Re: [Netdisco] netdisco2 adding new MIBs

[Martin L. <ma...@la...>]

Hi Oliver,

 

the same here with Avaya VSP 8000 and VSP 7200.

But this devices should support SONMP too, or?

 

We get always “validate_autoload_method(hasCDP) Unable to resolve method”

 

Running with debug shows the following:

 

SNMP::Info::_global lldp_sys_cap : LLDP-MIB::lldpLocSysCapEnabled.0 :
.1.0.8802.1.1.2.1.3.6.0

SNMP::Info::_global(lldp_sys_cap) NOSUCHOBJECT at
/home/netdisco/perl5/lib/perl5/App/Netdisco/Core/Discover.pm line 676.

SNMP::Info::_load_attr lldp_rem_id : LLDP-MIB::lldpRemChassisId :
.1.0.8802.1.1.2.1.4.1.1.5 error:snmp_translate_obj:Unknown OID hasCDP

SNMP::Info::_validate_autoload_method(hasCDP) Unable to resolve method.

SNMP::Info::_global sonmp_run :
S5-ETH-MULTISEG-TOPOLOGY-MIB::s5EnMsTopStatus.0 :
.1.3.6.1.4.1.45.1.6.13.1.2.0 error:snmp_translate_obj:Unknown OID hasFDP

SNMP::Info::_validate_autoload_method(hasFDP) Unable to resolve method.

error:snmp_translate_obj:Unknown OID hasEDP

SNMP::Info::_validate_autoload_method(hasEDP) Unable to resolve method.

error:snmp_translate_obj:Unknown OID hasAMAP

SNMP::Info::_validate_autoload_method(hasAMAP) Unable to resolve method.

SNMP::Info::_load_attr sonmp_topo_port :
S5-ETH-MULTISEG-TOPOLOGY-MIB::s5EnMsTopNmmPort :
.1.3.6.1.4.1.45.1.6.13.2.1.1.2 SNMP::Info::_load_attr sonmp_topo_ip :
S5-ETH-MULTISEG-TOPOLOGY-MIB::s5EnMsTopNmmIpAddr :
.1.3.6.1.4.1.45.1.6.13.2.1.1.3 error:snmp_translate_obj:Unknown OID hasCDP

SNMP::Info::_validate_autoload_method(hasCDP) Unable to resolve method.

[23437] 2015-11-25 15:55:22 debug  [192.168.x.x] neigh - CDP/LLDP not
enabled!

[23437] 2015-11-25 15:55:22  info discover: finished at Wed Nov 25 16:55:22
2015 [23437] 2015-11-25 15:55:22  info discover: status done: Ended discover
for 192.168.x.x

 

Regards

Martin

 

 

Von: mat...@ar...
[mailto:mat...@ar...] 
Gesendet: Freitag, 20. Februar 2015 10:54
An: net...@li...
Betreff: Re: [Netdisco] netdisco2 adding new MIBs

 

Hello Oliver, 

thanks for your answer. 

> If you're not seeing any icon, then probably the neighbor protocols 
> aren't working correctly on that uplink (CDP, LLDP, etc). You can 
> discover the devices manually using the web form at the homepage of your 
> Netdisco installation, or at the command line using netdisco-do. 

Yes, you're right. The vsp4000 do not know anything about LLDP (*damn*). It
is on the Avaya roadmap for further enhancement. Until then we'll have to
add devices manually :-( 

> OK, I will come back to this... at the moment there isn't an easy way, 
> but I will try to think of something. 

Thanks for thinking about an easy way to add new mibs. 
Maybe it's possible to create a website where mibs can be uploaded and
processed so that the result can be shared with others that are using these
mibs. But maybe I'm not thinking very well and it's more complicated than I
can imagine :-) 

Greetings Mathias 



ArcelorMittal Bremen GmbH

Vorsitzender des Aufsichtsrates: Hedwig Vergote

Vorstand der GmbH: Dr. Dietmar Ringel, Vorsitzender, Rudolf Egbert, Jörn
Pufpaff, Dr. Paul Benteler

Sitz der Gesellschaft: Bremen

Amtsgericht Bremen, HRB 15474 HB