Re: [naviserver-devel] v4.99.23 Tests failing building on Debian Buster Pt1: encoding_ns_http-1.1

[Wolfgang W. <wol...@di...>]

Hi!

We are using Debian Buster without any problems.

Here are some details:

cat /etc/debian_version
10.12

dcweb:nscp 1> info patchlevel
8.6.11

dcweb:nscp 1> ns_info patchlevel
4.99.23

This is our configure script:

# --with-openssl=/usr/local assumes a manually installed openssl 
version. For debian buster (10), an entry in
# /etc/ld.so.conf.d/libc.conf for /usr/local/lib64 and calling 
"ldconfig" once is necessary

./configure --enable-64bit --prefix=/usr/local/naviserver 
--with-openssl=/usr/local/ --with-tcl=/usr/local/lib/ --enable-threads


Tcl is self compiled.

Yours,

Wolfgang


Am 06.04.22 um 15:53 schrieb Gustaf Neumann:
> Hi David,
>
> i will setup a VM for testing in your configuration, but first i have 
> to understand, what pt1/pt2 means.
> Is it sufficient to set up a Debian Buster with all available updates?
>
> The emoji/UTF-8 problem points to a Tcl problem. What exact version of 
> Tcl is used in this installation?
>
> The setup based on install-ns.sh [1]  of the release was tested with:
>
>    macOS 11.6.2, Rocky Linux 8.5, Ubuntu 20.04, OpenBSD 6.9, FreeBSD 13.1
>
> The situation of strcoll is also platform dependent (depends on 
> version of libc, e.g. the detail behavior is different on *BSD to the 
> tested Linux versions - but identical on the test cases). Maybe we 
> have to deactivate it for some platforms until these contain working 
> versions.
>
> all the best
>
> -g
>
> [1] https://github.com/gustafn/install-ns
>
> On 06.04.22 13:24, David Osborne wrote:
>> Hi there,
>>
>> We're trying to do a build of the official NaviServer v4.99.23 
>> release (from the sourceforge tarball) on Debian Buster (10.12) but 
>> we're getting some failed tests.
>>
>> First one is encoding_ns_http-1.1
>>
>> Seems it's serving an Emoji but the expected content-length is wrong 
>> upon receiving it.
>> I see there's been some discussion about Emoji support since 4.99.23 
>> (which I don't fully understand) - not sure if that's relevant here..
>>
>> * Test in question:
>>
>> test encoding_ns_http-1.1 {
>>     Send body with ns_return and charset utf-8
>> } -constraints usingExternalToUtf -setup {
>>     ns_register_proc GET /encoding {
>>         ns_return 200 "text/plain; charset=utf-8" "äöü😃"
>>     }
>> } -body {
>>     set result [ns_http run [ns_config test listenurl]/encoding]
>>     set headers [dict get $result headers]
>>     list [dict get $result status] \
>>         [ns_set iget $headers Content-Type] \
>>         [ns_set iget $headers Content-Length] \
>>         [dict get $result body]
>> } -cleanup {
>>     ns_unregister_op GET /encoding
>> } -result [list 200 "text/plain; charset=utf-8" 10 "äöü😃"]
>>
>>
>> * Reproduction steps below.
>>
>> $ uname -a
>> Linux ip-172-0-1-61 4.19.0-18-cloud-amd64 #1 SMP Debian 4.19.208-1 
>> (2021-09-29) x86_64 GNU/Linux
>> $ cat /etc/debian_version
>> 10.12
>> $ locale
>> LANG=C.UTF-8
>> LANGUAGE=
>> LC_CTYPE="C.UTF-8"
>> LC_NUMERIC="C.UTF-8"
>> LC_TIME="C.UTF-8"
>> LC_COLLATE="C.UTF-8"
>> LC_MONETARY="C.UTF-8"
>> LC_MESSAGES="C.UTF-8"
>> LC_PAPER="C.UTF-8"
>> LC_NAME="C.UTF-8"
>> LC_ADDRESS="C.UTF-8"
>> LC_TELEPHONE="C.UTF-8"
>> LC_MEASUREMENT="C.UTF-8"
>> LC_IDENTIFICATION="C.UTF-8"
>> LC_ALL=
>>
>> $ apt-get install build-essential git automake tcl8.6-dev libssl-dev
>> $ cd naviserver-4.99.23
>> $ ./autogen.sh --disable-ipv6 --with-tcl=/usr/lib/tcl8.6 
>> --enable-rpath --enable-threads --enable-symbols
>> $ make
>> $ make test
>> <snip>
>> ==== encoding_ns_http-1.1 Send body with ns_return and charset utf-8 
>> FAILED
>> ==== Contents of test case:
>>
>>     set result [ns_http run [ns_config test listenurl]/encoding]
>>     set headers [dict get $result headers]
>>     list [dict get $result status]  [ns_set iget $headers 
>> Content-Type]  [ns_set iget $headers Content-Length]  [dict get 
>> $result body]
>>
>> ---- Result was:
>> 200 {text/plain; charset=utf-8} 14 äöü😃
>> ---- Result should have been (exact matching):
>> 200 {text/plain; charset=utf-8} 10 äöü😃
>> ==== encoding_ns_http-1.1 FAILED
>>
>> Can anyone shed any light?
>> Regards,
>> -- 
>> David
>
>
>
> _______________________________________________
> naviserver-devel mailing list
> nav...@li...
> https://lists.sourceforge.net/lists/listinfo/naviserver-devel
-- 

*Wolfgang Winkler*
Geschäftsführung
wol...@di...
mobil +43.699.19971172

dc:*büro*
digital concepts Novak Winkler OG
Software & Design
Landstraße 68, 5. Stock, 4020 Linz
www.digital-concepts.com <http://www.digital-concepts.com>
tel +43.732.997117.72
tel +43.699.1997117.2

Firmenbuchnummer: 192003h
Firmenbuchgericht: Landesgericht Linz