Re: [Ndiswrapper-general] help needed with Shuttle PN15

[Fran <fra...@ma...>]

The error is strange...

I have the same configuration and never haved that error yet... (others yes)

The only difference to you it's that I have STACKS at 16K, but I have to se=
t=20
that because my system freezes...

Regards...


El Mi=E9rcoles, 6 de Abril de 2005 18:52, Seb Wills escribi=F3:
> Hi,
>
> I'm trying to get a Shuttle PN15 to work with ndiswrapper. I'm using
> kernel 2.6.10 (specifically Ubuntu's 2.6.10-5-686 package), which doesn't
> have CONFIG_4KSTACKS set.
>
> The PN15 is mentioned on the List in the wiki. I've tried the linked-to
> drivers for the Iogear GWU513, which have the right USB ids. When I load
> the ndiswrapper module, I get:
>
>   ndiswrapper version 1.0rc2 loaded (preempt=3Dyes,smp=3Dno)
>   ndiswrapper (NdisWriteErrorLogEntry:261): log: C000138A, count: 3
> (c0000001)
>
>   ndiswrapper (ndis_init_one_usb:191): Windows driver couldn't initialize
> the device (C0010006) awlgtnic: probe of 2-2:1.0 failed with error -22
>   usbcore: registered new driver awlgtnic
>   ndiswrapper: driver awlgtnic (WLAN-G,11/05/2003, 1.0.03) added
>
> This error is mentioned in the FAQ. I've tried unloading the ehci_hcd
> module first; that doesn't help.
>
> My /proc/interrupts says:
>
>             CPU0
>    0:    7139932    IO-APIC-edge  timer
>    1:         10    IO-APIC-edge  i8042
>    7:          0    IO-APIC-edge  parport0
>    8:          1    IO-APIC-edge  rtc
>    9:          1   IO-APIC-level  acpi
>   14:      64013    IO-APIC-edge  ide0
>   16:          0   IO-APIC-level  uhci_hcd
>   17:      35471   IO-APIC-level  Intel ICH, eth0
>   18:          2   IO-APIC-level  uhci_hcd, ohci1394
>   19:     140888   IO-APIC-level  libata, uhci_hcd, SysKonnect SK-98xx
>   23:        794   IO-APIC-level  uhci_hcd
> NMI:          0
> LOC:    7037504
> ERR:          0
> MIS:          0
>
> My USB controllers are (from lspci):
>
> 0000:00:1d.0 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6
> Family) USB UHCI #1 (rev 03) [repeated for #2,3,4]
> 0000:00:1d.7 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6
> Family) USB2 EHCI Controller (rev 03)
>
>
> I also wanted to try using the drivers from Shuttle's website
> (http://ftp.shuttle.com/Drivers/new/pn15/pn15%20driver.zip) instead of the
> IOgear drivers, however despite extracting all the .CABs, I couldn't
> assemble a full complement of driver files: the .sys, .inf and .cpl files
> are there but the .arm firmware file doesn't seem to be in there in an
> obvious form. If anyone uses the PN15 under Windows, perhaps they could
> see if the file AWUSGA02.arm is lying around somewhere in their system
> folders?
>
> If anyone can suggest anything more to try, I'd be very grateful. I happy
> to recompile the kernel with different options if that might help.
>
> Many thanks,
>
> Seb
>
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=3D6595&alloc_id=3D14396&op=3Dclick
> _______________________________________________
> Ndiswrapper-general mailing list
> Ndi...@li...
> https://lists.sourceforge.net/lists/listinfo/ndiswrapper-general