Re: [Netdisco] Fujitsu XG2000 10GB switches and other questions

[Matthew B. <mat...@gm...>]

Hey thanks for getting back to me.

I have the manual topo file set up in the way you suggest.   The router is
defined by it's management 1GB interface IP and all links 10GB and
aggregated 10GB interfaces  are defined under that router.   When I view the
device through the web front end it will tell me what speed, duplex, port
state  and I will see the manually defined uplinks on ports  but nothing
else for that device.     Any other device in the topo works as it should.
 Heres the debug  for macsuck and arpnip.   FYI I'm runing the FreeBSD VM
 and I've updated through ports net-snmp.


netdisco# ./netdisco -D -M backbonenorth
n e t  d i s c o
--------------------------------------------------
Using Config File : /usr/local/netdisco/netdisco.conf
macsuck(backbonenorth) :
load_old_devices()
mac_getportmacs() ... found 404 MACs.
  get_device(backbonenorth)
  get_device(backbonenorth) - Connecting using cached info:
192.168.46.123/c/2
  create_device(192.168.46.123,c,2,AutoSpecify,bw:1)
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/allied
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/arista
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/aruba
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/asante
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/cabletron
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/cisco
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/cyclades
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/dell
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/enterasys
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/extreme
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/foundry
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/hp
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/juniper
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/netscreen
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/nortel
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/rfc
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/net-snmp
SNMP::Info::_global layers : sysServices.0
SNMP::Info::_global description : sysDescr.0
SNMP::Info::_global id : sysObjectID.0
SNMP::Info 2.01 ($Id: Info.pm,v 1.150 2009/06/12 22:25:32 maxbaker Exp $)
SNMP::Info::device_type() layers:00000011 id:211 sysDescr:"'E14L10' 'Z01'
'2008/11/04-07:07:04'"
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/allied
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/arista
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/aruba
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/asante
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/cabletron
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/cisco
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/cyclades
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/dell
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/enterasys
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/extreme
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/foundry
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/hp
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/juniper
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/netscreen
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/nortel
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/rfc
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/net-snmp
SNMP::Info::specify() - Changed Class to SNMP::Info::Layer2.
SNMP::Info::_global layers : sysServices.0
[192.168.46.123]  Device Type : SNMP::Info::Layer2
SNMP::Info::_load_attr i_index : ifIndex
SNMP::Info::_load_attr i_description : ifDescr
SNMP::Info::_load_attr fw_mac : dot1dTpFdbAddress
SNMP::Info::_load_attr fw_port : dot1dTpFdbPort
SNMP::Info::_load_attr bp_index : dot1dBasePortIfIndex
 Saw : 0 forwarding table entries.  Took 1 seconds.


 netdisco# ./netdisco -D -A backbonenorth
n e t  d i s c o
--------------------------------------------------
Using Config File : /usr/local/netdisco/netdisco.conf
arpnip(backbonenorth) :
  get_device(backbonenorth)
  get_device(backbonenorth) - Connecting using cached info:
192.168.46.123/c/2
  create_device(192.168.46.123,c,2,AutoSpecify,bw:1)
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/allied
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/arista
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/aruba
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/asante
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/cabletron
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/cisco
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/cyclades
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/dell
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/enterasys
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/extreme
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/foundry
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/hp
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/juniper
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/netscreen
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/nortel
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/rfc
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/net-snmp
SNMP::Info::_global layers : sysServices.0
SNMP::Info::_global description : sysDescr.0
SNMP::Info::_global id : sysObjectID.0
SNMP::Info 2.01 ($Id: Info.pm,v 1.150 2009/06/12 22:25:32 maxbaker Exp $)
SNMP::Info::device_type() layers:00000011 id:211 sysDescr:"'E14L10' 'Z01'
'2008/11/04-07:07:04'"
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/allied
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/arista
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/aruba
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/asante
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/cabletron
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/cisco
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/cyclades
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/dell
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/enterasys
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/extreme
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/foundry
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/hp
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/juniper
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/netscreen
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/nortel
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/rfc
SNMP::Info::init() - Adding new mibdir:/usr/local/netdisco/mibs/net-snmp
SNMP::Info::specify() - Changed Class to SNMP::Info::Layer2.
SNMP::Info::_global layers : sysServices.0
[192.168.46.123]  Device Type : SNMP::Info::Layer2
mac_getportmacs() ... found 404 MACs.
[backbonenorth]  Processed 0 ARP Cache entries.
SNMP::Info::_load_attr ip_netmask : ipAdEntNetMask
netdisco#



Again thanks for any help

On Wed, Jan 5, 2011 at 1:52 AM, Ingen Schenau, Jeroen van (ICTS) <
j.v...@ut...> wrote:

> On Wed, 2010-12-22 at 20:39 -0800, Matthew Bellizzi wrote:
> > Anyone have any luck getting these switches to work with Netdisco?
> > Netdisco can see the port status (i.e. up/down)  but,  it's not seeing
> > the node MACs.   I'm away from work ATM moment so I'll post debug from
> > a macsuck  tomorrow.  The Fujitsu's do not support CDP  so I setup a
> > manual topology  which leads me to my next question.  The Fujitsu has
>
> Could you post the debug output? I don't have access to any Fujitsu gear
> but perhaps the debug will give some details as to what goes wrong.
>
> >  20 10GB ports and a management 10/100 port. Unfortunately the network
> > I inherited does not have a dedicated management LAN.   So both the
> > 10GB ports and the management LAN are in the same IP address space.
> > Whats the proper way to reflect this in the topo file?
>
> If the device is managed using the mgmt LAN, I guess the best way would
> be to use the IP address of that port for all entries in the topo file.
> So both for the link between mgmt port and the switch it's connected to,
> and for the links between 10GbE ports and other switches.
>
> ... and then see what Netdisco does with it :)
>
>
> Regards,
>
> Jeroen van Ingen
> ICT Service Centre
> University of Twente, P.O.Box 217, 7500 AE Enschede, The Netherlands
>
>
>