Re: [Motion-user] kodicom 4400

[Roberto C. <rca...@lo...>]

It is a tricky card.

I got mine working after reading this:

http://www.linuxtv.org/v4lwiki/index.php/Kodicom_4400R

Good luck,
--
Roberto Carvajal
LOKO IT Services
rca...@lo...


El 13-04-2007, a las 4:19, Joerg WEBER escribi=F3:

> Hello Guillermo,
>
> if I understand correctly, this card has got 4 bttv chips with 4 =20
> inputs
> each, right?
>
> You can address the different chips using /dev/videox. The different
> inputs of each chip are addressed by the 'input' parameter.
> Be aware that motion will run in round-robin mode if you are using =20
> more
> than one input of a chip. You shoud read following before using =20
> this mode:
>
> http://www.lavrsen.dk/twiki/bin/view/Motion/=20
> MotionGuideBasicFeatures#Round_Robin_feature
>
>
> Brgds Joerg.
>
>
> Guillermo Alcala wrote:
>> Dear motion user
>>
>>
>> My name is Guillermo and im new in the list,
>> Im runing a motion 3.2.3 in a ubuntu lts server with a kodicom =20
>> 4400 card.
>> my modprobe.options is:
>>
>> options bttv card=3D132 options i2c-algo-bit bit_test=3D1
>>
>> and my dmesg writes:
>>
>> [42949393.390000] Linux video capture interface: v1.00
>> [42949393.430000] bttv: driver version 0.9.16 loaded
>> [42949393.430000] bttv: using 16 buffers with 2080k (520 pages) =20
>> each for
>> capture [42949393.430000] bttv: Bt8xx card found (0).
>> [42949393.430000] ACPI: PCI Interrupt 0000:03:0c.0[A] -> GSI 18 =20
>> (level,
>> low) -> IRQ 169
>> [42949393.430000] bttv0: Bt878 (rev 17) at 0000:03:0c.0, irq: 169,
>> latency:
>> 32, mmio: 0xfc001000
>> [42949393.430000] bttv0: using: Kodicom 4400R (master) =20
>> [card=3D132,insmod
>> option] [42949393.430000] bttv0: gpio: en=3D00000000, out=3D00000000
>> in=3D00feffff [init] [42949393.430000] i2c-algo-bit.o: (0) scl=3D1, =
sda=3D1
>> [42949393.430000] i2c-algo-bit.o: (1) scl=3D1, sda=3D0
>> [42949393.430000] i2c-algo-bit.o: (2) scl=3D1, sda=3D1
>> [42949393.430000] i2c-algo-bit.o: (3) scl=3D0, sda=3D1
>> [42949393.430000] i2c-algo-bit.o: (4) scl=3D1, sda=3D1
>> [42949393.430000] i2c-algo-bit.o: bt878 #0 [sw] passed test.
>> [42949393.430000] bttv0: using tuner=3D-1
>> [42949393.430000] bttv0: i2c: checking for TDA9887 @ 0x86... not =20
>> found
>> [42949393.430000] bttv0: registered device video0
>> [42949393.430000] bttv0: registered device vbi0
>> [42949393.430000] bttv0: PLL: 28636363 =3D> 35468950 ..<6>ACPI: PCI
>> Interrupt
>> 0000:02:00.0[A] -> GSI 21 (level, low) -> IRQ 209
>> [42949393.470000]  ok
>> [42949393.470000] bttv: Bt8xx card found (1).
>> [42949393.470000] ACPI: PCI Interrupt 0000:03:0d.0[A] -> GSI 23 =20
>> (level,
>> low) -> IRQ 177
>> [42949393.470000] bttv1: Bt878 (rev 17) at 0000:03:0d.0, irq: 177,
>> latency:
>> 32, mmio: 0xfc003000
>> [42949393.470000] bttv1: using: Kodicom 4400R (master) =20
>> [card=3D132,insmod
>> option] [42949393.470000] bttv1: gpio: en=3D00000000, out=3D00000000
>> in=3D00feffff [init] [42949393.470000] i2c-algo-bit.o: (0) scl=3D0, =
sda=3D0
>> [42949393.470000] i2c-algo-bit.o: bt878 #1 [sw] seems to be busy.
>> [42949393.850000] input: ImPS/2 Logitech Wheel Mouse as
>> /class/input/input2
>> [42949393.880000] ts: Compaq touchscreen protocol output
>> [42949394.270000] NET: Registered protocol family 10
>> [42949394.270000] lo: Disabled Privacy Extensions
>> [42949394.270000] IPv6 over IPv4 tunneling driver
>> [42949395.470000] bttv1: using tuner=3D-1
>> [42949395.470000] bttv1: registered device video1
>> [42949395.470000] bttv1: registered device vbi1
>> [42949395.470000] bttv1: PLL: 28636363 =3D> 35468950 .. ok
>> [42949395.510000] bttv: Bt8xx card found (2).
>> [42949395.510000] ACPI: PCI Interrupt 0000:03:0e.0[A] -> GSI 16 =20
>> (level,
>> low) -> IRQ 185
>> [42949395.510000] bttv2: Bt878 (rev 17) at 0000:03:0e.0, irq: 185,
>> latency:
>> 32, mmio: 0xfc005000
>> [42949395.510000] bttv2: using: Kodicom 4400R (slave) =20
>> [card=3D133,insmod
>> option] [42949395.510000] bttv2: gpio: en=3D00000000, out=3D00000000
>> in=3D00feffff [init] [42949395.510000] i2c-algo-bit.o: (0) scl=3D0, =
sda=3D0
>> [42949395.510000] i2c-algo-bit.o: bt878 #2 [sw] seems to be busy.
>> .....
>> ....
>> [42949397.550000] i2c-algo-bit.o: (0) scl=3D0, sda=3D0
>> [42949397.550000] i2c-algo-bit.o: bt878 #3 [sw] seems to be busy.
>> [42949399.550000] bttv3: using tuner=3D-1
>> [42949399.550000] bttv3: registered device video3
>> [42949399.550000] bttv3: registered device vbi3
>> [42949399.550000] bttv3: PLL: 28636363 =3D> 35468950 .. ok
>> [42949399.610000] bt878: AUDIO driver version 0.0.0 loaded
>> [42949399.610000] bt878: Bt878 AUDIO function found (0).
>>
>>
>> whit xawtv is runnin correctli in the 4 video devices and in the 16
>> composites.
>>
>> how can i define the diferents composites in the thread conf =20
>> files? i try
>> define as: /dev/video0(1)  or
>> /dev/viseo0 1
>> and dont run....
>>
>> somebody has a more than 4 input configuration?
>>
>> thans in advance Guillermo
>> ---------------------------------------------------------------------=20=

>> ----
>> Take Surveys. Earn Cash. Influence the Future of IT
>> Join SourceForge.net's Techsay panel and you'll get the chance to =20
>> share
>> your opinions on IT & business topics through brief surveys-and =20
>> earn cash
>> http://www.techsay.com/default.php?=20
>> page=3Djoin.php&p=3Dsourceforge&CID=3DDEVDEV
>> _______________________________________________
>> Motion-user mailing list
>> Mot...@li...
>> https://lists.sourceforge.net/lists/listinfo/motion-user
>> http://www.lavrsen.dk/twiki/bin/view/Motion/WebHome
>>
>>
>
>
> --=20
>
>
>
> ----------------------------------------------------------------------=20=

> ---
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to =20
> share your
> opinions on IT & business topics through brief surveys-and earn cash
> http://www.techsay.com/default.php?=20
> page=3Djoin.php&p=3Dsourceforge&CID=3DDEVDEV
> _______________________________________________
> Motion-user mailing list
> Mot...@li...
> https://lists.sourceforge.net/lists/listinfo/motion-user
> http://www.lavrsen.dk/twiki/bin/view/Motion/WebHome
>