From: Suranga K. <sur...@gm...> - 2013-02-27 15:09:54
|
Hmmm..... Thanks Cristian, you've raised a very important point. I will check this out at once ! Many thanks for the tip :-) Best regards, Suranga On Wed, Feb 27, 2013 at 4:38 PM, Cristian Falcas <cri...@gm...>wrote: > Do you have any firewall on the node? Port 4949 needs to be accessible. > > I will try this first: on the node telnet to port 4949 to see if > munin-node is running: > [root@wikivpn ~]# telnet localhost 4949 > Trying ::1... > telnet: connect to address ::1: Connection refused > Trying 127.0.0.1... > Connected to localhost. > Escape character is '^]'. > # munin node at site.example.com > > If this is working, try the same thing from the master. > > > On Wed, Feb 27, 2013 at 11:35 AM, Suranga Kasthurirathne > <sur...@gm...> wrote: > > Hi everyone, > > > > Disclaimer : I'm new to Munin, and I'm having some trouble collecting the > > correct information which will be helpful for you to figure out this > > problem. Therefore, any potential help would be really welcome ! Please > > ignore any obvious stupid questions from my part. > > > > I’m testing out Munin by installing it one two servers. I’m planning to > use > > one server as the node, and the other as the master. I’m using online > > documentation found on the Munin site > > (http://munin.readthedocs.org/en/latest/) for guidance. > > > > I was able to install the prerequisites, and went on to install Munin on > the > > master and node. But the subsequent steps (that of registering the node > with > > the master) and viewing logs fails. > > > > I’m having trouble configuring the web server as given here > > -(http://munin.readthedocs.org/en/latest/installation/configuration.html > ) > > > > And when I try to connect, I get a ‘failed to connect’ message. > > > > My most critical question is regarding the registration of the node > itself. > > For example, based on the documentation, I need to edit the Munin.conf > to do > > this. However, this doesn’t have any effect. Furthermore, the comments > > documented on this page also don’t seem to match these requirements. > > > > However, there is also a Munin-node.conf file, which is not mentioned in > the > > document, but is included in the same folder. > > > > So basically, > > > > 1) Do I need to register the master with the node as well? > > > > 2) Has anyone installed Munin using the steps given in the above > > document as of its last revision ? > > > > 3) I’m using amazon e2 instances for this purpose. Is there any > reason > > for this to fail on e2 instances due to security issues? > > > > > > -- > > Best Regards, > > > > Suranga > > > > > > > ------------------------------------------------------------------------------ > > Everyone hates slow websites. So do we. > > Make your web apps faster with AppDynamics > > Download AppDynamics Lite for free today: > > http://p.sf.net/sfu/appdyn_d2d_feb > > _______________________________________________ > > munin-users mailing list > > mun...@li... > > https://lists.sourceforge.net/lists/listinfo/munin-users > > > -- Best Regards, Suranga |