[Netnice-commitlog] netnice : Linux/arch/arm/mach-ixp2000 Kconfig,1.1.1.1,1.1.1.1.6.1 Makefile,1.1.1
Status: Alpha
Brought to you by:
taost6
Menu
▾
▴
[Netnice-commitlog] netnice : Linux/arch/arm/mach-ixp2000 Kconfig,1.1.1.1,1.1.1.1.6.1 Makefile,1.1.1.1,1.1.1.1.6.1 core.c,1.1.1.1,1.1.1.1.6.1 enp2611.c,1.1.1.1,1.1.1.1.6.1 ixdp2400.c,1.1.1.1,1.1.1.1.6.1 ixdp2800.c,1.1.1.1,1.1.1.1.6.1 ixdp2x00.c,1.1.1.1,1.1.1.1.6.1 ixdp2x01.c,1.1.1.1,1.1.1.1.6.1 pci.c,1.1.1.1,1.1.1.1.6.1
|
From: bhatt k. m. <rou...@us...> - 2006-02-16 10:14:02
|
Update of /cvsroot/netnice/Linux/arch/arm/mach-ixp2000 In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv2102/mach-ixp2000 Modified Files: Tag: netnice2615 Kconfig Makefile core.c enp2611.c ixdp2400.c ixdp2800.c ixdp2x00.c ixdp2x01.c pci.c Log Message: netnice patch updated to linux kernel 2.6.15. --Kartikey BHATT Index: core.c =================================================================== RCS file: /cvsroot/netnice/Linux/arch/arm/mach-ixp2000/core.c,v retrieving revision 1.1.1.1 retrieving revision 1.1.1.1.6.1 diff -u -d -r1.1.1.1 -r1.1.1.1.6.1 --- core.c 5 Nov 2005 19:53:04 -0000 1.1.1.1 +++ core.c 16 Feb 2006 10:13:15 -0000 1.1.1.1.6.1 @@ -1,5 +1,5 @@ /* - * arch/arm/mach-ixp2000/common.c + * arch/arm/mach-ixp2000/core.c * * Common routines used by all IXP2400/2800 based platforms. * @@ -23,14 +23,13 @@ #include <linux/serial.h> #include <linux/tty.h> #include <linux/bitops.h> -#include <linux/serial_core.h> +#include <linux/serial_8250.h> #include <linux/mm.h> #include <asm/types.h> #include <asm/setup.h> #include <asm/memory.h> #include <asm/hardware.h> -#include <asm/mach-types.h> #include <asm/irq.h> #include <asm/system.h> #include <asm/tlbflush.h> @@ -40,6 +39,8 @@ #include <asm/mach/time.h> #include <asm/mach/irq.h> +#include <asm/arch/gpio.h> + static DEFINE_SPINLOCK(ixp2000_slowport_lock); static unsigned long ixp2000_slowport_irq_flags; @@ -48,7 +49,6 @@ *************************************************************************/ void ixp2000_acquire_slowport(struct slowport_cfg *new_cfg, struct slowport_cfg *old_cfg) { - spin_lock_irqsave(&ixp2000_slowport_lock, ixp2000_slowport_irq_flags); old_cfg->CCR = *IXP2000_SLOWPORT_CCR; @@ -61,7 +61,7 @@ ixp2000_reg_write(IXP2000_SLOWPORT_WTC2, new_cfg->WTC); ixp2000_reg_write(IXP2000_SLOWPORT_RTC2, new_cfg->RTC); ixp2000_reg_write(IXP2000_SLOWPORT_PCR, new_cfg->PCR); - ixp2000_reg_write(IXP2000_SLOWPORT_ADC, new_cfg->ADC); + ixp2000_reg_wrb(IXP2000_SLOWPORT_ADC, new_cfg->ADC); } void ixp2000_release_slowport(struct slowport_cfg *old_cfg) @@ -70,7 +70,7 @@ ixp2000_reg_write(IXP2000_SLOWPORT_WTC2, old_cfg->WTC); ixp2000_reg_write(IXP2000_SLOWPORT_RTC2, old_cfg->RTC); ixp2000_reg_write(IXP2000_SLOWPORT_PCR, old_cfg->PCR); - ixp2000_reg_write(IXP2000_SLOWPORT_ADC, old_cfg->ADC); + ixp2000_reg_wrb(IXP2000_SLOWPORT_ADC, old_cfg->ADC); spin_unlock_irqrestore(&ixp2000_slowport_lock, ixp2000_slowport_irq_flags); @@ -82,92 +82,114 @@ static struct map_desc ixp2000_io_desc[] __initdata = { { .virtual = IXP2000_CAP_VIRT_BASE, - .physical = IXP2000_CAP_PHYS_BASE, + .pfn = __phys_to_pfn(IXP2000_CAP_PHYS_BASE), .length = IXP2000_CAP_SIZE, - .type = MT_DEVICE + .type = MT_IXP2000_DEVICE, }, { .virtual = IXP2000_INTCTL_VIRT_BASE, - .physical = IXP2000_INTCTL_PHYS_BASE, + .pfn = __phys_to_pfn(IXP2000_INTCTL_PHYS_BASE), .length = IXP2000_INTCTL_SIZE, - .type = MT_DEVICE + .type = MT_IXP2000_DEVICE, }, { .virtual = IXP2000_PCI_CREG_VIRT_BASE, - .physical = IXP2000_PCI_CREG_PHYS_BASE, + .pfn = __phys_to_pfn(IXP2000_PCI_CREG_PHYS_BASE), .length = IXP2000_PCI_CREG_SIZE, - .type = MT_DEVICE + .type = MT_IXP2000_DEVICE, }, { .virtual = IXP2000_PCI_CSR_VIRT_BASE, - .physical = IXP2000_PCI_CSR_PHYS_BASE, + .pfn = __phys_to_pfn(IXP2000_PCI_CSR_PHYS_BASE), .length = IXP2000_PCI_CSR_SIZE, - .type = MT_DEVICE + .type = MT_IXP2000_DEVICE, + }, { + .virtual = IXP2000_MSF_VIRT_BASE, + .pfn = __phys_to_pfn(IXP2000_MSF_PHYS_BASE), + .length = IXP2000_MSF_SIZE, + .type = MT_IXP2000_DEVICE, }, { .virtual = IXP2000_PCI_IO_VIRT_BASE, - .physical = IXP2000_PCI_IO_PHYS_BASE, + .pfn = __phys_to_pfn(IXP2000_PCI_IO_PHYS_BASE), .length = IXP2000_PCI_IO_SIZE, - .type = MT_DEVICE + .type = MT_IXP2000_DEVICE, }, { .virtual = IXP2000_PCI_CFG0_VIRT_BASE, - .physical = IXP2000_PCI_CFG0_PHYS_BASE, + .pfn = __phys_to_pfn(IXP2000_PCI_CFG0_PHYS_BASE), .length = IXP2000_PCI_CFG0_SIZE, - .type = MT_DEVICE + .type = MT_IXP2000_DEVICE, }, { .virtual = IXP2000_PCI_CFG1_VIRT_BASE, - .physical = IXP2000_PCI_CFG1_PHYS_BASE, + .pfn = __phys_to_pfn(IXP2000_PCI_CFG1_PHYS_BASE), .length = IXP2000_PCI_CFG1_SIZE, - .type = MT_DEVICE + .type = MT_IXP2000_DEVICE, } }; -static struct uart_port ixp2000_serial_port = { - .membase = (char *)(IXP2000_UART_VIRT_BASE + 3), - .mapbase = IXP2000_UART_PHYS_BASE + 3, - .irq = IRQ_IXP2000_UART, - .flags = UPF_SKIP_TEST, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = 50000000, - .line = 0, - .type = PORT_XSCALE, - .fifosize = 16 -}; - void __init ixp2000_map_io(void) { - extern unsigned int processor_id; - /* - * On IXP2400 CPUs we need to use MT_IXP2000_DEVICE for - * tweaking the PMDs so XCB=101. On IXP2800s we use the normal - * PMD flags. + * On IXP2400 CPUs we need to use MT_IXP2000_DEVICE so that + * XCB=101 (to avoid triggering erratum #66), and given that + * this mode speeds up I/O accesses and we have write buffer + * flushes in the right places anyway, it doesn't hurt to use + * XCB=101 for all IXP2000s. */ - if ((processor_id & 0xfffffff0) == 0x69054190) { - int i; + iotable_init(ixp2000_io_desc, ARRAY_SIZE(ixp2000_io_desc)); - printk(KERN_INFO "Enabling IXP2400 erratum #66 workaround\n"); + /* Set slowport to 8-bit mode. */ + ixp2000_reg_wrb(IXP2000_SLOWPORT_FRM, 1); +} - for(i=0;i<ARRAY_SIZE(ixp2000_io_desc);i++) - ixp2000_io_desc[i].type = MT_IXP2000_DEVICE; - } - iotable_init(ixp2000_io_desc, ARRAY_SIZE(ixp2000_io_desc)); - early_serial_setup(&ixp2000_serial_port); +/************************************************************************* + * Serial port support for IXP2000 + *************************************************************************/ +static struct plat_serial8250_port ixp2000_serial_port[] = { + { + .mapbase = IXP2000_UART_PHYS_BASE, + .membase = (char *)(IXP2000_UART_VIRT_BASE + 3), + .irq = IRQ_IXP2000_UART, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = 50000000, + }, + { }, +}; - /* Set slowport to 8-bit mode. */ - ixp2000_reg_write(IXP2000_SLOWPORT_FRM, 1); +static struct resource ixp2000_uart_resource = { + .start = IXP2000_UART_PHYS_BASE, + .end = IXP2000_UART_PHYS_BASE + 0x1f, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device ixp2000_serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = ixp2000_serial_port, + }, + .num_resources = 1, + .resource = &ixp2000_uart_resource, +}; + +void __init ixp2000_uart_init(void) +{ + platform_device_register(&ixp2000_serial_device); } + /************************************************************************* * Timer-tick functions for IXP2000 *************************************************************************/ static unsigned ticks_per_jiffy; static unsigned ticks_per_usec; static unsigned next_jiffy_time; +static volatile unsigned long *missing_jiffy_timer_csr; unsigned long ixp2000_gettimeoffset (void) { unsigned long offset; - offset = next_jiffy_time - *IXP2000_T4_CSR; + offset = next_jiffy_time - *missing_jiffy_timer_csr; return offset / ticks_per_usec; } @@ -177,9 +199,9 @@ write_seqlock(&xtime_lock); /* clear timer 1 */ - ixp2000_reg_write(IXP2000_T1_CLR, 1); - - while ((next_jiffy_time - *IXP2000_T4_CSR) > ticks_per_jiffy) { + ixp2000_reg_wrb(IXP2000_T1_CLR, 1); + + while ((next_jiffy_time - *missing_jiffy_timer_csr) > ticks_per_jiffy) { timer_tick(regs); next_jiffy_time -= ticks_per_jiffy; } @@ -191,26 +213,43 @@ static struct irqaction ixp2000_timer_irq = { .name = "IXP2000 Timer Tick", - .flags = SA_INTERRUPT, - .handler = ixp2000_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = ixp2000_timer_interrupt, }; void __init ixp2000_init_time(unsigned long tick_rate) { - ixp2000_reg_write(IXP2000_T1_CLR, 0); - ixp2000_reg_write(IXP2000_T4_CLR, 0); - ticks_per_jiffy = (tick_rate + HZ/2) / HZ; ticks_per_usec = tick_rate / 1000000; + /* + * We use timer 1 as our timer interrupt. + */ + ixp2000_reg_write(IXP2000_T1_CLR, 0); ixp2000_reg_write(IXP2000_T1_CLD, ticks_per_jiffy - 1); ixp2000_reg_write(IXP2000_T1_CTL, (1 << 7)); /* - * We use T4 as a monotonic counter to track missed jiffies + * We use a second timer as a monotonic counter for tracking + * missed jiffies. The IXP2000 has four timers, but if we're + * on an A-step IXP2800, timer 2 and 3 don't work, so on those + * chips we use timer 4. Timer 4 is the only timer that can + * be used for the watchdog, so we use timer 2 if we're on a + * non-buggy chip. */ - ixp2000_reg_write(IXP2000_T4_CLD, -1); - ixp2000_reg_write(IXP2000_T4_CTL, (1 << 7)); + if ((*IXP2000_PRODUCT_ID & 0x001ffef0) == 0x00000000) { + printk(KERN_INFO "Enabling IXP2800 erratum #25 workaround\n"); + + ixp2000_reg_write(IXP2000_T4_CLR, 0); + ixp2000_reg_write(IXP2000_T4_CLD, -1); + ixp2000_reg_wrb(IXP2000_T4_CTL, (1 << 7)); + missing_jiffy_timer_csr = IXP2000_T4_CSR; + } else { + ixp2000_reg_write(IXP2000_T2_CLR, 0); + ixp2000_reg_write(IXP2000_T2_CLD, -1); + ixp2000_reg_wrb(IXP2000_T2_CTL, (1 << 7)); + missing_jiffy_timer_csr = IXP2000_T2_CSR; + } next_jiffy_time = 0xffffffff; /* register for interrupt */ @@ -220,35 +259,40 @@ /************************************************************************* * GPIO helpers *************************************************************************/ -static unsigned long GPIO_IRQ_rising_edge; static unsigned long GPIO_IRQ_falling_edge; +static unsigned long GPIO_IRQ_rising_edge; static unsigned long GPIO_IRQ_level_low; static unsigned long GPIO_IRQ_level_high; -void gpio_line_config(int line, int style) +static void update_gpio_int_csrs(void) +{ + ixp2000_reg_write(IXP2000_GPIO_FEDR, GPIO_IRQ_falling_edge); + ixp2000_reg_write(IXP2000_GPIO_REDR, GPIO_IRQ_rising_edge); + ixp2000_reg_write(IXP2000_GPIO_LSLR, GPIO_IRQ_level_low); + ixp2000_reg_wrb(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high); +} + +void gpio_line_config(int line, int direction) { unsigned long flags; local_irq_save(flags); + if (direction == GPIO_OUT) { + irq_desc[line + IRQ_IXP2000_GPIO0].valid = 0; - if(style == GPIO_OUT) { /* if it's an output, it ain't an interrupt anymore */ - ixp2000_reg_write(IXP2000_GPIO_PDSR, (1 << line)); GPIO_IRQ_falling_edge &= ~(1 << line); GPIO_IRQ_rising_edge &= ~(1 << line); GPIO_IRQ_level_low &= ~(1 << line); GPIO_IRQ_level_high &= ~(1 << line); - ixp2000_reg_write(IXP2000_GPIO_FEDR, GPIO_IRQ_falling_edge); - ixp2000_reg_write(IXP2000_GPIO_REDR, GPIO_IRQ_rising_edge); - ixp2000_reg_write(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high); - ixp2000_reg_write(IXP2000_GPIO_LSLR, GPIO_IRQ_level_low); - irq_desc[line+IRQ_IXP2000_GPIO0].valid = 0; - } else if(style == GPIO_IN) { - ixp2000_reg_write(IXP2000_GPIO_PDCR, (1 << line)); + update_gpio_int_csrs(); + + ixp2000_reg_wrb(IXP2000_GPIO_PDSR, 1 << line); + } else if (direction == GPIO_IN) { + ixp2000_reg_wrb(IXP2000_GPIO_PDCR, 1 << line); } - local_irq_restore(flags); -} +} /************************************************************************* @@ -262,20 +306,61 @@ for (i = 0; i <= 7; i++) { if (status & (1<<i)) { desc = irq_desc + i + IRQ_IXP2000_GPIO0; - desc->handle(i + IRQ_IXP2000_GPIO0, desc, regs); + desc_handle_irq(i + IRQ_IXP2000_GPIO0, desc, regs); } } } +static int ixp2000_GPIO_irq_type(unsigned int irq, unsigned int type) +{ + int line = irq - IRQ_IXP2000_GPIO0; + + /* + * First, configure this GPIO line as an input. + */ + ixp2000_reg_write(IXP2000_GPIO_PDCR, 1 << line); + + /* + * Then, set the proper trigger type. + */ + if (type & IRQT_FALLING) + GPIO_IRQ_falling_edge |= 1 << line; + else + GPIO_IRQ_falling_edge &= ~(1 << line); + if (type & IRQT_RISING) + GPIO_IRQ_rising_edge |= 1 << line; + else + GPIO_IRQ_rising_edge &= ~(1 << line); + if (type & IRQT_LOW) + GPIO_IRQ_level_low |= 1 << line; + else + GPIO_IRQ_level_low &= ~(1 << line); + if (type & IRQT_HIGH) + GPIO_IRQ_level_high |= 1 << line; + else + GPIO_IRQ_level_high &= ~(1 << line); + update_gpio_int_csrs(); + + /* + * Finally, mark the corresponding IRQ as valid. + */ + irq_desc[irq].valid = 1; + + return 0; +} + static void ixp2000_GPIO_irq_mask_ack(unsigned int irq) { ixp2000_reg_write(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0))); - ixp2000_reg_write(IXP2000_GPIO_INST, (1 << (irq - IRQ_IXP2000_GPIO0))); + + ixp2000_reg_write(IXP2000_GPIO_EDSR, (1 << (irq - IRQ_IXP2000_GPIO0))); + ixp2000_reg_write(IXP2000_GPIO_LDSR, (1 << (irq - IRQ_IXP2000_GPIO0))); + ixp2000_reg_wrb(IXP2000_GPIO_INST, (1 << (irq - IRQ_IXP2000_GPIO0))); } static void ixp2000_GPIO_irq_mask(unsigned int irq) { - ixp2000_reg_write(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0))); + ixp2000_reg_wrb(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0))); } static void ixp2000_GPIO_irq_unmask(unsigned int irq) @@ -284,18 +369,19 @@ } static struct irqchip ixp2000_GPIO_irq_chip = { - .ack = ixp2000_GPIO_irq_mask_ack, - .mask = ixp2000_GPIO_irq_mask, - .unmask = ixp2000_GPIO_irq_unmask + .ack = ixp2000_GPIO_irq_mask_ack, + .mask = ixp2000_GPIO_irq_mask, + .unmask = ixp2000_GPIO_irq_unmask, + .set_type = ixp2000_GPIO_irq_type, }; static void ixp2000_pci_irq_mask(unsigned int irq) { unsigned long temp = *IXP2000_PCI_XSCALE_INT_ENABLE; if (irq == IRQ_IXP2000_PCIA) - ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 26))); + ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 26))); else if (irq == IRQ_IXP2000_PCIB) - ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 27))); + ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 27))); } static void ixp2000_pci_irq_unmask(unsigned int irq) @@ -307,6 +393,40 @@ ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp | (1 << 27))); } +/* + * Error interrupts. These are used extensively by the microengine drivers + */ +static void ixp2000_err_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) +{ + int i; + unsigned long status = *IXP2000_IRQ_ERR_STATUS; + + for(i = 31; i >= 0; i--) { + if(status & (1 << i)) { + desc = irq_desc + IRQ_IXP2000_DRAM0_MIN_ERR + i; + desc->handle(IRQ_IXP2000_DRAM0_MIN_ERR + i, desc, regs); + } + } +} + +static void ixp2000_err_irq_mask(unsigned int irq) +{ + ixp2000_reg_write(IXP2000_IRQ_ERR_ENABLE_CLR, + (1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR))); +} + +static void ixp2000_err_irq_unmask(unsigned int irq) +{ + ixp2000_reg_write(IXP2000_IRQ_ERR_ENABLE_SET, + (1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR))); +} + +static struct irqchip ixp2000_err_irq_chip = { + .ack = ixp2000_err_irq_mask, + .mask = ixp2000_err_irq_mask, + .unmask = ixp2000_err_irq_unmask +}; + static struct irqchip ixp2000_pci_irq_chip = { .ack = ixp2000_pci_irq_mask, .mask = ixp2000_pci_irq_mask, @@ -315,12 +435,12 @@ static void ixp2000_irq_mask(unsigned int irq) { - ixp2000_reg_write(IXP2000_IRQ_ENABLE_CLR, (1 << irq)); + ixp2000_reg_wrb(IXP2000_IRQ_ENABLE_CLR, (1 << irq)); } static void ixp2000_irq_unmask(unsigned int irq) { - ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << irq)); + ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << irq)); } static struct irqchip ixp2000_irq_chip = { @@ -347,7 +467,7 @@ ixp2000_reg_write(IXP2000_GPIO_INCR, -1); /* clear PCI interrupt sources */ - ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, 0); + ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, 0); /* * Certain bits in the IRQ status register of the @@ -357,16 +477,28 @@ * our mask/unmask code much simpler. */ for (irq = IRQ_IXP2000_SOFT_INT; irq <= IRQ_IXP2000_THDB3; irq++) { - if((1 << irq) & IXP2000_VALID_IRQ_MASK) { + if ((1 << irq) & IXP2000_VALID_IRQ_MASK) { set_irq_chip(irq, &ixp2000_irq_chip); set_irq_handler(irq, do_level_IRQ); set_irq_flags(irq, IRQF_VALID); } else set_irq_flags(irq, 0); } - + + for (irq = IRQ_IXP2000_DRAM0_MIN_ERR; irq <= IRQ_IXP2000_SP_INT; irq++) { + if((1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR)) & + IXP2000_VALID_ERR_IRQ_MASK) { + set_irq_chip(irq, &ixp2000_err_irq_chip); + set_irq_handler(irq, do_level_IRQ); + set_irq_flags(irq, IRQF_VALID); + } + else + set_irq_flags(irq, 0); + } + set_irq_chained_handler(IRQ_IXP2000_ERRSUM, ixp2000_err_irq_handler); + /* * GPIO IRQs are invalid until someone sets the interrupt mode - * by calling gpio_line_set(); + * by calling set_irq_type(). */ for (irq = IRQ_IXP2000_GPIO0; irq <= IRQ_IXP2000_GPIO7; irq++) { set_irq_chip(irq, &ixp2000_GPIO_irq_chip); Index: ixdp2400.c =================================================================== RCS file: /cvsroot/netnice/Linux/arch/arm/mach-ixp2000/ixdp2400.c,v retrieving revision 1.1.1.1 retrieving revision 1.1.1.1.6.1 diff -u -d -r1.1.1.1 -r1.1.1.1.6.1 --- ixdp2400.c 5 Nov 2005 19:53:04 -0000 1.1.1.1 +++ ixdp2400.c 16 Feb 2006 10:13:15 -0000 1.1.1.1.6.1 @@ -168,12 +168,14 @@ } MACHINE_START(IXDP2400, "Intel IXDP2400 Development Platform") - MAINTAINER("MontaVista Software, Inc.") - BOOT_MEM(0x00000000, IXP2000_UART_PHYS_BASE, IXP2000_UART_VIRT_BASE) - BOOT_PARAMS(0x00000100) - MAPIO(ixdp2x00_map_io) - INITIRQ(ixdp2400_init_irq) + /* Maintainer: MontaVista Software, Inc. */ + .phys_ram = 0x00000000, + .phys_io = IXP2000_UART_PHYS_BASE, + .io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = ixdp2x00_map_io, + .init_irq = ixdp2400_init_irq, .timer = &ixdp2400_timer, - INIT_MACHINE(ixdp2x00_init_machine) + .init_machine = ixdp2x00_init_machine, MACHINE_END Index: ixdp2x00.c =================================================================== RCS file: /cvsroot/netnice/Linux/arch/arm/mach-ixp2000/ixdp2x00.c,v retrieving revision 1.1.1.1 retrieving revision 1.1.1.1.6.1 diff -u -d -r1.1.1.1 -r1.1.1.1.6.1 --- ixdp2x00.c 5 Nov 2005 19:53:05 -0000 1.1.1.1 +++ ixdp2x00.c 16 Feb 2006 10:13:15 -0000 1.1.1.1.6.1 @@ -20,7 +20,7 @@ #include <linux/mm.h> #include <linux/sched.h> #include <linux/interrupt.h> -#include <linux/device.h> +#include <linux/platform_device.h> #include <linux/bitops.h> #include <linux/pci.h> #include <linux/ioport.h> @@ -42,6 +42,9 @@ #include <asm/mach/flash.h> #include <asm/mach/arch.h> +#include <asm/arch/gpio.h> + + /************************************************************************* * IXDP2x00 IRQ Initialization *************************************************************************/ @@ -78,7 +81,7 @@ dummy = *board_irq_mask; dummy |= IXP2000_BOARD_IRQ_MASK(irq); - ixp2000_reg_write(board_irq_mask, dummy); + ixp2000_reg_wrb(board_irq_mask, dummy); #ifdef CONFIG_ARCH_IXDP2400 if (machine_is_ixdp2400()) @@ -98,7 +101,7 @@ dummy = *board_irq_mask; dummy &= ~IXP2000_BOARD_IRQ_MASK(irq); - ixp2000_reg_write(board_irq_mask, dummy); + ixp2000_reg_wrb(board_irq_mask, dummy); if (machine_is_ixdp2400()) ixp2000_release_slowport(&old_cfg); @@ -130,7 +133,7 @@ struct irqdesc *cpld_desc; int cpld_irq = IXP2000_BOARD_IRQ(0) + i; cpld_desc = irq_desc + cpld_irq; - cpld_desc->handle(cpld_irq, cpld_desc, regs); + desc_handle_irq(cpld_irq, cpld_desc, regs); } } @@ -173,7 +176,7 @@ *************************************************************************/ static struct map_desc ixdp2x00_io_desc __initdata = { .virtual = IXDP2X00_VIRT_CPLD_BASE, - .physical = IXDP2X00_PHYS_CPLD_BASE, + .pfn = __phys_to_pfn(IXDP2X00_PHYS_CPLD_BASE), .length = IXDP2X00_CPLD_SIZE, .type = MT_DEVICE }; @@ -300,5 +303,6 @@ gpio_line_config(IXDP2X00_GPIO_I2C_ENABLE, GPIO_OUT); platform_add_devices(ixdp2x00_devices, ARRAY_SIZE(ixdp2x00_devices)); + ixp2000_uart_init(); } Index: Makefile =================================================================== RCS file: /cvsroot/netnice/Linux/arch/arm/mach-ixp2000/Makefile,v retrieving revision 1.1.1.1 retrieving revision 1.1.1.1.6.1 diff -u -d -r1.1.1.1 -r1.1.1.1.6.1 --- Makefile 5 Nov 2005 19:53:04 -0000 1.1.1.1 +++ Makefile 16 Feb 2006 10:13:15 -0000 1.1.1.1.6.1 @@ -1,7 +1,7 @@ # # Makefile for the linux kernel. # -obj-y := core.o pci.o +obj-y := core.o pci.o uengine.o obj-m := obj-n := obj- := Index: ixdp2x01.c =================================================================== RCS file: /cvsroot/netnice/Linux/arch/arm/mach-ixp2000/ixdp2x01.c,v retrieving revision 1.1.1.1 retrieving revision 1.1.1.1.6.1 diff -u -d -r1.1.1.1 -r1.1.1.1.6.1 --- ixdp2x01.c 5 Nov 2005 19:53:05 -0000 1.1.1.1 +++ ixdp2x01.c 16 Feb 2006 10:13:15 -0000 1.1.1.1.6.1 @@ -29,7 +29,7 @@ #include <linux/serial.h> #include <linux/tty.h> #include <linux/serial_core.h> -#include <linux/device.h> +#include <linux/platform_device.h> #include <asm/io.h> #include <asm/irq.h> @@ -51,7 +51,7 @@ *************************************************************************/ static void ixdp2x01_irq_mask(unsigned int irq) { - ixp2000_reg_write(IXDP2X01_INT_MASK_SET_REG, + ixp2000_reg_wrb(IXDP2X01_INT_MASK_SET_REG, IXP2000_BOARD_IRQ_MASK(irq)); } @@ -82,7 +82,7 @@ struct irqdesc *cpld_desc; int cpld_irq = IXP2000_BOARD_IRQ(0) + i; cpld_desc = irq_desc + cpld_irq; - cpld_desc->handle(cpld_irq, cpld_desc, regs); + desc_handle_irq(cpld_irq, cpld_desc, regs); } } @@ -114,7 +114,7 @@ /* Mask all interrupts from CPLD, disable simulation */ ixp2000_reg_write(IXDP2X01_INT_MASK_SET_REG, 0xffffffff); - ixp2000_reg_write(IXDP2X01_INT_SIM_REG, 0); + ixp2000_reg_wrb(IXDP2X01_INT_SIM_REG, 0); for (irq = NR_IXP2000_IRQS; irq < NR_IXDP2X01_IRQS; irq++) { if (irq & valid_irq_mask) { @@ -136,7 +136,7 @@ *************************************************************************/ static struct map_desc ixdp2x01_io_desc __initdata = { .virtual = IXDP2X01_VIRT_CPLD_BASE, - .physical = IXDP2X01_PHYS_CPLD_BASE, + .pfn = __phys_to_pfn(IXDP2X01_PHYS_CPLD_BASE), .length = IXDP2X01_CPLD_REGION_SIZE, .type = MT_DEVICE }; @@ -299,7 +299,6 @@ int __init ixdp2x01_pci_init(void) { - pci_common_init(&ixdp2x01_pci); return 0; } @@ -316,7 +315,7 @@ static unsigned long ixdp2x01_flash_bank_setup(unsigned long ofs) { - ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG, + ixp2000_reg_wrb(IXDP2X01_CPLD_FLASH_REG, ((ofs >> IXDP2X01_FLASH_WINDOW_BITS) | IXDP2X01_CPLD_FLASH_INTERN)); return (ofs & IXDP2X01_FLASH_WINDOW_MASK); } @@ -363,37 +362,42 @@ static void __init ixdp2x01_init_machine(void) { - ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG, + ixp2000_reg_wrb(IXDP2X01_CPLD_FLASH_REG, (IXDP2X01_CPLD_FLASH_BANK_MASK | IXDP2X01_CPLD_FLASH_INTERN)); ixdp2x01_flash_data.nr_banks = ((*IXDP2X01_CPLD_FLASH_REG & IXDP2X01_CPLD_FLASH_BANK_MASK) + 1); platform_add_devices(ixdp2x01_devices, ARRAY_SIZE(ixdp2x01_devices)); + ixp2000_uart_init(); } #ifdef CONFIG_ARCH_IXDP2401 MACHINE_START(IXDP2401, "Intel IXDP2401 Development Platform") - MAINTAINER("MontaVista Software, Inc.") - BOOT_MEM(0x00000000, IXP2000_UART_PHYS_BASE, IXP2000_UART_VIRT_BASE) - BOOT_PARAMS(0x00000100) - MAPIO(ixdp2x01_map_io) - INITIRQ(ixdp2x01_init_irq) + /* Maintainer: MontaVista Software, Inc. */ + .phys_ram = 0x00000000, + .phys_io = IXP2000_UART_PHYS_BASE, + .io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = ixdp2x01_map_io, + .init_irq = ixdp2x01_init_irq, .timer = &ixdp2x01_timer, - INIT_MACHINE(ixdp2x01_init_machine) + .init_machine = ixdp2x01_init_machine, MACHINE_END #endif #ifdef CONFIG_ARCH_IXDP2801 MACHINE_START(IXDP2801, "Intel IXDP2801 Development Platform") - MAINTAINER("MontaVista Software, Inc.") - BOOT_MEM(0x00000000, IXP2000_UART_PHYS_BASE, IXP2000_UART_VIRT_BASE) - BOOT_PARAMS(0x00000100) - MAPIO(ixdp2x01_map_io) - INITIRQ(ixdp2x01_init_irq) + /* Maintainer: MontaVista Software, Inc. */ + .phys_ram = 0x00000000, + .phys_io = IXP2000_UART_PHYS_BASE, + .io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = ixdp2x01_map_io, + .init_irq = ixdp2x01_init_irq, .timer = &ixdp2x01_timer, - INIT_MACHINE(ixdp2x01_init_machine) + .init_machine = ixdp2x01_init_machine, MACHINE_END #endif Index: enp2611.c =================================================================== RCS file: /cvsroot/netnice/Linux/arch/arm/mach-ixp2000/enp2611.c,v retrieving revision 1.1.1.1 retrieving revision 1.1.1.1.6.1 diff -u -d -r1.1.1.1 -r1.1.1.1.6.1 --- enp2611.c 5 Nov 2005 19:53:04 -0000 1.1.1.1 +++ enp2611.c 16 Feb 2006 10:13:15 -0000 1.1.1.1.6.1 @@ -32,7 +32,7 @@ #include <linux/serial.h> #include <linux/tty.h> #include <linux/serial_core.h> -#include <linux/device.h> +#include <linux/platform_device.h> #include <asm/io.h> #include <asm/irq.h> @@ -64,6 +64,35 @@ /************************************************************************* + * ENP-2611 I/O + *************************************************************************/ +static struct map_desc enp2611_io_desc[] __initdata = { + { + .virtual = ENP2611_CALEB_VIRT_BASE, + .pfn = __phys_to_pfn(ENP2611_CALEB_PHYS_BASE), + .length = ENP2611_CALEB_SIZE, + .type = MT_IXP2000_DEVICE, + }, { + .virtual = ENP2611_PM3386_0_VIRT_BASE, + .pfn = __phys_to_pfn(ENP2611_PM3386_0_PHYS_BASE), + .length = ENP2611_PM3386_0_SIZE, + .type = MT_IXP2000_DEVICE, + }, { + .virtual = ENP2611_PM3386_1_VIRT_BASE, + .pfn = __phys_to_pfn(ENP2611_PM3386_1_PHYS_BASE), + .length = ENP2611_PM3386_1_SIZE, + .type = MT_IXP2000_DEVICE, + } +}; + +void __init enp2611_map_io(void) +{ + ixp2000_map_io(); + iotable_init(enp2611_io_desc, ARRAY_SIZE(enp2611_io_desc)); +} + + +/************************************************************************* * ENP-2611 PCI *************************************************************************/ static int enp2611_pci_setup(int nr, struct pci_sys_data *sys) @@ -197,24 +226,42 @@ .resource = &enp2611_flash_resource, }; +static struct ixp2000_i2c_pins enp2611_i2c_gpio_pins = { + .sda_pin = ENP2611_GPIO_SDA, + .scl_pin = ENP2611_GPIO_SCL, +}; + +static struct platform_device enp2611_i2c_controller = { + .name = "IXP2000-I2C", + .id = 0, + .dev = { + .platform_data = &enp2611_i2c_gpio_pins + }, + .num_resources = 0 +}; + static struct platform_device *enp2611_devices[] __initdata = { - &enp2611_flash + &enp2611_flash, + &enp2611_i2c_controller }; static void __init enp2611_init_machine(void) { platform_add_devices(enp2611_devices, ARRAY_SIZE(enp2611_devices)); + ixp2000_uart_init(); } MACHINE_START(ENP2611, "Radisys ENP-2611 PCI network processor board") - MAINTAINER("Lennert Buytenhek <bu...@wa...>") - BOOT_MEM(0x00000000, IXP2000_UART_PHYS_BASE, IXP2000_UART_VIRT_BASE) - BOOT_PARAMS(0x00000100) - MAPIO(ixp2000_map_io) - INITIRQ(ixp2000_init_irq) + /* Maintainer: Lennert Buytenhek <bu...@wa...> */ + .phys_ram = 0x00000000, + .phys_io = IXP2000_UART_PHYS_BASE, + .io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = enp2611_map_io, + .init_irq = ixp2000_init_irq, .timer = &enp2611_timer, - INIT_MACHINE(enp2611_init_machine) + .init_machine = enp2611_init_machine, MACHINE_END Index: Kconfig =================================================================== RCS file: /cvsroot/netnice/Linux/arch/arm/mach-ixp2000/Kconfig,v retrieving revision 1.1.1.1 retrieving revision 1.1.1.1.6.1 diff -u -d -r1.1.1.1 -r1.1.1.1.6.1 --- Kconfig 5 Nov 2005 19:53:04 -0000 1.1.1.1 +++ Kconfig 16 Feb 2006 10:13:15 -0000 1.1.1.1.6.1 @@ -54,6 +54,14 @@ depends on ARCH_IXDP2401 || ARCH_IXDP2801 default y +config IXP2000_SUPPORT_BROKEN_PCI_IO + bool "Support broken PCI I/O on older IXP2000s" + default y + help + Say 'N' here if you only intend to run your kernel on an + IXP2000 B0 or later model and do not need the PCI I/O + byteswap workaround. Say 'Y' otherwise. + endmenu endif Index: pci.c =================================================================== RCS file: /cvsroot/netnice/Linux/arch/arm/mach-ixp2000/pci.c,v retrieving revision 1.1.1.1 retrieving revision 1.1.1.1.6.1 diff -u -d -r1.1.1.1 -r1.1.1.1.6.1 --- pci.c 5 Nov 2005 19:53:05 -0000 1.1.1.1 +++ pci.c 16 Feb 2006 10:13:15 -0000 1.1.1.1.6.1 @@ -28,7 +28,6 @@ #include <asm/io.h> #include <asm/irq.h> #include <asm/system.h> -#include <asm/mach-types.h> #include <asm/hardware.h> #include <asm/mach/pci.h> @@ -149,7 +148,7 @@ local_irq_save(flags); temp = *(IXP2000_PCI_CONTROL); if (temp & ((1 << 8) | (1 << 5))) { - ixp2000_reg_write(IXP2000_PCI_CONTROL, temp); + ixp2000_reg_wrb(IXP2000_PCI_CONTROL, temp); } temp = *(IXP2000_PCI_CMDSTAT); @@ -179,8 +178,8 @@ local_irq_save(flags); temp = *(IXP2000_PCI_CONTROL); - if (temp & ((1 << 8) | (1 << 5))) { - ixp2000_reg_write(IXP2000_PCI_CONTROL, temp); + if (temp & ((1 << 8) | (1 << 5))) { + ixp2000_reg_wrb(IXP2000_PCI_CONTROL, temp); } temp = *(IXP2000_PCI_CMDSTAT); @@ -198,6 +197,19 @@ void __init ixp2000_pci_preinit(void) { +#ifndef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO + /* + * Configure the PCI unit to properly byteswap I/O transactions, + * and verify that it worked. + */ + ixp2000_reg_write(IXP2000_PCI_CONTROL, + (*IXP2000_PCI_CONTROL | PCI_CONTROL_IEE)); + + if ((*IXP2000_PCI_CONTROL & PCI_CONTROL_IEE) == 0) + panic("IXP2000: PCI I/O is broken on this ixp model, and " + "the needed workaround has not been configured in"); +#endif + hook_fault_code(16+6, ixp2000_pci_abort_handler, SIGBUS, "PCI config cycle to non-existent device"); } Index: ixdp2800.c =================================================================== RCS file: /cvsroot/netnice/Linux/arch/arm/mach-ixp2000/ixdp2800.c,v retrieving revision 1.1.1.1 retrieving revision 1.1.1.1.6.1 diff -u -d -r1.1.1.1 -r1.1.1.1.6.1 --- ixdp2800.c 5 Nov 2005 19:53:05 -0000 1.1.1.1 +++ ixdp2800.c 16 Feb 2006 10:13:15 -0000 1.1.1.1.6.1 @@ -42,12 +42,6 @@ #include <asm/mach/flash.h> #include <asm/mach/arch.h> - -void ixdp2400_init_irq(void) -{ - ixdp2x00_init_irq(IXDP2800_CPLD_INT_STAT, IXDP2800_CPLD_INT_MASK, IXDP2400_NR_IRQS); -} - /************************************************************************* * IXDP2800 timer tick *************************************************************************/ @@ -290,12 +284,14 @@ } MACHINE_START(IXDP2800, "Intel IXDP2800 Development Platform") - MAINTAINER("MontaVista Software, Inc.") - BOOT_MEM(0x00000000, IXP2000_UART_PHYS_BASE, IXP2000_UART_VIRT_BASE) - BOOT_PARAMS(0x00000100) - MAPIO(ixdp2x00_map_io) - INITIRQ(ixdp2800_init_irq) + /* Maintainer: MontaVista Software, Inc. */ + .phys_ram = 0x00000000, + .phys_io = IXP2000_UART_PHYS_BASE, + .io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = ixdp2x00_map_io, + .init_irq = ixdp2800_init_irq, .timer = &ixdp2800_timer, - INIT_MACHINE(ixdp2x00_init_machine) + .init_machine = ixdp2x00_init_machine, MACHINE_END |