From: Dave H. <da...@ho...> - 2016-10-09 16:59:48
|
On Mon, 10 Oct 2016 01:33:23 +1100 Adam Goryachev <mai...@we...> wrote: > On 8/10/2016 10:43, Yan Seiner wrote: > > I have motion set up and running. I am running a wired ipcam set to > > send 2 fps. > > > > Motion is set up to record 2fps. > > > > However, when motion is detected, motion only saves an image every > > 2-3 seconds. Thinking it might be slow storage, I am now saving > > the images to ramdisk, but still, motion only stores 1 frame every > > 2-3 seconds. CPU usage is around 30-60% so the process is not cpu > > bound. > > > > How do I get motion to record the full 2fps when motion is detected? > > What am I missing? > > > I'm no expert with motion, but I think you need to record a video > with your 2fps, I don't think motion will record every frame as a > stand-alone image. I'm no expert either, but I do know that it will happily just record every frame as an image, because that is exactly what I do to reduce CPU load on a Raspberry Pi. Cheers, Dave > Can you provide some details from your config files and/or logs? Have > you tried to enable more detailed logs perhaps at debug levels, and > checked them at the time of a motion event? > > Hope that helps, if not, please provide some more details on your > config and results. > > Regards, > Adam |