From: Ryan K. <rk...@gm...> - 2005-10-13 01:44:35
|
This is the one I got, works great in absolute darkness. I don't have any pics handy right now but it far surpases the quality of any videocamera wit= h night shot. (way more led power here!) the led's are bright enough to give off a fairly decent deep red glow in complete darkness even. https://www2.stealthdigitalservice.com/catalog/product_info.php?products_id= =3D81 (fair warning, 1.2ghz is not legal in the US, there is also a wired only that looks similar) On 10/12/05, Balazs Bezeczky <e98...@st...> wrote: > > > > > Balazs Bezeczky wrote: > > > >> Hi all, > >> > >> I've been playing around with motion for quite a while now (with an > axis 2100+ and a Phillips usb cam) and all in all I love it! But I'm not > satisfied with the cameras: while in normal daylight use they work more o= r > less perfect, but as soon as it gets dark, they don't detect anything* - = or, > when I set the threshold low enough they detect noise very often as motio= n > (even with noise_tune on). I've been playing around with IR-lights like > this: > >> > http://www.conrad.at/scripts/wgate/ZCOP_AT/!?perform_special_action=3DPro= duktdetail&product_show_id=3D114995&p_page_to_display=3Dfromoutside > >> > >> but I guess the cams are not built for these kind of requirements (tel= l > me if I'm wrong!). I know, the other solution is to install motion sensit= ive > lamps and those'd turn the lights on but I prefer to stay "undetected"..:= ) > >> > > > > Most modern digital cams (and most cams for that matter) have IR-filter= s > that keep you from doing that very thing. Not sure why this is--perhaps > either privacy, marketting, or image-quality. I would recommend getting > cameras that specifically allow IR viewing. Also, you may want to conside= r > finding a cam that either can support a CS-type lens and a DC Iris. The > iris, of course, can improve image quality under low-light conditions. Th= e > aforementioned technology does not come cheaply. Check out the following > cameras, they are a good start. > > > > Axis (expensive!) > > http://www.axis.com/products/cam_221/index.htm > > > > Trendnet (~$300-400 US) > > http://www.trendnet.com/products/TV-IP300.htm > > > > Look at the Axis 221 (Day/Night camera) I have setup near my office, at > night (CST, US btw) -- http://www4.utsouthwestern.edu/ac-sp-pob/image.jpg > > Its night-time settings are a bit off currently, as my boss fiddled wit= h > the settings.. :( This cam and its case cost ~ $1200 US. > > > > Hth, > > Peter > > > > thanks for the links! I think I will give the grabber cards a try, as > I've seen most ccd chip equipped cams (esp. the b/w ones) work great > with an IR lamp. > I'm not really satisfied with the axis 2100 in regard of the motion > detection. maybe I still have to play with the options. for now I have > these: > > framerate 50 (not sure whether this works for a netcam?) > threshold 800 > noise_level 20 > noise_tune on > night_compensate yes > post_capture 5 > lightswitch yes > gap 60 > minimum_gap 0 > > but during daytime nearly no motion is registered, it's only sensitive > to lightswitch changes (which shouldn't be..) > > to be honest, I'm stuck with version 3.1.4, but as soon as I have my new > server I'll upgrade > > can anybody of the axis users post his/her configs? > > thanks and cheers, > Balazs > > > > > ------------------------------------------------------- > This SF.Net email is sponsored by: > Power Architecture Resource Center: Free content, downloads, discussions, > and more. http://solutions.newsforge.com/ibmarch.tmpl > _______________________________________________ > Motion-user mailing list > Mot...@li... > https://lists.sourceforge.net/lists/listinfo/motion-user > http://www.lavrsen.dk/twiki/bin/view/Motion/WebHome > |