Menu
▾
▴
Re: [Mspgcc-users] FW: MSPGCC Uniarch installation instructions
|
From: Hans N. <vz...@xs...> - 2011-06-28 07:03:41
|
Hi Glib,
If you install gcc through apt-get it should always go into /usr
prefix. Looking at one of your previous emails I see all kinds of
references to /usr/local prefix. You might have a botched instance of
gcc around. Do you have a /usr/local/bin/gcc as wel as a /usr/bin/gcc?
If you have both try to remove /usr/local/bin/gcc. The gcc install
in /usr should be find as you installed that one last.
Kind regards,
Hans
On Mon, 27 Jun 2011 17:12:50 +0200
"Dovgych, Glib" <g-d...@ti...> wrote:
> Hmm, I get exactly the same error as before.
> But I've reinstalled gcc and binutils using
> apt-get autoremove ...
> apt-get install ...
>
> Should I, probably, download the latest version manually and then install them?
>
> Regards,
> Glib
>
>
> Texas Instruments Deutschland GmbH, Haggertystr. 1, D-85356 Freising. Amtsgericht München HRB 40960. Geschäftsführer: Dr. Wolfram Tietscher. Vorsitzender des Aufsichtsrates: Edgar Frank
>
> -----Original Message-----
>
> From: Sergio Campamá [mailto:ser...@gm...] On Behalf Of Sergio Campamá
> Sent: Monday, June 27, 2011 5:02 PM
> To: Dovgych, Glib
> Cc: msp...@li...
> Subject: Re: [Mspgcc-users] FW: MSPGCC Uniarch installation instructions
>
> Tell me if it works or not, so I can help you get it running...
> ---------------------------------------
> Sergio Campamá
> ser...@gm...
>
>
>
>
> On Jun 27, 2011, at 10:55 PM, Dovgych, Glib wrote:
>
> > Thanks!
> >
> > Hope it helps :)
> >
> > Best regards,
> > Glib
> >
> >
> > Texas Instruments Deutschland GmbH, Haggertystr. 1, D-85356 Freising. Amtsgericht München HRB 40960. Geschäftsführer: Dr. Wolfram Tietscher. Vorsitzender des Aufsichtsrates: Edgar Frank
> >
> > -----Original Message-----
> >
> > From: Sergio Campamá [mailto:ser...@gm...] On Behalf Of Sergio Campamá
> > Sent: Monday, June 27, 2011 4:55 PM
> > To: Dovgych, Glib
> > Cc: msp...@li...
> > Subject: Re: [Mspgcc-users] FW: MSPGCC Uniarch installation instructions
> >
> > Yes, try reinstalling the latest binutils and gcc for your system, and when you don't get the error, follow the instructions from the top again....
> >
> > Regards,
> > ---------------------------------------
> > Sergio Campamá
> > ser...@gm...
> >
> >
> >
> >
> > On Jun 27, 2011, at 10:47 PM, Dovgych, Glib wrote:
> >
> >> Hi Sergio,
> >>
> >> Here's what I got:
> >> msp430@msp430-Latitude-D610:~/temp$ gcc main.c
> >> /usr/local/lib/gcc/i686-pc-linux-gnu/4.5.2/../../../../i686-pc-linux-gnu/bin/ld: cannot find crtbegin.o: No such file or directory
> >> /usr/local/lib/gcc/i686-pc-linux-gnu/4.5.2/../../../../i686-pc-linux-gnu/bin/ld: cannot find -lgcc
> >> /usr/local/lib/gcc/i686-pc-linux-gnu/4.5.2/../../../../i686-pc-linux-gnu/bin/ld: cannot find -lgcc_s
> >> collect2: ld returned 1 exit status
> >>
> >> Should I reinstall gcc first and then install binutils?
> >>
> >> Regards,
> >> Glib
> >>
> >>
> >> Texas Instruments Deutschland GmbH, Haggertystr. 1, D-85356 Freising. Amtsgericht München HRB 40960. Geschäftsführer: Dr. Wolfram Tietscher. Vorsitzender des Aufsichtsrates: Edgar Frank
> >>
> >> -----Original Message-----
> >>
> >> From: Sergio Campamá [mailto:sca...@in...]
> >> Sent: Monday, June 27, 2011 4:38 PM
> >> Cc: msp...@li...
> >> Subject: Re: [Mspgcc-users] FW: MSPGCC Uniarch installation instructions
> >>
> >> Hey Dovgych,
> >>
> >> You have a problem with your installed version of gcc. If you see lines 91, 92, and 93 of the config file, the linker process does not find the lib files. Try upgrading your system to newer versions of binutils and gcc...
> >>
> >> As a test, create a temp folder in your home
> >>
> >> mkdir temp
> >> cd temp
> >>
> >> Then create a file with the bare minimum to compile, and compile it
> >>
> >> echo "int main(){}" >> main.c
> >> gcc main.c
> >>
> >> It should work. If you get an error complaining about libgcc and libgcc_s, you have a faulty gcc installation. Try that and tell me how it goes..
> >> ---------------------------------------
> >> Sergio Campamá
> >> ser...@gm...
> >>
> >>
> >>
> >>
> >> On Jun 27, 2011, at 7:38 PM, Dovgych, Glib wrote:
> >>
> >>> Hi all,
> >>>
> >>> I tried to follow the instructions in this guide, which are pretty much the same as in .patch files themselve, but still I did everything as it was written there.
> >>> But on the step of running binutils ./configure I've got the same error as I got before, when I was trying to do the same following the instructions from .patch file:
> >>>
> >>> msp430@msp430-Latitude-D610:~/msp430/mspgcc-20110612/BUILD/binutils$ sudo ../../binutils-2.21/configure --target=msp430 --prefix=/usr/local/mspgcc 2>&1 | tee co checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking target system type... msp430-unknown-none checking for a BSD-compatible install... /usr/bin/install -c checking whether ln works... yes checking whether ln -s works... yes checking for a sed that does not truncate output... /bin/sed checking for gawk... no checking for mawk... mawk checking for gcc... gcc checking for C compiler default output file name...
> >>> configure: error: in `/home/msp430/msp430/mspgcc-20110612/BUILD/binutils':
> >>> configure: error: C compiler cannot create executables See `config.log' for more details.
> >>>
> >>> Config.log is attached.
> >>>
> >>> I'm using Ubuntu 10.10 but I'm a newby in Linux. Is it a problem with my Ubuntu version or am I doing something wrong?
> >>>
> >>> I've googled for this error and the most common problem is not-installed Build'essential package, which I have installed before starting this stuff.
> >>>
> >>> Will appreciate any help.
> >>>
> >>> Best regards,
> >>> Glib
> >>>
> >>>
> >>> Texas Instruments Deutschland GmbH, Haggertystr. 1, D-85356 Freising. Amtsgericht München HRB 40960. Geschäftsführer: Dr. Wolfram Tietscher. Vorsitzender des Aufsichtsrates: Edgar Frank
> >>>
> >>> -----Original Message-----
> >>>
> >>> From: Sergio Campamá [mailto:ser...@gm...]
> >>> Sent: Sunday, June 26, 2011 12:30 AM
> >>> To: msp...@li...
> >>> Subject: [Mspgcc-users] MSPGCC Uniarch installation instructions
> >>>
> >>> For the lazy people as me, here's a guide on how to install mspgcc uniarch on ubuntu, it has been tested on ubuntu server 11.04 64 bits edition. Should work on other versions too.
> >>>
> >>> https://github.com/sergiocampama/Launchpad/blob/master/README.md
> >>>
> >>> Regards!
> >>> ---------------------------------------
> >>> Sergio Campamá
> >>> ser...@gm...
> >>>
> >>>
> >>>
> >>>
> >>>
> >>> ------------------------------------------------------------------------------
> >>> All the data continuously generated in your IT infrastructure contains a definitive record of customers, application performance, security threats, fraudulent activity and more. Splunk takes this data and makes sense of it. Business sense. IT sense. Common sense..
> >>> http://p.sf.net/sfu/splunk-d2d-c1
> >>> _______________________________________________
> >>> Mspgcc-users mailing list
> >>> Msp...@li...
> >>> https://lists.sourceforge.net/lists/listinfo/mspgcc-users
> >>>
> >>> ------------------------------------------------------------------------------
> >>> All of the data generated in your IT infrastructure is seriously valuable.
> >>> Why? It contains a definitive record of application performance, security
> >>> threats, fraudulent activity, and more. Splunk takes this data and makes
> >>> sense of it. IT sense. And common sense.
> >>> http://p.sf.net/sfu/splunk-d2d-c2_______________________________________________
> >>> Mspgcc-users mailing list
> >>> Msp...@li...
> >>> https://lists.sourceforge.net/lists/listinfo/mspgcc-users
> >>
> >>
> >> ------------------------------------------------------------------------------
> >> All of the data generated in your IT infrastructure is seriously valuable.
> >> Why? It contains a definitive record of application performance, security
> >> threats, fraudulent activity, and more. Splunk takes this data and makes
> >> sense of it. IT sense. And common sense.
> >> http://p.sf.net/sfu/splunk-d2d-c2
> >> _______________________________________________
> >> Mspgcc-users mailing list
> >> Msp...@li...
> >> https://lists.sourceforge.net/lists/listinfo/mspgcc-users
> >>
> >
> >
>
>
>
> ------------------------------------------------------------------------------
> All of the data generated in your IT infrastructure is seriously valuable.
> Why? It contains a definitive record of application performance, security
> threats, fraudulent activity, and more. Splunk takes this data and makes
> sense of it. IT sense. And common sense.
> http://p.sf.net/sfu/splunk-d2d-c2
> _______________________________________________
> Mspgcc-users mailing list
> Msp...@li...
> https://lists.sourceforge.net/lists/listinfo/mspgcc-users
>
|