accepts -g... (cached) yes
checking dependency style of g++... (cached) gcc3
checking how to run the C++ preprocessor... g++ -E
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/x86_64-suse-linux/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for shl_load... no
checking for shl_load in -ldld... no
checking for dlopen... no
checking for dlopen in -ldl... yes
checking whether a program can dlopen itself... yes
checking whether a statically linked program can dlopen itself... no
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking for ld used by g++... /usr/x86_64-suse-linux/bin/ld -m elf_x86_64
checking if the linker (/usr/x86_64-suse-linux/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/x86_64-suse-linux/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/x86_64-suse-linux/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether byte ordering is bigendian... no
checking for ANSI C header files... (cached) yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking features.h usability... yes
checking features.h presence... yes
checking for features.h... yes
checking filehdr.h usability... no
checking filehdr.h presence... no
checking for filehdr.h... no
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking mesg.h usability... no
checking mesg.h presence... no
checking for mesg.h... no
checking malloc.h usability... yes
checking malloc.h presence... yes
checking for malloc.h... yes
checking for mesg.h... (cached) no
checking netinet/in.h usability... yes
checking netinet/in.h presence... yes
checking for netinet/in.h... yes
checking nl_types.h usability... yes
checking nl_types.h presence... yes
checking for nl_types.h... yes
checking pthread.h usability... yes
checking pthread.h presence... yes
checking for pthread.h... yes
checking pwd.h usability... yes
checking pwd.h presence... yes
checking for pwd.h... yes
checking sched.h usability... yes
checking sched.h presence... yes
checking for sched.h... yes
checking signal.h usability... yes
checking signal.h presence... yes
checking for signal.h... yes
checking stdarg.h usability... yes
checking stdarg.h presence... yes
checking for stdarg.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking stropts.h usability... yes
checking stropts.h presence... yes
checking for stropts.h... yes
checking sys/filio.h usability... no
checking sys/filio.h presence... no
checking for sys/filio.h... no
checking sys/ldr.h usability... no
checking sys/ldr.h presence... no
checking for sys/ldr.h... no
checking sys/resource.h usability... yes
checking sys/resource.h presence... yes
checking for sys/resource.h... yes
checking sys/select.h usability... yes
checking sys/select.h presence... yes
checking for sys/select.h... yes
checking sys/sem.h usability... yes
checking sys/sem.h presence... yes
checking for sys/sem.h... yes
checking sys/signal.h usability... yes
checking sys/signal.h presence... yes
checking for sys/signal.h... yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking sys/utsname.h usability... yes
checking sys/utsname.h presence... yes
checking for sys/utsname.h... yes
checking sys/wait.h usability... yes
checking sys/wait.h presence... yes
checking for sys/wait.h... yes
checking time.h usability... yes
checking time.h presence... yes
checking for time.h... yes
checking for unistd.h... (cached) yes
checking usersec.h usability... no
checking usersec.h presence... no
checking for usersec.h... no
checking for error_at_line... yes
checking for vprintf... yes
checking for _doprnt... no
checking whether time.h and sys/time.h may both be included... yes
checking for IDtouser... no
checking for getuserattr... no
checking for catopen... yes
checking for fstat... yes
checking for gcvt... yes
checking for geteuid... yes
checking for getpgrp... yes
checking for getpwuid... yes
checking for gettimeofday... yes
checking for memset... yes
checking for nsleep... no
checking for setlocale... yes
checking for strdup... yes
checking for sighold... yes
checking for sigprocmask... yes
checking for nanosleep... yes
checking for pthread_mutexattr_settype... no
checking for pthread_mutexattr_settype in -lpthread... yes
checking if union semun is incorrectly defined... no
checking which values are valid for pthread_mutexattr_settype arg 2 are valid... found
checking if FILE struct contains _cnt member... no
checking if FILE struct contains _IO_read_ptr member... yes
checking for rpmbuild... /usr/bin/rpmbuild
checking for gencat... /usr/bin/gencat
checking for Xalan... no
checking for xalan... no
configure: WARNING: cannot find xalan, Xalan
Subversion revision: 5744
ooRexx major number: 4
ooRexx minor number: 1
ooRexx mod level number: 0
ooRexx current number: 4
ooRexx revision number: 2
ooRexx age number: 0
configure: creating ./config.status
config.status: creating Makefile
config.status: creating platform/unix/oorexx.spec
config.status: creating platform/unix/debian/changelog
config.status: creating platform/unix/debian/postinst
config.status: creating rexxapi/server/platform/unix/rxapid
config.status: creating samples/Makefile
config.status: creating samples/unix/Makefile
config.status: creating samples/unix/api/Makefile
config.status: creating samples/unix/api/callrexx/Makefile
config.status: creating samples/unix/api/wpipe1/Makefile
config.status: creating samples/unix/api/wpipe2/Makefile
config.status: creating samples/unix/api/wpipe3/Makefile
config.status: creating samples/windows/Makefile
config.status: creating samples/windows/api/Makefile
config.status: creating samples/windows/api/callrxnt/Makefile
config.status: creating samples/windows/api/callrxwn/Makefile
config.status: creating samples/windows/api/rexxexit/Makefile
config.status: creating samples/windows/api/wpipe/Makefile
config.status: creating samples/windows/api/wpipe/wpipe1/Makefile
config.status: creating samples/windows/api/wpipe/wpipe2/Makefile
config.status: creating samples/windows/api/wpipe/wpipe3/Makefile
config.status: creating samples/windows/misc/Makefile
config.status: creating samples/windows/ole/Makefile
config.status: creating samples/windows/ole/adsi/Makefile
config.status: creating samples/windows/ole/apps/Makefile
config.status: creating samples/windows/ole/methinfo/Makefile
config.status: creating samples/windows/ole/oleinfo/Makefile
config.status: creating samples/windows/ole/wmi/Makefile
config.status: creating samples/windows/ole/wmi/sysinfo/Makefile
config.status: creating samples/windows/oodialog/Makefile
config.status: creating samples/windows/oodialog/bmp/Makefile
config.status: creating samples/windows/oodialog/controls/Makefile
config.status: creating samples/windows/oodialog/examples/Makefile
config.status: creating samples/windows/oodialog/examples/resources/Makefile
config.status: creating samples/windows/oodialog/ooRexxTry/Makefile
config.status: creating samples/windows/oodialog/ooRexxTry/doc/Makefile
config.status: creating samples/windows/oodialog/rc/Makefile
config.status: creating samples/windows/oodialog/res/Makefile
config.status: creating samples/windows/oodialog/simple/Makefile
config.status: creating samples/windows/oodialog/tutorial/Makefile
config.status: creating samples/windows/oodialog/wav/Makefile
config.status: creating samples/windows/rexutils/Makefile
config.status: creating samples/windows/winsystem/Makefile
config.status: creating samples/windows/wsh/Makefile
config.status: creating xsl.sh
config.status: creating platform/unix/oorexx-config
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
ulmo:~/ooRexx/main/trunk # make rpm
sh ./xsl.sh interpreter/behaviour/PrimitiveBehaviours.cpp ./interpreter/behaviour/PrimitiveClasses.xml ./interpreter/behaviour/PrimitiveBehaviours.xsl
sh ./xsl.sh interpreter/behaviour/VirtualFunctionTable.cpp ./interpreter/behaviour/PrimitiveClasses.xml ./interpreter/behaviour/VirtualFunctionTable.xsl
sh ./xsl.sh interpreter/messages/DocErrorMessages.sgml ./interpreter/messages/rexxmsg.xml ./interpreter/messages/DocBookErrors.xsl
sh ./xsl.sh interpreter/messages/RexxErrorCodes.h ./interpreter/messages/rexxmsg.xml ./interpreter/messages/RexxErrorCodes.xsl
sh ./xsl.sh interpreter/messages/RexxMessageTable.h ./interpreter/messages/rexxmsg.xml ./interpreter/messages/RexxMessageTable.xsl
sh ./xsl.sh interpreter/messages/gencat.inp ./interpreter/messages/rexxmsg.xml ./interpreter/platform/unix/UnixGencat.xsl
{ test ! -d "ooRexx-4.1.0" || { find "ooRexx-4.1.0" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -fr "ooRexx-4.1.0"; }; }
test -d "ooRexx-4.1.0" || mkdir "ooRexx-4.1.0"
(cd samples && make top_distdir=../ooRexx-4.1.0 distdir=../ooRexx-4.1.0/samples \
amremove_distdir=: amskip_length_check=: amskip_mode_fix=: distdir)
make[1]: Entering directory
/root/ooRexx/main/trunk/samples' (cd unix && make top_distdir=../../ooRexx-4.1.0 distdir=../../ooRexx-4.1.0/samples/unix \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[2]: Entering directory
/root/ooRexx/main/trunk/samples/unix'(cd api && make top_distdir=../../../ooRexx-4.1.0 distdir=../../../ooRexx-4.1.0/samples/unix/api \
amremove_distdir=: amskip_length_check=: amskip_mode_fix=: distdir)
make[3]: Entering directory
/root/ooRexx/main/trunk/samples/unix/api' (cd callrexx && make top_distdir=../../../../ooRexx-4.1.0 distdir=../../../../ooRexx-4.1.0/samples/unix/api/callrexx \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[4]: Entering directory
/root/ooRexx/main/trunk/samples/unix/api/callrexx'make[4]: Leaving directory
/root/ooRexx/main/trunk/samples/unix/api/callrexx' (cd wpipe1 && make top_distdir=../../../../ooRexx-4.1.0 distdir=../../../../ooRexx-4.1.0/samples/unix/api/wpipe1 \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[4]: Entering directory
/root/ooRexx/main/trunk/samples/unix/api/wpipe1'make[4]: Leaving directory
/root/ooRexx/main/trunk/samples/unix/api/wpipe1' (cd wpipe2 && make top_distdir=../../../../ooRexx-4.1.0 distdir=../../../../ooRexx-4.1.0/samples/unix/api/wpipe2 \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[4]: Entering directory
/root/ooRexx/main/trunk/samples/unix/api/wpipe2'make[4]: Leaving directory
/root/ooRexx/main/trunk/samples/unix/api/wpipe2' (cd wpipe3 && make top_distdir=../../../../ooRexx-4.1.0 distdir=../../../../ooRexx-4.1.0/samples/unix/api/wpipe3 \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[4]: Entering directory
/root/ooRexx/main/trunk/samples/unix/api/wpipe3'make[4]: Leaving directory
/root/ooRexx/main/trunk/samples/unix/api/wpipe3' make[3]: Leaving directory
/root/ooRexx/main/trunk/samples/unix/api'make[2]: Leaving directory
/root/ooRexx/main/trunk/samples/unix' (cd windows && make top_distdir=../../ooRexx-4.1.0 distdir=../../ooRexx-4.1.0/samples/windows \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[2]: Entering directory
/root/ooRexx/main/trunk/samples/windows'(cd api && make top_distdir=../../../ooRexx-4.1.0 distdir=../../../ooRexx-4.1.0/samples/windows/api \
amremove_distdir=: amskip_length_check=: amskip_mode_fix=: distdir)
make[3]: Entering directory
/root/ooRexx/main/trunk/samples/windows/api' (cd callrxnt && make top_distdir=../../../../ooRexx-4.1.0 distdir=../../../../ooRexx-4.1.0/samples/windows/api/callrxnt \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[4]: Entering directory
/root/ooRexx/main/trunk/samples/windows/api/callrxnt'make[4]: Leaving directory
/root/ooRexx/main/trunk/samples/windows/api/callrxnt' (cd callrxwn && make top_distdir=../../../../ooRexx-4.1.0 distdir=../../../../ooRexx-4.1.0/samples/windows/api/callrxwn \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[4]: Entering directory
/root/ooRexx/main/trunk/samples/windows/api/callrxwn'make[4]: Leaving directory
/root/ooRexx/main/trunk/samples/windows/api/callrxwn' (cd rexxexit && make top_distdir=../../../../ooRexx-4.1.0 distdir=../../../../ooRexx-4.1.0/samples/windows/api/rexxexit \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[4]: Entering directory
/root/ooRexx/main/trunk/samples/windows/api/rexxexit'make[4]: Leaving directory
/root/ooRexx/main/trunk/samples/windows/api/rexxexit' (cd wpipe && make top_distdir=../../../../ooRexx-4.1.0 distdir=../../../../ooRexx-4.1.0/samples/windows/api/wpipe \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[4]: Entering directory
/root/ooRexx/main/trunk/samples/windows/api/wpipe'(cd wpipe1 && make top_distdir=../../../../../ooRexx-4.1.0 distdir=../../../../../ooRexx-4.1.0/samples/windows/api/wpipe/wpipe1 \
amremove_distdir=: amskip_length_check=: amskip_mode_fix=: distdir)
make[5]: Entering directory
/root/ooRexx/main/trunk/samples/windows/api/wpipe/wpipe1' make[5]: Leaving directory
/root/ooRexx/main/trunk/samples/windows/api/wpipe/wpipe1'(cd wpipe2 && make top_distdir=../../../../../ooRexx-4.1.0 distdir=../../../../../ooRexx-4.1.0/samples/windows/api/wpipe/wpipe2 \
amremove_distdir=: amskip_length_check=: amskip_mode_fix=: distdir)
make[5]: Entering directory
/root/ooRexx/main/trunk/samples/windows/api/wpipe/wpipe2' make[5]: Leaving directory
/root/ooRexx/main/trunk/samples/windows/api/wpipe/wpipe2'(cd wpipe3 && make top_distdir=../../../../../ooRexx-4.1.0 distdir=../../../../../ooRexx-4.1.0/samples/windows/api/wpipe/wpipe3 \
amremove_distdir=: amskip_length_check=: amskip_mode_fix=: distdir)
make[5]: Entering directory
/root/ooRexx/main/trunk/samples/windows/api/wpipe/wpipe3' make[5]: Leaving directory
/root/ooRexx/main/trunk/samples/windows/api/wpipe/wpipe3'make[4]: Leaving directory
/root/ooRexx/main/trunk/samples/windows/api/wpipe' make[3]: Leaving directory
/root/ooRexx/main/trunk/samples/windows/api'(cd misc && make top_distdir=../../../ooRexx-4.1.0 distdir=../../../ooRexx-4.1.0/samples/windows/misc \
amremove_distdir=: amskip_length_check=: amskip_mode_fix=: distdir)
make[3]: Entering directory
/root/ooRexx/main/trunk/samples/windows/misc' make[3]: Leaving directory
/root/ooRexx/main/trunk/samples/windows/misc'(cd ole && make top_distdir=../../../ooRexx-4.1.0 distdir=../../../ooRexx-4.1.0/samples/windows/ole \
amremove_distdir=: amskip_length_check=: amskip_mode_fix=: distdir)
make[3]: Entering directory
/root/ooRexx/main/trunk/samples/windows/ole' (cd adsi && make top_distdir=../../../../ooRexx-4.1.0 distdir=../../../../ooRexx-4.1.0/samples/windows/ole/adsi \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[4]: Entering directory
/root/ooRexx/main/trunk/samples/windows/ole/adsi'make[4]: Leaving directory
/root/ooRexx/main/trunk/samples/windows/ole/adsi' (cd apps && make top_distdir=../../../../ooRexx-4.1.0 distdir=../../../../ooRexx-4.1.0/samples/windows/ole/apps \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[4]: Entering directory
/root/ooRexx/main/trunk/samples/windows/ole/apps'make[4]: Leaving directory
/root/ooRexx/main/trunk/samples/windows/ole/apps' (cd methinfo && make top_distdir=../../../../ooRexx-4.1.0 distdir=../../../../ooRexx-4.1.0/samples/windows/ole/methinfo \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[4]: Entering directory
/root/ooRexx/main/trunk/samples/windows/ole/methinfo'make[4]: Leaving directory
/root/ooRexx/main/trunk/samples/windows/ole/methinfo' (cd oleinfo && make top_distdir=../../../../ooRexx-4.1.0 distdir=../../../../ooRexx-4.1.0/samples/windows/ole/oleinfo \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[4]: Entering directory
/root/ooRexx/main/trunk/samples/windows/ole/oleinfo'make[4]: Leaving directory
/root/ooRexx/main/trunk/samples/windows/ole/oleinfo' (cd wmi && make top_distdir=../../../../ooRexx-4.1.0 distdir=../../../../ooRexx-4.1.0/samples/windows/ole/wmi \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[4]: Entering directory
/root/ooRexx/main/trunk/samples/windows/ole/wmi'(cd sysinfo && make top_distdir=../../../../../ooRexx-4.1.0 distdir=../../../../../ooRexx-4.1.0/samples/windows/ole/wmi/sysinfo \
amremove_distdir=: amskip_length_check=: amskip_mode_fix=: distdir)
make[5]: Entering directory
/root/ooRexx/main/trunk/samples/windows/ole/wmi/sysinfo' make[5]: Leaving directory
/root/ooRexx/main/trunk/samples/windows/ole/wmi/sysinfo'make[4]: Leaving directory
/root/ooRexx/main/trunk/samples/windows/ole/wmi' make[3]: Leaving directory
/root/ooRexx/main/trunk/samples/windows/ole'(cd oodialog && make top_distdir=../../../ooRexx-4.1.0 distdir=../../../ooRexx-4.1.0/samples/windows/oodialog \
amremove_distdir=: amskip_length_check=: amskip_mode_fix=: distdir)
make[3]: Entering directory
/root/ooRexx/main/trunk/samples/windows/oodialog' (cd bmp && make top_distdir=../../../../ooRexx-4.1.0 distdir=../../../../ooRexx-4.1.0/samples/windows/oodialog/bmp \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[4]: Entering directory
/root/ooRexx/main/trunk/samples/windows/oodialog/bmp'make[4]: Leaving directory
/root/ooRexx/main/trunk/samples/windows/oodialog/bmp' (cd controls && make top_distdir=../../../../ooRexx-4.1.0 distdir=../../../../ooRexx-4.1.0/samples/windows/oodialog/controls \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[4]: Entering directory
/root/ooRexx/main/trunk/samples/windows/oodialog/controls'make[4]: Leaving directory
/root/ooRexx/main/trunk/samples/windows/oodialog/controls' (cd examples && make top_distdir=../../../../ooRexx-4.1.0 distdir=../../../../ooRexx-4.1.0/samples/windows/oodialog/examples \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[4]: Entering directory
/root/ooRexx/main/trunk/samples/windows/oodialog/examples'(cd resources && make top_distdir=../../../../../ooRexx-4.1.0 distdir=../../../../../ooRexx-4.1.0/samples/windows/oodialog/examples/resources \
amremove_distdir=: amskip_length_check=: amskip_mode_fix=: distdir)
make[5]: Entering directory
/root/ooRexx/main/trunk/samples/windows/oodialog/examples/resources' make[5]: Leaving directory
/root/ooRexx/main/trunk/samples/windows/oodialog/examples/resources'make[4]: Leaving directory
/root/ooRexx/main/trunk/samples/windows/oodialog/examples' (cd ooRexxTry && make top_distdir=../../../../ooRexx-4.1.0 distdir=../../../../ooRexx-4.1.0/samples/windows/oodialog/ooRexxTry \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[4]: Entering directory
/root/ooRexx/main/trunk/samples/windows/oodialog/ooRexxTry'(cd doc && make top_distdir=../../../../../ooRexx-4.1.0 distdir=../../../../../ooRexx-4.1.0/samples/windows/oodialog/ooRexxTry/doc \
amremove_distdir=: amskip_length_check=: amskip_mode_fix=: distdir)
make[5]: Entering directory
/root/ooRexx/main/trunk/samples/windows/oodialog/ooRexxTry/doc' make[5]: Leaving directory
/root/ooRexx/main/trunk/samples/windows/oodialog/ooRexxTry/doc'make[4]: Leaving directory
/root/ooRexx/main/trunk/samples/windows/oodialog/ooRexxTry' (cd rc && make top_distdir=../../../../ooRexx-4.1.0 distdir=../../../../ooRexx-4.1.0/samples/windows/oodialog/rc \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[4]: Entering directory
/root/ooRexx/main/trunk/samples/windows/oodialog/rc'make[4]: Leaving directory
/root/ooRexx/main/trunk/samples/windows/oodialog/rc' (cd res && make top_distdir=../../../../ooRexx-4.1.0 distdir=../../../../ooRexx-4.1.0/samples/windows/oodialog/res \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[4]: Entering directory
/root/ooRexx/main/trunk/samples/windows/oodialog/res'make[4]: Leaving directory
/root/ooRexx/main/trunk/samples/windows/oodialog/res' (cd simple && make top_distdir=../../../../ooRexx-4.1.0 distdir=../../../../ooRexx-4.1.0/samples/windows/oodialog/simple \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[4]: Entering directory
/root/ooRexx/main/trunk/samples/windows/oodialog/simple'make[4]: Leaving directory
/root/ooRexx/main/trunk/samples/windows/oodialog/simple' (cd tutorial && make top_distdir=../../../../ooRexx-4.1.0 distdir=../../../../ooRexx-4.1.0/samples/windows/oodialog/tutorial \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[4]: Entering directory
/root/ooRexx/main/trunk/samples/windows/oodialog/tutorial'make[4]: Leaving directory
/root/ooRexx/main/trunk/samples/windows/oodialog/tutorial' (cd wav && make top_distdir=../../../../ooRexx-4.1.0 distdir=../../../../ooRexx-4.1.0/samples/windows/oodialog/wav \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[4]: Entering directory
/root/ooRexx/main/trunk/samples/windows/oodialog/wav'make[4]: Leaving directory
/root/ooRexx/main/trunk/samples/windows/oodialog/wav' make[3]: Leaving directory
/root/ooRexx/main/trunk/samples/windows/oodialog'(cd rexutils && make top_distdir=../../../ooRexx-4.1.0 distdir=../../../ooRexx-4.1.0/samples/windows/rexutils \
amremove_distdir=: amskip_length_check=: amskip_mode_fix=: distdir)
make[3]: Entering directory
/root/ooRexx/main/trunk/samples/windows/rexutils' make[3]: Leaving directory
/root/ooRexx/main/trunk/samples/windows/rexutils'(cd winsystem && make top_distdir=../../../ooRexx-4.1.0 distdir=../../../ooRexx-4.1.0/samples/windows/winsystem \
amremove_distdir=: amskip_length_check=: amskip_mode_fix=: distdir)
make[3]: Entering directory
/root/ooRexx/main/trunk/samples/windows/winsystem' make[3]: Leaving directory
/root/ooRexx/main/trunk/samples/windows/winsystem'(cd wsh && make top_distdir=../../../ooRexx-4.1.0 distdir=../../../ooRexx-4.1.0/samples/windows/wsh \
amremove_distdir=: amskip_length_check=: am__skip_mode_fix=: distdir)
make[3]: Entering directory
/root/ooRexx/main/trunk/samples/windows/wsh' make[3]: Leaving directory
/root/ooRexx/main/trunk/samples/windows/wsh'make[2]: Leaving directory
/root/ooRexx/main/trunk/samples/windows' make[1]: Leaving directory
/root/ooRexx/main/trunk/samples'make \
top_distdir="ooRexx-4.1.0" distdir="ooRexx-4.1.0" \
dist-hook
make[1]: Entering directory
/root/ooRexx/main/trunk' rm -fr
find ooRexx-4.1.0 -name .svnrm -fr
find ooRexx-4.1.0 -name ".bak"rm -fr
find ooRexx-4.1.0 -name ".o"rm -fr
find ooRexx-4.1.0 -name "*.lo"touch ooRexx-4.1.0/interpreter/messages/*.h touch ooRexx-4.1.0/api/oorexxerrors.h touch ooRexx-4.1.0/interpreter/messages/DocErrorMessages.sgml touch ooRexx-4.1.0/interpreter/messages/gencat.inp sed -e '/ORX_BLD_LVL/s/1$/5744/;/ORX_VER_STR/s/\.1\"$/.5744\"/' oorexx.ver > oorexx.ver.incl echo 'SVN_REVSION=5744' >> oorexx.ver.incl cp ./oorexx.ver.incl ooRexx-4.1.0 rm -f oorexx.ver.incl make[1]: Leaving directory
/root/ooRexx/main/trunk'test -n "" \
|| find "ooRexx-4.1.0" -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec /bin/sh /root/ooRexx/main/trunk/install-sh -c -m a+r {} {} \; \
|| chmod -R a+r "ooRexx-4.1.0"
tardir=ooRexx-4.1.0 && /bin/sh /root/ooRexx/main/trunk/missing --run tar chof - "$tardir" | GZIP=--best gzip -c >ooRexx-4.1.0.tar.gz
rm -f ooRexx-4.1.0.zip
zip -rq ooRexx-4.1.0.zip ooRexx-4.1.0
{ test ! -d "ooRexx-4.1.0" || { find "ooRexx-4.1.0" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -fr "ooRexx-4.1.0"; }; }
rm -fr ./rpm
mkdir rpm
mkdir rpm/BUILD
mkdir rpm/RPMS
mkdir rpm/SOURCES
mkdir rpm/SPECS
mkdir rpm/SRPMS
rpmbuild -ba ./platform/unix/oorexx.spec < /dev/null;
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.13DFEE
+ umask 022
+ cd /root/ooRexx/main/trunk/rpm/BUILD
+ cd /root/ooRexx/main/trunk/rpm/BUILD
+ rm -rf ooRexx-4.1.0
+ /usr/bin/gzip -dc /root/ooRexx/main/trunk/ooRexx-4.1.0.tar.gz
+ /bin/tar -xf -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd ooRexx-4.1.0
+ /bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ exit 0
Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.iHKSa1
+ umask 022
+ cd /root/ooRexx/main/trunk/rpm/BUILD
+ /bin/rm -rf /usr/src/packages/BUILDROOT/ooRexx-4.1.0-5744.x86_64
++ dirname /usr/src/packages/BUILDROOT/ooRexx-4.1.0-5744.x86_64
+ /bin/mkdir -p /usr/src/packages/BUILDROOT
+ /bin/mkdir /usr/src/packages/BUILDROOT/ooRexx-4.1.0-5744.x86_64
+ cd ooRexx-4.1.0
+ ./configure --disable-static --prefix=/opt/ooRexx
checking build system type... x86_64-suse-linux-gnu
checking host system type... x86_64-suse-linux-gnu
checking target system type... x86_64-suse-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking for a BSD-compatible install... /usr/bin/install -c
checking whether make sets $(MAKE)... (cached) yes
checking for ranlib... ranlib
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/x86_64-suse-linux/bin/ld
checking if the linker (/usr/x86_64-suse-linux/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 3458764513820540925
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking for /usr/x86_64-suse-linux/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for ar... ar
checking for strip... strip
checking for ranlib... (cached) ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking whether we are using the GNU C++ compiler... (cached) yes
checking whether g++ accepts -g... (cached) yes
checking dependency style of g++... (cached) gcc3
checking how to run the C++ preprocessor... g++ -E
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/x86_64-suse-linux/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for shl_load... no
checking for shl_load in -ldld... no
checking for dlopen... no
checking for dlopen in -ldl... yes
checking whether a program can dlopen itself... yes
checking whether a statically linked program can dlopen itself... no
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking for ld used by g++... /usr/x86_64-suse-linux/bin/ld -m elf_x86_64
checking if the linker (/usr/x86_64-suse-linux/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/x86_64-suse-linux/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/x86_64-suse-linux/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether byte ordering is bigendian... no
checking for ANSI C header files... (cached) yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking features.h usability... yes
checking features.h presence... yes
checking for features.h... yes
checking filehdr.h usability... no
checking filehdr.h presence... no
checking for filehdr.h... no
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking mesg.h usability... no
checking mesg.h presence... no
checking for mesg.h... no
checking malloc.h usability... yes
checking malloc.h presence... yes
checking for malloc.h... yes
checking for mesg.h... (cached) no
checking netinet/in.h usability... yes
checking netinet/in.h presence... yes
checking for netinet/in.h... yes
checking nl_types.h usability... yes
checking nl_types.h presence... yes
checking for nl_types.h... yes
checking pthread.h usability... yes
checking pthread.h presence... yes
checking for pthread.h... yes
checking pwd.h usability... yes
checking pwd.h presence... yes
checking for pwd.h... yes
checking sched.h usability... yes
checking sched.h presence... yes
checking for sched.h... yes
checking signal.h usability... yes
checking signal.h presence... yes
checking for signal.h... yes
checking stdarg.h usability... yes
checking stdarg.h presence... yes
checking for stdarg.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking stropts.h usability... yes
checking stropts.h presence... yes
checking for stropts.h... yes
checking sys/filio.h usability... no
checking sys/filio.h presence... no
checking for sys/filio.h... no
checking sys/ldr.h usability... no
checking sys/ldr.h presence... no
checking for sys/ldr.h... no
checking sys/resource.h usability... yes
checking sys/resource.h presence... yes
checking for sys/resource.h... yes
checking sys/select.h usability... yes
checking sys/select.h presence... yes
checking for sys/select.h... yes
checking sys/sem.h usability... yes
checking sys/sem.h presence... yes
checking for sys/sem.h... yes
checking sys/signal.h usability... yes
checking sys/signal.h presence... yes
checking for sys/signal.h... yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking sys/utsname.h usability... yes
checking sys/utsname.h presence... yes
checking for sys/utsname.h... yes
checking sys/wait.h usability... yes
checking sys/wait.h presence... yes
checking for sys/wait.h... yes
checking time.h usability... yes
checking time.h presence... yes
checking for time.h... yes
checking for unistd.h... (cached) yes
checking usersec.h usability... no
checking usersec.h presence... no
checking for usersec.h... no
checking for error_at_line... yes
checking for vprintf... yes
checking for _doprnt... no
checking whether time.h and sys/time.h may both be included... yes
checking for IDtouser... no
checking for getuserattr... no
checking for catopen... yes
checking for fstat... yes
checking for gcvt... yes
checking for geteuid... yes
checking for getpgrp... yes
checking for getpwuid... yes
checking for gettimeofday... yes
checking for memset... yes
checking for nsleep... no
checking for setlocale... yes
checking for strdup... yes
checking for sighold... yes
checking for sigprocmask... yes
checking for nanosleep... yes
checking for pthread_mutexattr_settype... no
checking for pthread_mutexattr_settype in -lpthread... yes
checking if union semun is incorrectly defined... no
checking which values are valid for pthread_mutexattr_settype arg 2 are valid... found
checking if FILE struct contains _cnt member... no
checking if FILE struct contains _IO_read_ptr member... yes
checking for rpmbuild... /usr/bin/rpmbuild
checking for gencat... /usr/bin/gencat
checking for Xalan... no
checking for xalan... no
configure: WARNING: cannot find xalan, Xalan
configure: WARNING: setting Subversion Revision to 0
Subversion revision: 0
ooRexx major number: 4
ooRexx minor number: 1
ooRexx mod level number: 0
ooRexx current number: 4
ooRexx revision number: 2
ooRexx age number: 0
configure: creating ./config.status
config.status: creating Makefile
config.status: creating platform/unix/oorexx.spec
config.status: creating platform/unix/debian/changelog
config.status: creating platform/unix/debian/postinst
config.status: creating rexxapi/server/platform/unix/rxapid
config.status: creating samples/Makefile
config.status: creating samples/unix/Makefile
config.status: creating samples/unix/api/Makefile
config.status: creating samples/unix/api/callrexx/Makefile
config.status: creating samples/unix/api/wpipe1/Makefile
config.status: creating samples/unix/api/wpipe2/Makefile
config.status: creating samples/unix/api/wpipe3/Makefile
config.status: creating samples/windows/Makefile
config.status: creating samples/windows/api/Makefile
config.status: creating samples/windows/api/callrxnt/Makefile
config.status: creating samples/windows/api/callrxwn/Makefile
config.status: creating samples/windows/api/rexxexit/Makefile
config.status: creating samples/windows/api/wpipe/Makefile
config.status: creating samples/windows/api/wpipe/wpipe1/Makefile
config.status: creating samples/windows/api/wpipe/wpipe2/Makefile
config.status: creating samples/windows/api/wpipe/wpipe3/Makefile
config.status: creating samples/windows/misc/Makefile
config.status: creating samples/windows/ole/Makefile
config.status: creating samples/windows/ole/adsi/Makefile
config.status: creating samples/windows/ole/apps/Makefile
config.status: creating samples/windows/ole/methinfo/Makefile
config.status: creating samples/windows/ole/oleinfo/Makefile
config.status: creating samples/windows/ole/wmi/Makefile
config.status: creating samples/windows/ole/wmi/sysinfo/Makefile
config.status: creating samples/windows/oodialog/Makefile
config.status: creating samples/windows/oodialog/bmp/Makefile
config.status: creating samples/windows/oodialog/controls/Makefile
config.status: creating samples/windows/oodialog/examples/Makefile
config.status: creating samples/windows/oodialog/examples/resources/Makefile
config.status: creating samples/windows/oodialog/ooRexxTry/Makefile
config.status: creating samples/windows/oodialog/ooRexxTry/doc/Makefile
config.status: creating samples/windows/oodialog/rc/Makefile
config.status: creating samples/windows/oodialog/res/Makefile
config.status: creating samples/windows/oodialog/simple/Makefile
config.status: creating samples/windows/oodialog/tutorial/Makefile
config.status: creating samples/windows/oodialog/wav/Makefile
config.status: creating samples/windows/rexutils/Makefile
config.status: creating samples/windows/winsystem/Makefile
config.status: creating samples/windows/wsh/Makefile
config.status: creating xsl.sh
config.status: creating platform/unix/oorexx-config
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
+ make
make[1]: Entering directory
/root/ooRexx/main/trunk/rpm/BUILD/ooRexx-4.1.0' g++ -DHAVE_CONFIG_H -I. -DORX_VER=4 -DORX_REL=1 -DORX_MOD=0 -DORX_FIX=0 -DORX_SYS_STR=\"LINUX\" -DORX_CATDIR=\"/opt/ooRexx/bin\" -DORX_SHARED_LIBRARY_EXT=\".so\" -I./lib -I./api -I./api/platform/unix -g -O2 -g -O2 -Wall -funsigned-char -Wpointer-arith -Wcast-qual -Wcast-align -Wshadow -Wwrite-strings -D__cplusplus -Wredundant-decls -DNOOPT -DPTHREAD_KERNEL -D_POSIX_THREAD -D_REENTRANT -D_GNU_SOURCE -DLINUX -DOPSYS_LINUX -MT rexximage-rexximage.o -MD -MP -MF .deps/rexximage-rexximage.Tpo -c -o rexximage-rexximage.o
test -f './utilities/rexximage/rexximage.cpp' || echo './'./utilities/rexximage/rexximage.cpp mv -f .deps/rexximage-rexximage.Tpo .deps/rexximage-rexximage.Po /bin/sh ./libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -DORX_VER=4 -DORX_REL=1 -DORX_MOD=0 -DORX_FIX=0 -DORX_SYS_STR=\"LINUX\" -DORX_CATDIR=\"/opt/ooRexx/bin\" -DORX_SHARED_LIBRARY_EXT=\".so\" -I./lib -I./api -I./api/platform/unix -I./common -I./common/platform/unix -I./interpreter -I./interpreter/behaviour -I./interpreter/execution -I./interpreter/memory -I./interpreter/package -I./interpreter/concurrency -I./interpreter/expression -I./interpreter/instructions -I./interpreter/classes -I./interpreter/classes/support -I./interpreter/runtime -I./interpreter/parser -I./interpreter/messages -I./interpreter/streamLibrary -I./interpreter/platform/common -I./interpreter/platform/unix -g -O2 -g -O2 -Wall -funsigned-char -Wpointer-arith -Wcast-qual -Wcast-align -Wshadow -Wwrite-strings -D__cplusplus -Wredundant-decls -DNOOPT -DPTHREAD_KERNEL -D_POSIX_THREAD -D_REENTRANT -D_GNU_SOURCE -DLINUX -DOPSYS_LINUX -MT librexx_la-ArrayClass.lo -MD -MP -MF .deps/librexx_la-ArrayClass.Tpo -c -o librexx_la-ArrayClass.lo
test -f './interpreter/classes/ArrayClass.cpp' || echo './'./interpreter/classes/ArrayClass.cpp libtool: compile: g++ -DHAVE_CONFIG_H -I. -DORX_VER=4 -DORX_REL=1 -DORX_MOD=0 -DORX_FIX=0 -DORX_SYS_STR=\"LINUX\" -DORX_CATDIR=\"/opt/ooRexx/bin\" -DORX_SHARED_LIBRARY_EXT=\".so\" -I./lib -I./api -I./api/platform/unix -I./common -I./common/platform/unix -I./interpreter -I./interpreter/behaviour -I./interpreter/execution -I./interpreter/memory -I./interpreter/package -I./interpreter/concurrency -I./interpreter/expression -I./interpreter/instructions -I./interpreter/classes -I./interpreter/classes/support -I./interpreter/runtime -I./interpreter/parser -I./interpreter/messages -I./interpreter/streamLibrary -I./interpreter/platform/common -I./interpreter/platform/unix -g -O2 -g -O2 -Wall -funsigned-char -Wpointer-arith -Wcast-qual -Wcast-align -Wshadow -Wwrite-strings -D__cplusplus -Wredundant-decls -DNOOPT -DPTHREAD_KERNEL -D_POSIX_THREAD -D_REENTRANT -D_GNU_SOURCE -DLINUX -DOPSYS_LINUX -MT librexx_la-ArrayClass.lo -MD -MP -MF .deps/librexx_la-ArrayClass.Tpo -c ./interpreter/classes/ArrayClass.cpp -fPIC -DPIC -o .libs/librexx_la-ArrayClass.o In file included from ./interpreter/expression/ExpressionStack.hpp:48, from ./interpreter/concurrency/RexxActivity.hpp:50, from ./interpreter/runtime/RexxCore.h:243, from ./interpreter/classes/ArrayClass.cpp:70: ./interpreter/classes/ArrayClass.hpp:76: error: ‘boolean’ does not name a type ./interpreter/classes/ArrayClass.cpp: In member function ‘void RexxArray::quickSort(BaseSortComparator&, size_t, size_t)’: ./interpreter/classes/ArrayClass.cpp:2325: error: ‘class PartitionBounds’ has no member named ‘isSmall’ make[1]: *** [librexx_la-ArrayClass.lo] Error 1 make[1]: Leaving directory
/root/ooRexx/main/trunk/rpm/BUILD/ooRexx-4.1.0'error: Bad exit status from /var/tmp/rpm-tmp.iHKSa1 (%build)
RPM build errors:
Bad exit status from /var/tmp/rpm-tmp.iHKSa1 (%build)
make: *** [rpm] Error 1
ulmo:~/ooRexx/main/trunk #
This bug is not a canidate for the 4.0.1 bug fix release.
Rick,
I tested this a couple of weeks agon on several Linux systems and Windows. It seems a good fix to me. It also fixed at least one other bug, maybe a couple of others.
I think you didn't want to include it in 4.0.1 because it hadn't been tested on Linux (you had VM ware problems.)
Take a look and see if it's okay to include in 4.1.0
Committed revision 6253. 4.1.0
The fix for this item was in the 4.1.0 release.