[Ndiswrapper-general] hardware present, but no wlan0 device

[Michael R. <mjr...@gm...>]

I've got the ndiswrapper installed on Ubuntu 6.10 (kernel 2.6.17-10),
and the kernel module loads cleanly, ndiswrapper -l indicates the
drivers are installed AND it can find my hardware, but still no wlan
device is created. 

Am I missing something?


# lspci
# dmesg|grep ndiswrapper
[17179602.776000] ndiswrapper version 1.22 loaded (preempt=no,smp=no)

# ndiswrapper -l
Installed drivers:
wg511v2 driver installed, hardware present

# iwconfig
lo        no wireless extensions.
eth0      no wireless extensions.
sit0      no wireless extensions.


LSPCI info:

03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88w8335
[Libertas] 802.11b/g Wireless (rev 03)

03:00.0 0200: 11ab:1faa (rev 03)

03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88w8335
[Libertas] 802.11b/g Wireless (rev 03)
        Subsystem: Netgear WG511 v2 54MBit/ Wireless PC-Card
        Flags: 66MHz, medium devsel, IRQ 11
        Memory at 34000000 (32-bit, non-prefetchable) [disabled]
[size=64K]
        Memory at 34010000 (32-bit, non-prefetchable) [disabled]
[size=64K]
        Capabilities: [40] Power Management version 2


Thanks