RE: [mjp-user] DLL-error

[Mike B. <mbr...@vi...>]

I haven't seen this error before, but I know ddraw.dll is part of DirectX.
You could try upgrading or reinstalling DirectX.  I'm running 8.1 on both my
Windows machines.  You can get DirectX from www.microsoft.com.

FYI: I've never personally tested MJP on NT4.

Mike

> -----Original Message-----
> From: mjp...@li...
> [mailto:mjp...@li...]On Behalf Of Wolfram
> Rittmeyer
> Sent: Tuesday, September 03, 2002 7:31 AM
> To: mjp...@li...
> Subject: [mjp-user] DLL-error
>
>
> HI,
>
> I get an error on NT4 as follows:
> Initialising of DLL "C:\WINNT\System32\ddraw.dll" failed. Process will
> not be ended correctly."
>
> I'm a German and the message is in German as well. But I tried to
> translate it. So maybe the message would differ slightly in English.
> Nevertheless the content should be clear.
>
> Any ideas what I can do?
>
> The JFrame (or Frame - cannot tell, since  cannot see anything) tries to
> start after confirming the message by clicking the OK-Button. But with
> the exception of the Frame itself I get nothing. No content (just like a
> screenshot of the contents at the place before the frame tried to open
> itself).
>
> I'd be glad for any ideas...
>
> Thanx,
>
> Wolfram Rittmeyer
>
>
> -------------------------------------------------------
> This sf.net email is sponsored by: OSDN - Tired of that same old
> cell phone?  Get a new here for FREE!
> https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390
> _______________________________________________
> mjp-user mailing list
> mjp...@li...
> https://lists.sourceforge.net/lists/listinfo/mjp-user