Menu
▾
▴
Re: [Netdisco] netdisco2 adding new MIBs
|
From: Dwayne H. <dho...@ha...> - 2016-01-22 15:27:28
|
Any idea when the new ver will be available? On Tue, Jan 19, 2016 at 11:40 PM, Eric Miller <er...@je...> wrote: > Avaya has introduced a new "Enhanced" SONMP topology table on the VSP > 7200 and 8K to support channelized interfaces, 40G or 100G ports broken > out into multiple 10G ports. > > This required both updated MIBs and updated to SNMP::Info. Both have > currently been committed to the source code repositories but not yet > released. These updates should resolve unrecognized devices, inaccurate > port numbering, and missing topology information for newer VOSS based > devices. > > If you have the ability to test from the git repositories I would > appreciate it. Otherwise it will be available in the next release of > both the mibs and SNMP::Info. > > Thanks, > Eric > > On 2015-11-30 10:42, Martin Lärcher wrote: > > Hi Oliver, > > > > the devices are identified as: > > > > avaya / VSP8284XSQ: SNMP::Info::Layer3::Passport > > avaya / rapidCity.209: SNMP::Info::Layer3::Passport > > > > rapidCity.209 is the Avaya VSP-7254XSQ. > > > > But we get always "validate_autoload_method(hasCDP) Unable to resolve > > method" on these devices at discover process. > > > > On a "avaya / VSP9010" wich is also identified as " > > SNMP::Info::Layer3::Passport" the discover succeeds - also on the > > older Avaya passport devices (ERS8xxx). > > > > Any hints? > > > > Regards > > Martin > > > > -----Ursprüngliche Nachricht----- > > Von: Oliver Gorwits [mailto:ol...@cp...] > > Gesendet: Samstag, 28. November 2015 20:19 > > An: net...@li... > > Betreff: Re: [Netdisco] netdisco2 adding new MIBs > > > > Hi Martin, > > > > On 2015-11-26 16:49, Martin Lärcher wrote: > >> the same here with Avaya VSP 8000 and VSP 7200. > >> > >> But this devices should support SONMP too, or? > >> > >> We get always "validate_autoload_method(hasCDP) Unable to resolve > >> method" > > > > Well, according to the current release of SNMP::Info, SONMP is > > included in the support neighbor protocols, and is checked for: > > > > https://metacpan.org/pod/SNMP::Info#Topology-Information > > > > However this relies on the device being identified correctly in the > > first place (as something which supports SONMP) - what we call the > > Device Class. You can see the Device Class in the web interface under > > the device details tab, or at the command line when run in debug, when > > the SNMP connection is made. If it's not specific to the > > vendor/platform, then it's likely SONMP is not being tested. > > > > The creation of a new device class is also a little tricky, if > > required. > > > > regards, > > oliver. > > > > > >> Running with debug shows the following: > >> > >> SNMP::Info::_global lldp_sys_cap : LLDP-MIB::lldpLocSysCapEnabled.0 : > >> .1.0.8802.1.1.2.1.3.6.0 > >> > >> SNMP::Info::_global(lldp_sys_cap) NOSUCHOBJECT at > >> /home/netdisco/perl5/lib/perl5/App/Netdisco/Core/Discover.pm line 676. > >> > >> SNMP::Info::_load_attr lldp_rem_id : LLDP-MIB::lldpRemChassisId : > >> .1.0.8802.1.1.2.1.4.1.1.5 error:snmp_translate_obj:Unknown OID hasCDP > >> > >> SNMP::Info::_validate_autoload_method(hasCDP) Unable to resolve > >> method. > >> > >> SNMP::Info::_global sonmp_run : > >> S5-ETH-MULTISEG-TOPOLOGY-MIB::s5EnMsTopStatus.0 : > >> .1.3.6.1.4.1.45.1.6.13.1.2.0 error:snmp_translate_obj:Unknown OID > >> hasFDP > >> > >> SNMP::Info::_validate_autoload_method(hasFDP) Unable to resolve > >> method. > >> > >> error:snmp_translate_obj:Unknown OID hasEDP > >> > >> SNMP::Info::_validate_autoload_method(hasEDP) Unable to resolve > >> method. > >> > >> error:snmp_translate_obj:Unknown OID hasAMAP > >> > >> SNMP::Info::_validate_autoload_method(hasAMAP) Unable to resolve > >> method. > >> > >> SNMP::Info::_load_attr sonmp_topo_port : > >> S5-ETH-MULTISEG-TOPOLOGY-MIB::s5EnMsTopNmmPort : > >> .1.3.6.1.4.1.45.1.6.13.2.1.1.2 SNMP::Info::_load_attr sonmp_topo_ip : > >> S5-ETH-MULTISEG-TOPOLOGY-MIB::s5EnMsTopNmmIpAddr : > >> .1.3.6.1.4.1.45.1.6.13.2.1.1.3 error:snmp_translate_obj:Unknown OID > >> hasCDP > >> > >> SNMP::Info::_validate_autoload_method(hasCDP) Unable to resolve > >> method. > >> > >> [23437] 2015-11-25 15:55:22 debug [192.168.x.x] neigh - CDP/LLDP not > >> enabled! > >> > >> [23437] 2015-11-25 15:55:22 info discover: finished at Wed Nov 25 > >> 16:55:22 2015 [23437] 2015-11-25 15:55:22 info discover: status > >> done: Ended discover for 192.168.x.x > >> > >> Regards > >> > >> Martin > >> > >> VON: mat...@ar... > >> [mailto:mat...@ar...] > >> GESENDET: Freitag, 20. Februar 2015 10:54 > >> AN: net...@li... > >> BETREFF: Re: [Netdisco] netdisco2 adding new MIBs > >> > >> Hello Oliver, > >> > >> thanks for your answer. > >> > >>> If you're not seeing any icon, then probably the neighbor protocols > >>> aren't working correctly on that uplink (CDP, LLDP, etc). You can > >>> discover the devices manually using the web form at the homepage of > >> your > >>> Netdisco installation, or at the command line using netdisco-do. > >> > >> Yes, you're right. The vsp4000 do not know anything about LLDP > >> (*damn*). It is on the Avaya roadmap for further enhancement. Until > >> then we'll have to add devices manually :-( > >> > >>> OK, I will come back to this... at the moment there isn't an easy > >> way, > >>> but I will try to think of something. > >> > >> Thanks for thinking about an easy way to add new mibs. > >> Maybe it's possible to create a website where mibs can be uploaded and > >> processed so that the result can be shared with others that are using > >> these mibs. But maybe I'm not thinking very well and it's more > >> complicated than I can imagine :-) > >> > >> Greetings Mathias > >> > >> ArcelorMittal Bremen GmbH > >> > >> Vorsitzender des Aufsichtsrates: Hedwig Vergote > >> > >> Vorstand der GmbH: Dr. Dietmar Ringel, Vorsitzender, Rudolf Egbert, > >> Jörn Pufpaff, Dr. Paul Benteler > >> > >> Sitz der Gesellschaft: Bremen > >> > >> Amtsgericht Bremen, HRB 15474 HB > > > > > > > ------------------------------------------------------------------------------ > > _______________________________________________ > > Netdisco mailing list > > net...@li... > > https://lists.sourceforge.net/lists/listinfo/netdisco-users > > > > > > > ------------------------------------------------------------------------------ > > Go from Idea to Many App Stores Faster with Intel(R) XDK > > Give your users amazing mobile app experiences with Intel(R) XDK. > > Use one codebase in this all-in-one HTML5 development environment. > > Design, debug & build mobile apps & 2D/3D high-impact games for > > multiple OSs. > > http://pubads.g.doubleclick.net/gampad/clk?id=254741911&iu=/4140 > > _______________________________________________ > > Netdisco mailing list > > net...@li... > > https://lists.sourceforge.net/lists/listinfo/netdisco-users > > > > ------------------------------------------------------------------------------ > Site24x7 APM Insight: Get Deep Visibility into Application Performance > APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month > Monitor end-to-end web transactions and take corrective actions now > Troubleshoot faster and improve end-user experience. Signup Now! > http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140 > _______________________________________________ > Netdisco mailing list > net...@li... > https://lists.sourceforge.net/lists/listinfo/netdisco-users > -- Dwayne Hottinger Supervisor of Network Operations Harrisonburg City Public Schools http://staff.harrisonburg.k12.va.us/~dhottinger |
