Re: [Netdisco] bp_index mapping problem for Nortel 8600's

[Eric M. <er...@je...>]

I have not heard of this problem before, but it sounds similar to some 
posts on
the list previously related to bulkwalk.  The "Port 64 has no bp_index 
mapping.
Skipping" is being caused by the device not having a port in the database with
the index 64.

Please check the device in question by using the web interface in device view
and showing all ports.  Do you have a port 1.1?  The index 64 with no mapping
reported should be 1.1.

If you do not have a port 1.1, refresh the device and see if it shows 
up.  Also,
if you have bulkwalk enabled turn it off.  Depending on the version of
SNMP::Info you are using you may not be able to turn off bulkwalk 
properly.  If
that is the case, delete the device and force the SNMP version to 1 in the
config file and rediscover.  Once the device is in the database it will cache
the SNMP version to use.  If ports are not showing up properly after either of
these, please send me the output of "netdisco -d router_ip -D".

Thanks,
Eric

Quoting Brian Chow <bc...@ry...>:

> Hi,
>
> I have this problem regarding the 8600's. I cannot seem to be able to 
> see the mac address that is connected to the port on the nortel 8600.
> Majority of them does not show the mac address... and I do a 
> "netdisco -M router_ip -D" I get this error
>
> Any suggestions? or has anyone had this problem?
> Thanks in advance.
>
> SNMP::Info::_global layers : sysServices.0
> SNMP::Info::_global description : sysDescr.0
> SNMP::Info::device_type() layers:00000110 sysDescr: "Passport-8610 
> (3.7.3.0)".
> SNMP::Info::specify() - Changed Class to SNMP::Info::Layer3::Passport.
> SNMP::Info::_global layers : sysServices.0
>   Device Type : SNMP::Info::Layer3::Passport
> SNMP::Info::_load_attr i_index2 : ifIndex
> SNMP::Info::_load_attr rc_vlan_if : rcVlanIfIndex
> SNMP::Info::_load_attr rc_cpu_ifindex : rc2kCpuEthernetPortIfIndex
> SNMP::Info::_global rc_virt_ip : rcSysVirtualIpAddr.0
> SNMP::Info::_load_attr rc_vlan_id : rcVlanId
> SNMP::Info::_global description : sysDescr.0
> SNMP::Info::_load_attr fw_mac : dot1dTpFdbAddress
> SNMP::Info::_load_attr fw_port : dot1dTpFdbPort
> SNMP::Info::_load_attr bp_index : dot1dBasePortIfIndex
>   Port 64 has no bp_index mapping. Skipping
>   Port 64 has no bp_index mapping. Skipping
>   Port 139 has no bp_index mapping. Skipping
>   Port 64 has no bp_index mapping. Skipping
>   Port 150 has no bp_index mapping. Skipping
>   Port 64 has no bp_index mapping. Skipping
>   Port 64 has no bp_index mapping. Skipping
>   Port 134 has no bp_index mapping. Skipping
>   Port 64 has no bp_index mapping. Skipping
>   Port 71 has no bp_index mapping. Skipping
>   Port 166 has no bp_index mapping. Skipping
>
> Brian Chow
>
> Junior Network Engineer
> CCS
> Ryerson University
>