Re: [nwst-dev] Audio on the NS1000

SourceForge Headquarters 1320 Columbia Street Suite 310 San Diego, CA 92101 +1 (858) 422-6466

Hi,
Sorry to be so silent, ive found the serial-bug in my Netstation.... one 
of voltage regulator is slowly died... melting a some chips around.. so 
till i don't fix it or find another one i can only listen to your good 
news ;))
Anyway i saved a dmesg log when the original BSD was runnig ... in which 
u can find the parameter U need.
"wss0 at isa0 port 0x82c-0x833 irq 10 drq 0 drq2 1: CS4231A"
A "sad" regards
Federico

----dmesg---------------------------------------------------------------
 > CPU: PowerPC 603ev (Revision 201)
 > CPU: L2 Cache not fitted
 > real memory  = 33554432 (32768K bytes)
 > avail memory = 28393472 (27728K bytes)
 > using 409 buffers containing 1675264 bytes of memory
 > mainbus0 (root)
 > pci0 at mainbus0
 > pci0: i/o enabled, memory enabled
 > pchb0 at pci0 dev 0 function 0
 > pchb0: vendor 0x1014 product 0x0037 (rev. 0x02)
 > pcib0 at pci0 dev 1 function 0
 > pcib0: vendor 0x1014 product 0x000a (rev. 0x03)
 > lep0 at pci0 dev 2 function 0: PCnet-PCI Ethernet
 > lep0: No serial EEPROM
 > lep0: interrupting at irq 15
 > lep0: ether addr 00:00:a7:23:01:64
 > lep0: 32 receive buffers, 32 transmit buffers
 > icsphy0 at lep0 phy 0: ICS1890 10/100 media interface, rev. 3
 > icsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 > OUI 0x00001a model 0x0001 rev 1 at lep0 phy 31 not configured
 > pcic0 at pci0 dev 3 function 0
 > pcic0: vendor 0x104c product 0xac15 (rev. 0x01)
 > pcic0: can't map i/o space
 > vendor 0x104c product 0xac15 (CardBus bridge, revision 0x01) at pci0 dev
 > 3 function 1 not configured
 > vgafb0 at pci0 dev 4 function 0: 1024 x 384, 8bpp
 > wsdisplay0 at vgafb0: console (std, vt100 emulation)
 > isa0 at pcib0
 > com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
 > com5 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
 > lpt0 at isa0 port 0x378-0x37b irq 7
 > wss0 at isa0 port 0x82c-0x833 irq 10 drq 0 drq2 1: CS4231A
 > audio0 at wss0: full duplex
 > pckbc0 at isa0 port 0x60-0x64
 > pckbd0 at pckbc0 (kbd slot)
 > pckbc0: using irq 1 for kbd slot
 > wskbd0 at pckbd0: console keyboard
 > pms0 at pckbc0 (aux slot)
 > pckbc0: using irq 12 for aux slot
 > wsmouse0 at pms0
 > wslpn0 at pms0
 > pcppi0 at isa0 port 0x61
 > sysbeep0 at pcppi0
 > ppi_attached = 1
 > atnvram0 at isa0 port 0x804-0xe69
 > nvram0 at atnvram0
 > low_ram->boot_source = 2
 > biomask 0 netmask 8000 ttymask 9082
 > rfs driver level: 19991105
 > unknown device major 0xfff00
 > Trying device ppp1
 > unknown device major 0xfff00
 > Trying device ppp0
 > Trying device lep0
 > RFS root not mounted. errno=53 (10.0.0.52:/usr/netstation-ppc/ppc)
 > arp info overwritten for 10.0.0.52 by 00:60:08:0e:86:02
 > nfs_boot: timeout...
 > nfs_boot: timeout...
 > nfs_boot: timeout...
 > nfs_boot: mountd error=60
 > nfs_boot: mountd `10.0.0.52:/usr/netstation-ppc/ppc', error=60
 > no file system for lep0
 > Cannot mount root device lep0, error = 79
 > unknown device major 0xfff00
 > Trying device ppp1
 > unknown device major 0xfff00
 > Trying device ppp0
 > Trying device lep0
 > arp info overwritten for 10.0.0.52 by 01:a0:24:ea:3d:9a
 > RFS root not mounted. errno=53 (10.0.0.52:/usr/netstation-ppc/ppc)
 > arp info overwritten for 10.0.0.52 by 01:a0:24:ea:3d:9a
 > root on 10.0.0.52:/usr/netstation-ppc/ppc
 > root file system type: nfs
 > arp info overwritten for 10.0.0.52 by 00:60:08:0e:86:02
 > arp info overwritten for 10.0.0.52 by 01:a0:24:ea:3d:9a
 > ----dmesg---------------------------------------------------------------

Santiago Garcia Mantinan wrote:

>Hi!
>
>I'm trying to work out how to make this thing work, we have a CS4231A-KQ.
>
>The first problem would be which driver to use for this chip, the thing is
>that searching at google, this chip doesn't seem to be alone on a card, the
>cards usually have a DSP or some other things as for the CS4231 seems just
>to be a codec :-? Depending on the card you need one driver or another, so I
>really don't know which one to use.
>
>Jochen sugests to use the CS4232 driver, but you can read on it:
>
> * The low level driver for Crystal CS4232 based cards. The CS4232 is
> * a PnP compatible chip which contains a CS4231A codec, SB emulation,
> * a MPU401 compatible MIDI port, joystick and synthesizer and IDE CD-ROM 
> * interfaces. This is just a temporary driver until full PnP support
> * gets implemented. Just the WSS codec, FM synth and the MIDI ports are
> * supported. Other interfaces are left uninitialized.
>
>So, the CS4232 seems to be a chip that has a CS4231A inside, ok, maybe this
>one works, it seems to be the best one at least looking on the kernel, don't
>know for ALSA. I know it compiles, that's a good start ;-)
>
>Now, the second problem is that this driver needs the IO, IRQ and DMA for
>the card, and I don't know how or where to get this info from, so...
>is there anybody that may guess this? maybe one can use NetBSD for getting
>this values? (Berto, you have that BSD thing running there, can you try to
>find this values?)
>
>Well, hope you can help a bit with this, as for me, having sound and 16 bpp
>are the things we are missing the most.
>
>Regards!
>
>
>
>-------------------------------------------------------
>This SF.net email is sponsored by: Get the new Palm Tungsten T 
>handheld. Power & Color in a compact size! 
>http://ads.sourceforge.net/cgi-bin/redirect.pl?palm0002en
>_______________________________________________
>Networkstation-developers mailing list
>Net...@li...
>https://lists.sourceforge.net/lists/listinfo/networkstation-developers
>